Bedienungsanleitung Nivona NICR821 (Seite 14 von 16) (Englisch)

774459

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Attention: Please remove any descaler residues on the casing immediately with a damp cloth.

5.6. Regular manual cleaning

Note: Please follow these cleaning instructions. Working with foodstuffs demands the highest degree of

cleanliness.

Attention: Never immerse the appliance in water! Do not use abrasive cleaning agents.

➔Use a soft, damp cloth for cleaning the casing inside and out.

➔Empty drip tray (g. 1/N) and used coffee container (g. 1/O) at the latest when this is indicated

on the display (only when the appliance is switched on!).

Note: Make sure when cleaning the drip tray (g. 1/N) that both metal contacts at the back are clean

and dry! Use a little detergent every now and again.

➔The water tank should be rinsed daily with clear water and then be re-lled daily with fresh cool

water.

Note: Dried milk residue is difcult to remove.

➔Therefore clean frother, hose and spout regularly.

Tip: From time to time (ideally each time the appliance will not be used for a while, at any rate in

regular intervals!) the frother needs to be completely dismantled and thoroughly cleaned under running

water.

➔Remove the panel from the spout (g. 1/P).

➔Pull the frother down and out (g. 11) and dismantle it completely (g. 1/R).

➔Reinsert the assembled frother into the spout (g. 11).

➔Replace the cover (g. 1/P).

Tip: Your appliance is equipped with back rollers (g. 1/Q), which allows you to move the appliance on a

at working top. This way, you can also clean the space underneath the appliance.

5.7. Cleaning the brew unit

Attention: Remove the brew unit only when the appliance is switched off.

Attention: Please clean the brew unit regularly, for instance after each cleaning programme, but at least

once a month. Otherwise your warranty could be compromised.

When necessary the brew unit can be removed and cleaned under cold, running water. Never use any

cleaning agent, but clear, cold water only! For hygienic reasons we recommend the removal and clean-

ing of the unit thoroughly after each run of the cleaning program (see 5.4.).

➔Open the service door on the right of the casing (g. 1/L) towards you.

➔Remove the brew unit by pressing the red switch and turning the handle all the way to the left

until it snaps into place (g. 12).

➔Carefully remove the brew unit using the handle.

➔Clean the brew unit under running cold water and let it dry.

➔Reinsert the brew unit carefully and lock by pressing down the red switch and turning the handle

all the way to the right until it snaps into place.

➔Close the service door and in doing so carefully place the pivots at the back of the door into the

notches. Make sure that the door (g. 1/L) completely snaps back into place.

5.8. Changing the lter

The lter will be at after about 50 l of water have been drawn. The display shows

“CHANGE FILTER”.

You can still make coffee, but we recommend changing the lter immediately.

➔Turn the rotary control to “SETTINGS” and press it.

➔Turn the rotary control to “FILTER” and press it.

➔Turn the rotary control to “INSERT FILTER? YES”, so the appliance recognizes the new lter:

➔Empty the water tank (g. 1/F and 2) and unscrew the lter, using the integrated tool at the end

of the measuring spoon (g. 4).

➔Discard the lter.

➔Press the rotary control.

The display shows “INSERT FILTER” or “FILTER INSERTED” in case the lter has already been

replaced.

➔Screw in the new lter into the dedicated slot in the water tank, using the integrated tool at the

end of the measuring spoon (g. 4).

Note: Do not overtighten or bend the lter.

➔Fill the tank with fresh water and insert it back in the appliance.

➔Place a sufciently large bowl (about 0.5 l) under the spout (g. 1/E) and press the rotary con-

trol.

The system is now being rinsed. The display shows “FILTER RINSES”.

➔After a short while no more water is dispersed from the spout.

The system reheats and the appliance is ready for use again. The display shows the main menu.

Attention: The lter needs changing after a maximum of two months if the appliance is not in regular

use. The display will show no status message. Use the dial (by the month) at the top of the lter to

select the date of change.

5.9. Maintenance status

The appliance will show you if cleaning or descaling are imminent.

➔Turn the rotary control to “MAINTENANCE” and press it.

➔Turn the rotary control to “MAINTENANCE STATUS” and press it.

The display shows:

“CLEANING SYSTEM”

“CLEANING LATER”

“DESCALING”

The respective bar will show you if cleaning or descaling are imminent. The further to the right it

progresses, the sooner one or both need to be done.

Note: Please clean and descale regularly, at the latest when the display asks you to! Otherwise your

warranty could be compromised.

86 87

 

5. Cleaning and maintenance 5. Cleaning and maintenance

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nivona NICR821 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nivona NICR821

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info