47369
26
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
Performing the Required Operation at the Scanner
3-6
Scan setting
The scan setting screen is displayed when scanning originals. To carry out the various settings, perform the following
procedures. After completing the scan settings, if you set an original in the scanner and press the Start key, scanning will
start.
A Auto Exposure key Press this key to select the automatic exposure setting.
B Image concentration adjustment key Press these keys to select an exposure level.
Notes 7 levels in the normal mode, 13 levels in the maximum mode.
If the automatic exposure mode is set, all the exposure indicators are off.
C Auto%/100% key Press this key when you enable automatic paper orientation selection
depending on the original in the gray scale mode.
D Original Image Type key Press this key to select the original image type.
Note The Photo mode cannot be selected with the Send E-mail function.
E Original Size key Press this key to specify the original size.
F Paper Select key Press this key to specify the transmission (image) size. The scanned
original image will be automatically reduced or enlarged to the specified size.
Note In the gray scale mode, the orientation of paper will be changed with this key. To enable again the
automatic paper orientation selection depending on the original, press the AMS/100% key.
G Scanner Function key The following settings can be adjusted.
Resolution
File type
Original type
•Auto selection
Border erase
Original set direction
Continuous scanning
Output by page
Note For details on each setting, see the Online Manual.
H Enter key Press this key to confirm the setting in various setting screens.
IStart key Press this key to start scanning.
J Stop/Clear key Press this key to stop scanning, clear an entered value or return to the
previous screen.
K Scanner key If you select this key to cancel scan setting, the scan setting screen will
appear.
K
G
C
E
F
H
J
D
A
B
I
26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Oce OP1020 Operation Guide Scan System Set-up wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info