Bedienungsanleitung Numark CM100 (Seite 8 von 12) (Englisch)

23424

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

CM100

- The Leader in DJ Technology

MIXER FEATURES

5 6

We have divided this section into various functional

blocks: Inputs, Microphone, Crossfader, Equalizer, Outputs,

and Headphone Cueing. It is important to learn how each of

these work.

INPUTS

1. Input faders - control individual source levels in the

mix.

2. Input Toggle Switches - select which source will be

live to that channel based on what you have connected to

the rear panel input section.

3. Pre-fader Gain Controls – adjust the pre-fader

volume for cleaner sound.

MICROPHONE

4. Mic Gain Controls – The DJ Mic Fader controls

the DJ Mic volume for the Neutrik™ “Combo”

connector. The Mic 2 Fader controls the Mic volume

for the 1/4” connector on the rear of the mixer.

5. Mic Talkover/On/Auto-Talkover Switch –

controls DJ Mic only. Mic 2 activation is controlled only

through the Mic 2 level fader.

Talkover turns down the input level of your music

sources from Channels 1-4.

Auto-Talkover automatically reduces the input level of

Channels 1-4. This works with the talk-over

sensitivity adjustment. Talkover is very useful for

making announcements without adjusting any levels.

6. Talkover sensitivity adjust – determines the point

in which auto-talkover activates. The more sensitive the

adjustment, the quieter you need to speak into your

microphone to activate auto-talkover.

7. Treble and Bass Controls – for fine-tuning the tone

of your voice on both mics through the sound system.

The controls are detented for setting tone "flat". For best

results, use a dynamic cardioid microphone.

8. Neutrik™ “Combo” connector - allows connection

of either a 1/4” jack or an XLR jack. This is ideal for

connecting an XLR gooseneck directly into the mixer.

CROSSFADER

9. Crossfader Assign Knob - determines which input

channel will be heard when the crossfader is moved

towards the knob.

Note: All channels not assigned will remain active.

10. Replaceable Crossfader - achieves clean segues

between the two input channels selected by the Crossfader

Assign.

In this example "Hard left" selects Channel 1 and "Hard

right" selects Channel 4. With the crossfader centered,

both assigned channels are live. Use the crossfader for fast

and seamless segues from one selected channel to the

other.

Note: The crossfader is user replaceable in case of failure.

Simply unscrew the two large screws that hold it in place,

lift it out and disconnect its cable. Re-attach the new

crossfader and screw the mounting plate back onto the unit

- you’re back in business!

11. Fader Start – activates the crossfader to send play and

cue commands to your auto-start Numark CD player or

other popular brand. For fader start, attach your mixer to a

remote start CD player using industry standard

1/8”(3.5mm) cables. When you move the crossfader

toward the active channel, the attached CD player will

start. When it is moved away, that side will cue (similar

to pressing the cue button).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Numark CM100 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info