Bedienungsanleitung Nissin MG8000 Extreme - Nikon (Seite 2 von 11) (Englisch)

667851

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

MG8000 Flash Mode and Functions - to be set on the flash unit.

These safety instructions refer to important information on how to use this

product safely and properly. Please read the following instructions before using

the product.

MENU SCREEN FOR MAIN MODES

5 6

3 4

Flash light is fully controlled by the camera for the most proper exposure.

SAFETY INSTRUCTIONS

Nomenclature

WARNING

The flash unit contains high voltage electric parts. Do not try to open or repair the flash unit. Return it back to the

repair service station or the store you bought it from.

Do not touch the inside parts from the opening when the unit was dropped or broken.

Do not shoot the flash directly to the eyes at short distance. It may damage the eyes.

When taking a flash picture, especially toward a baby, it is recommended to keep the flash unit at least 1 meter

(3.3feet) away from the subject. Or use diffuser or bounce the light to the ceiling or wall to soften its intensity.

Do not place the flash unit near any flammable gas, chemical or such liquids. It may cause fire or electric shock.

Do not touch the flash unit with wet hands or use in the water. The flash unit carries high voltage inside and it

may cause an electric shock.

Do not shoot the flash unit directly at the driver of automobiles or such vehicles.

Do not set the flash window close to the human body and shoot, which may get scalded.

Place the batteries correctly in position. Placing the batteries in wrong polarity may cause leakage, exothermic

heat or explosion.

Do not touch the metal parts after long time flashing, which may get scalded.

CAUTIONS

Do not leave or store the flash unit in the temperature over 40ºC, such as in the automobile.

The flash unit is not water resistance. Keep the unit away from rain, snow and humidity.

Do not use benzene, thinner or other alcoholic agents to clean the unit.

Do not use this flash unit with the cameras which are not recommended in compatibility list at official

website, otherwise it may damage the camera’s circuitry.

Remove the batteries when not in use for a longer period of time.

Do not have a heavy impact to the flash unit, nor throw it onto a hard surface floor.

When using the external power pack, read the safety instructions carefully and follow the operation manual.

This sign refers the danger or serious damage.

This sign refers the damage or defect.

Full Automatic Mode

TTL Program Mode

Manual Setting Mode

Multi- flash Mode

Wireless Remote Flash Mode

Custom Setting Mode

Full Automatic Mode

…

page 10

Flash light is automatically controlled by the camera but the flash exposure

TTL Program Mode

page 12

Manual Mode -Selecting the desired manual power on the flash unit,

Manual Setting Mode

page 16

Multiple lighting exposes the playback photos in one frame of picture.

Multi-flash Mode

page 22

Placing multiple numbers of flashes (slave flash) off camera and controlling the

Wireless Remote Flash Mode

page 24

Variety of custom settings is available for own default value.

Custom Setting Mode

page 29

value can be compensated.

Av poriority Mode- Selecting the desired f-stop on the flash unit.

creative TTL lighting.

Flash stand

Extra

battery magazine (optional)

Soft Case

Diffuser

Advanced functions are provided in some operation modes –

to be set on the flash unit

Functions by Camera setting – The flash is automatically

controlled by the camera

ADVANCED FUNCTIONS

Flash synchronizes to the faster shutter speed than regular synchronization speed.

High speed shutter synchronization

page 31

The flash fires just before the rear curtain closes. A moving subject will appear

Rear curtain synchronization

page 31

Flash exposure level is automatically compensated on the sequence of frames

Auto Flash Bracketing

page 31

Blinks of flash released before actual effective flash eliminate

Red-eye reduction

page 32

The flash is controlled at slow shutter speeds considering the dim condition of the

Slow Shutter Synchronization

page 32

Flash exposure can be locked at the main subject while moving the framing.

Fv. Lock

page 32

Fv.

Lock

Advanced

Functions

Operation Modes

Sub-Flash

Manual Zoom

Slave Mode

F.Stop Setting

ISO setting

TTL Program Mode

Manual Setting Mode

Manual Setting Mode*1

Manual Setting Mode*2

Manual Setting Mode

*1 Effective on at Universal Slave function in Manual Power operation and when using MG8000 with film

type camera or with non dedicted camera.

*2 Effective on Universal Slave function, and when using MG8000 with film type camera or with non

dedicated camera.

such moving marks behind.

pre-set in the camera.

background.

the red eye problem.

Flash head/

Wireless transmitter

Sub-Flash

AF-assist light

External auto exposure sensor

Rotating

display screen

Set button

Pilot lamp (Test flash button)

On/Off switch (System lock button)

Select button

Battery magazine

Lock ring

X-terminal

USB service port

Power Pack socket

Hotshoe contacts

Foot lock pin

External service

box

Mounting foot

Multifunction button

Remote/ Slave sensor

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nissin MG8000 Extreme - Nikon Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nissin MG8000 Extreme - Nikon

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info