319098
8
Zoom out
Zoom in
Vorherige Seite
1/96
Nächste Seite
8
Extreme
DE
FR
ES
PT
I
T
NL
SV
NO
DA
FI
EN
Changing the active carbon lter
The active carbon lter removes bad
smell from the exhaust air. Change the
active carbon lter 1-2 times a year.
The active carbon lter is located
behind the dust bag and pre lter.
Always use original dust bags and
lters.
1. Release the hose connection from
the suction inlet by turning the
hose connection counter-clockwise
and then remove it.
2. Open the lid by pushing the button.
3. Seal the dust bag by pulling the
cardboard ap.
4. Remove the dust bag.
5. Take out the lter holder.
6. Remove the old active carbon lter.
7. Fit the new active carbon lter.
8. Insert the lter holder on the pin
and push in place.
9. Insert the dust bag. If the dust bag
is closed push the cardboard ap
down to open it. Check that the
dust bag is correctly tted.
10. Close the lid.
11. Insert the hose connection into the
suction inlet and twist it clockwise
to lock it.
Changing the HEPA lter
The HEPA lter cleans the exhaust
air from micro particles the dust bag
can not keep. The HEPA lter can
not be brushed or washed clean. The
X150, X200, X210, X250 and X300
models have an HEPA lter indicator
that shows when to change the HEPA
lter. Always use original dust bags
and lters.
1. Open the lid on the machine under-
side with a coin or a screw driver.
2. Take out the HEPA lter.
3. Insert the new HEPA lter. Check
that the HEPA lter is correctly
tted.
4. Put the lid back and close it with a
coin or a screw driver.
4
Adjust the suction power
Models with a sliding valve on the
hose handle - Eco, X100, X110,
X150, X200 and X210
The suction power is maximal with
the sliding
valve closed
and minimal
when all open.
Adjust the
suction power
by putting the
sliding valve
in the desired
position.
Models with three step adjustment
- X150, X200 and X210
The suction power
is adjusted with
the sliding valve
and also with the
touch control on
the machine.
Models with ve step adjustment
remote control - X250, X300
The suction power
is adjusted on the
remote control on
the hose handle.
Hose handle with
remote control
battery replacement,
battery type CR2032
1. Carefully remove the remote control
unit with a small, at tool.
2. Remove the old
battery - replace
with new type
CR2032.
3. Carefully reas-
semble the con-
trol unit back to
the hose handle
by pushing it in
place at handle.
5
5b
Eco, X100, X110,
X150, X200, X210
X250, X300
X150, X200, X210
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Nilfisk extremex100 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info