Bedienungsanleitung NutriBullet Baby Bullet (Seite 3 von 59) (Englisch)

703090

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

• Make sure the blade base is securely screwed onto the Short Cup or Batchbowl

before placing it on the Power Base.

• Never leave the NutriBullet Baby unattended while it is in use.

• Never run the NutriBullet Baby without food or liquid contents in the Cup or Batch

Bowl.

• Close supervision is necessary when any appliance is used near children.

• To reduce the risk of injury, be certain that the blade is completely and ﬁrmly

screwed on to the Short Cup or Batchbowl container before operating the appliance.

• Do not use the NutriBullet Baby outdoors.

• Blades are sharp. Handle carefully.

• Check gasket to make sure it is completely seated in the Baby Blend Blade or

Milling Blade base before each use.

• Do not attempt to defeat the cover interlock mechanism.

• Do not use the Date-Dial Storage Cups to freeze foods. Use the Easy-pop Batch Tray

to freeze foods.

• Do not ﬁll the date dial storage cups more than 2/3 full.

• Do Not ﬁll the batch tray freezer storage containers more than 2/3 full prior to freezing.

BATCHBOWL SAFEGUARDS

• Always operate the Batchbowl with the Lid ﬁrmly in place.

• Never blend carbonated beverages. Released gases can cause pressure to build up

and the container to burst, resulting in possible injury.

• When blending hot liquids, remove center piece of two-piece cover.

• Always ensure that the two-piece cover is ﬁrmly in place before operating the

appliance.

• Never insert food into the Batchbowl by hand while the NutriBullet Baby is running.

Remove the Batchbowl from the Power Base to add ingredients.

CLEANING SAFEGUARDS

IMPORTANT SAFEGUARDS AND

CAUTIONARY INFORMATION

SAVE THESE INSTRUCTIONS

FOR YOUR SAFETY, CAREFULLY READ ALL INSTRUCTIONS

BEFORE OPERATING YOUR NutriBullet Baby.

When using electrical appliances, basic safety precautions should always be followed

including the following:

• Do not use appliance for other than intended use.

• To avoid risk of electrical shock, never immerse the cord, plug or Power Base in

water or other liquids.

• The use of attachments not recommended or sold by the manufacturer may cause

ﬁre, electric shock or injury.

• The use of attachments, including canning jars, not recommended by the

manufacturer may cause a risk of injury to persons.

• Unplug the NutriBullet Baby when it is not in use, before putting on or taking off

parts, and before cleaning or assembling.

• Do not pull or twist the power cord.

• Do not allow the cord to dangle over the edge of a counter or table.

• Do not allow the cord to touch hot surfaces such as the stove.

• Periodically inspect the cord and plug for damage. Do not operate any appliance

with a damaged cord or plug, if the appliance malfunctions, or is dropped or

damaged in any manner. If damaged, contact Customer Service for assistance in

obtaining a replacement.

• Keep hands and utensils away from the blade while chopping or blending food to

reduce the risk of severe injury or damage to the unit. A scraper may be used to

move food around, but only when the unit is not running.

• Avoid contacting moving parts.

• NEVER LET THE MOTOR RUN FOR MORE THAN ONE MINUTE AT A TIME AS IT

CAN CAUSE PERMANENT DAMAGE. IF THE MOTOR STOPS WORKING, UNPLUG

THE POWER BASE AND LET IT COOL FOR A FEW HOURS BEFORE ATTEMPTING

TO USE IT AGAIN. YOUR NUTRIBULLET BABY HAS AN INTERNAL THERMAL

BREAKER THAT SHUTS OFF THE UNIT IF IT OVERHEATS. THE POWER BASE

WILL RESET WHEN THE THERMAL BREAKER COOLS DOWN.

• DO NOT USE ANY OF THE NUTRIBULLET BABY COMPONENTS (CUPS, LIDS,

BLADES, BATCH BOWL, BATCH TRAY, MOTOR) IN THE MICROWAVE.

• Always use your NutriBullet Baby on a clean, ﬂat, hard, dry surface.

• Do not blend hot liquids in the short cup or any closed top container.

• Never blend carbonated beverages. Released gases can cause pressure to build

up and the container to burst, resulting in possible injury.

• DO NOT PUT THE NUTRIBULLET BABY BLADE HOLDERS AND OTHER PLAS-

TIC PARTS IN THE DISHWASHER. SIMPLY HAND WASH WITH WARM

SOAPY WATER.

• DO NOT SUBMERGE THE POWER BASE IN WATER. WIPE OFF WITH A DAMP

CLOTH. ALWAYS UNPLUG BEFORE CLEANING.

• THE NUTRIBULLET BABY BLADE HOLDERS AND OTHER PLASTIC PARTS

SHOULD NOT BE STERILIZED IN BOILING WATER OR STEAM FOR ANY

REASON AS THIS WILL WARP THE PLASTIC.

• WHEN WASHING BLADES, DO NOT ATTEMPT TO REMOVE THE GASKET

RING. SIMPLY HAND WASH THE BLADES IN WARM SOAPY WATER.

• DO NOT EXPOSE BLADE HOLDERS AND OTHER PLASTIC PARTS TO

EXTREME RAPID TEMPERATURES CHANGES, AS THIS MAY WARP OR

DAMAGE THE PLASTIC.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NutriBullet Baby Bullet Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NutriBullet Baby Bullet

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info