47336
105
Zoom out
Zoom in
Vorherige Seite
1/148
Nächste Seite
Using COMMAND CENTER
ADVANCED OPERATION GUIDE 8-19
Advanced > Protocols > TCP/IP > IP Filters
IP filters specify a host or network of hosts that are allowed to access the printing
system. An entry should be a network number or host IP address. Up to 10 access
list entries are allowed.
When there are no entries, access is allowed to all hosts.
To allow all hosts on network 192, enter 192.0.0.0 and 255.0.0.0.
To allow one host 192.168.1.2, enter 192.168.1.2. The default mask
255.255.255.255 is assumed and subnet mask can be left blank.
Advanced > Protocols > TCP/IP > Logical Printers
Logical Printers allows you to use this machine as four virtual printers.
Each logical printer can be used with either FTP, LPR, or IPP protocols. All printout
to a non-existent port will be accomplished to Logical Printer1.
Item Description
TCP/IP Port Number Specifies the IP address for the logical printer as well as the TCP raw port
number (9100, etc.). Conversion is applied to data that is input to the specified
raw port in accordance with the designated logical printer. This port is invalid if it
is given a port number that is the same as that of an already specified port (e.g.
FTP or LPD).
Bi-directional Printing Enables or disables bi-directional printing using the TCP/IP raw port. If you turn
this setting Off, all data received from the printer will be ignored.
In order to have the data that is received from the printer returned to the client
when printing with PostScript, PJL and other such commands, it is necessary to
enable bi-directional printing.
Start of Job Strings Specifies the character string sent to the printer before output directly to the
output port (lp port). Specifies the character string if it is necessary to transmit the
control code before printing.
End of Job Strings Specifies the character string sent to the printer after directly outputting to the
output port (lp port). Specify a character string, if it is necessary, to send a control
code after printing.
105

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Oce OP1018 Advanced Operation Guide wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info