Bedienungsanleitung Nilfisk-ALTO Poseidon 7 (Seite 5 von 34) (Englisch)

493190

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

Options / model variants

Original instructions

POSEIDON 5-6-7

CAUTION!

High-pressure water jets can be

dangerous if misused. The jet

must not be directed at persons,

animals, live electrical equip-

ment or the cleaner itself.

Wear appropriate protective

clothing and eye protectors.

Do not direct the jet towards

yourself or towards other per-

sons in order to clean clothes or

footwear.

During operation of the cleaner,

recoil forces are produced at the

spraying device and, when the

spray lance is held at an angle,

a torque is also created. The

spraying device must therefore

be held firmly in both hands.

Do not use the cleaner when

other people without protective

clothing are in the working area.

Check that cleaning will not

result in dangerous substanc-

es (e.g. asbestos, oil) being

washed off the object to be

cleaned and harming the envi-

ronment.

WARNING!

This machine has been de-

signed for use with the cleaning

agent supplied or recommend-

ed by the manufacturer. The

use of other cleaning agents or

chemicals may adversely affect

the safety of the machine.

Risk of explosion – Do not spray

flammable liquids.

Do not clean delicate parts

made of rubber, fabric, etc. with

the 0° jet. Keep some distance

between high pressure nozzle

and surface in order to prevent

the surface from damage.

Do not use the high-pressure

hose for lifting loads.

NOTE!

The maximum permissible

working pressure and tempera-

ture are printed on the high-

pressure hose.

Do not continue to use the clean-

er if the mains power lead or

high-pressure hose is damaged.

Ensure adequate air circulation.

Do not cover the cleaner or op-

erate it in inadequately ventilated

rooms!

Store the cleaner where

it will not be exposed to

frost!

Never operate the cleaner with-

out water. Even brief shortages

of water result in severe dam-

age to the pump seals.

Switch off the cleaner after max.

3 minutes.

Water connection

This high pressure

washer is only al-

lowed to be connected with the

drinking water mains, when an

appropriate backflow preventer

has been installed, Type BA ac-

cording to EN 60335-2-79. The

backflow preventer can be or-

dered under number 10641117

7,106411178,106411179,1064

11184. The length of the hose

between the backflow preventer

and the high pressure washer

must be at least 12 metres (min

diameter 3/4 inch) to absorb

possible pressure peaks. Op-

eration by suction (for example

from a rainwater vessel) is car-

ried out without backflow pre-

venter. Recommended suction

set: 61256. As soon as water

has flown through the BA valve,

this water is not considered to

be drinking water any more.

Operation

CAUTION!

Unsuitable extension leads can

represent a source of danger.

Always unwind cord from the

reels completely to prevent the

power cord overheating.

Plugs and connectors of mains

power leads must be at least

splash water-proof.

Do not damage the mains power

lead (e.g. by driving over it, pull-

ing or crushing it).

Disconnect the power cord by

pulling the plug only (do not pull

or tug the power cord).

Electrical equipment

CAUTION!

Never spray electrical equip-

ment with water: danger for per-

sons, risk of short-circuiting.

The cleaner may only be con-

nected to a correctly installed

plug socket.

Switching on the cleaner may

cause voltage fluctuations.

Voltage fluctuations should not

occur if the impedance at the

transfer point is less than 0.15

If in doubt ask your local elec-

tricity supplier.

Maintenance and repair

CAUTION!

Always remove the plug from

the mains plug socket before

cleaning or carrying out mainte-

nance work on the cleaner.

Carry out only the maintenance

operations described in the oper-

ating instructions. Use only original

Nilfisk-ALTO spare parts.

Do not make any technical modi-

fications to the high-pressure

cleaner.

Ensure that the machine is regu-

larly serviced by Authorised Nilfisk-

ALTO dealers in accordance with

the maintenace plan. Failure to do

so will invalidate the warranty.

Nilfisk-ALTO No. 104209627

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nilfisk-ALTO Poseidon 7 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nilfisk-ALTO Poseidon 7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info