Bedienungsanleitung Numark N4 (Seite 4 von 36) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

618147

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

VirtualDJ LE SETUP

Before you can begin using N4 with your computer, you must install the included VirtualDJ LE software:

1. Please insert the included installation disc into your computer's DVD/CD drive.

2. Open the CD to view its contents, Open the folder titled "PC." and double-click the ".Msi file".

3. Follow the on-screen instructions.

To start using N4:

1. Use the included power adapter to connect the N4 to a power outlet..

2. Connect N4 to an available USB port on your computer. (If possible, use a USB port on the rear panel of your

computer.)

3. Open VirtualDJ LE by double-clicking the icon on your computer's Desktop (if you created a Desktop shortcut)

or by going to Start  All Programs  VirtualDJ.

For more information on how to use VirtualDJ LE, please see the manual located on the disc.

Note: Full Screen video mapping is not supported in VirtualDJ LE.

MAC

Before you can begin using N4 with your computer, you must install the included VirtualDJ LE software:

1. Please insert the included installation disc into your computer's CD-ROM drive.

2. Open the CD to view its contents, open the folder titled "Mac." and double-click the ".pkg” file.

3. Follow the on-screen instructions.

To start using N4:

1. Use the included power adapter to connect the N4 to a power outlet..

2. Connect N4 to an available USB port on your computer. (If possible, use a USB port on the rear panel of your

computer.)

3. Open VirtualDJ LE by going to Applications  VirtualDJ.

For more information on how to use VirtualDJ LE, please see the manual located on the disc.

Note: Full Screen video mapping is not supported in VirtualDJ LE.

TIMECODE SETUP

To setup N4 Deck 1 for use with timecode (available only in VirtualDJ Pro):

1. Set the N4 rear panel USB IN REC/TIMECODE switch to ‘TIMECODE’.

2. Set the N4 front panel Source switch to “PC” to avoid hearing the timecode signal beeps.

3. Adjust the Line/Phono switch to the appropriate setting and send a timecode signal through the N4 Input 3 or

Input 4.

4. In VirtualDJ Pro, go to the Config menu and set the Sound Setup Inputs tab to “Single Timecode”.

5. In Timecode Config, select a Vinyl preset that matches the timecode signal source that you are sending

through the N4 input.

6. Adjust the settings to ensure Quality reaches 100% to control Deck 1.

To setup both N4 decks for use with timecode (available only in VirtualDJ Pro):

1. Set the N4 rear panel USB IN REC/TIMECODE switch to ‘TIMECODE’.

2. Set the N4 front panel Source switches to “PC” to avoid hearing the timecode signal beeps.

3. Adjust the Line/Phono switch to the appropriate setting and send a timecode signal through N4 Inputs 3 and 4.

4. In VirtualDJ Pro, go to the Config menu and set the Sound Setup Inputs tab to “Timecodes”.

5. In Timecode Config, select a Vinyl preset that matches the timecode signal sources that you are sending

through the N4 inputs.

6. Adjust the settings for Line 1 and Line 2 to ensure Quality reaches 100% to control both decks.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Numark N4 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info