319098
9
Zoom out
Zoom in
Vorherige Seite
1/96
Nächste Seite
9
Extreme
DE
FR
ES
I
T
NL
SV
NO
DA
FI
EN
Cleaning tips
Adjust the suction power by means
of the touch control or remote control
or the sliding valve on the bent tube
depending on model.
Crevice nozzle
Use the crevice nozzle for narrow
spaces.
Upholstery nozzle
Use the upholstery nozzle for
upholstered furniture.
Brush nozzle
Use the brush nozzle for curtains and
window sills.
Hard oor nozzle
Use the nozzle for hard oors.
Combination nozzle
Adjust the combination nozzle
depending on type of oor.
Turbo nozzle
Use the turbo nozzle for ef cient
carpet cleaning.
Electro nozzle
Use the electro nozzle for deep
cleaning of carpets.
The crevice, upholstery and brush
nozzle are located under the acces-
sory lid. The accessoriy lid is opened
by pressing the release button down-
wards. The lid is closed by pushing at
the centre of the button.
The different models of these vacuum
cleaners can include different nozzles.
Thermal fuse
The machine is tted with a thermal
fuse, which prevents the machine from
overheating. If the thermal fuse blow,
the machine automatically switches off
the motor and must cool before it can
be started again.
Restart
1. Turn off the machine and unplug
from the wall socket.
2. See to that nothing blocks the air
ow through bent tube, hose, tube,
nozzle, dust bag or lters.
3. Let the machine cool.
4. Plug in the machine again and
push start button. The machine will
not start until cool enough. If the
machine does not start turn it off
and unplug. Try again in a while.
WARNING
When activating the automatic
cord rewind, care must be taken
as the plug at the end of the cord
can swing during the last part of the
rewinding. It is recommended that you
hold on to the plug while rewinding.
6
9
7
8
13
10
11
12
Parking the tube and nozzle
There are two grooves for parking.
One located on the underside of the
machine to use when machine stands
on the back. The other on the back
of the machine, to be use when the
machine is standing on its wheels.
Standby mode
Model X150, X200, X210, X250 and
X300 automatically puts the machine
in standby mode when the nozzle is
parked in the groove on the machine
back side.
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Nilfisk extremex100 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info