Bedienungsanleitung Oceanic Veo 1.0 (Seite 2 von 2) (Englisch)

551891

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

POWER SUPPLY

(refer to Reference section of the Operating Manual)

•

VEO 1.0 - (1) 3 volt type CR2450 Lithium Battery, 560 mAhr

•

Shelf Life - up to 5 years

•

Use Life -100 hive hours if (1) 1 hour dive per day up to 300 dive hours if (3) 1 hour

dives per day

•

Replace the Battery prior to dive trips and vacations when multiple days of diving

are planned.

•

Calculations and settings retained after Battery replacement.

•

Dispose of battery according to local regulations that apply to Lithium cells.

EU (EUROPEAN UNION) DIRECTIVES

•

The VEO 1.0 is in compliance with the essential safety requirements of EU EMC

directive 89/336/EEC and PPE directive 89/686/EEC.

•

EU standards comformity certied by SGS United Kingdom Ltd, Weston -

super - Mare, BS22 6WA, UK, Notied Body No. 0120.

•

The VEO 1.0 is designed to comply with EN13319:2000 Diving accessories - Depth

gauges and combined depth and time measurement devices - Functional and safety

requirements, test methods. Any information on decompression obligation displayed

by equipment covered by this standard is explicitly excluded from its scope.

Doc. No. 12-5208-r01 (11/3/09)

NORM (Dive)

ALT 1

ALT 2

O2%, FO2,

PO2

Time, Temp

DS Preview

Deep Stop

Safety Stop

NORM (Surface)

at 2 ft (0.6 M)

for 1 sec

at 5 ft (1.5 M)

for 5 sec

at 1/2 Max Depth for

2 min after Depths

> 80 FT (24 M)

to Main

No Deco Main

at 15 FT (4.5 M) for

3 min after Depths

> 30 FT (9 M)

< 2s

ACTIVATION

Press and release the button. The display comes full on displaying all segments then a

countdown sequence, then the Surface Main screen.

MAINTENANCE

(refer to the Reference section of the Operating Manual)

•

Rinse thoroughly with fresh water after activities in salt water.

•

Annually >> take the VEO 1.0 to an Authorized Oceanic Dealer for inspection.

Replace the Battery prior to dive trips and vacations when multiples days of diving are

planned.

SPECIFICATIONS

(refer to the General section of the Operating Manual)

•

Max Operating Depth = 400 FT (120 M)

Depth Accuracy - +/- 1% full scale

•

Time Accuracy - +/- 1 second per day

•

Dive Mode - entered at 5 FT (1.5 M) for 5 seconds.

•

Post dive Surface Mode after 10 minutes on surface following ascent to 2 FT (0.6

M) for 1 second.

•

Repetitive Dive - NORM (or GAUG) after 10 minute post dive SI, FREE after 1 minute

post dive SI.

•

Altitude Adjustments (of Ni-O2 calculations & depth calibration) - begin at 3,001

feet (916 meters) elevation, continues up to max operating elevation of 14,000 feet

(4,270 meters).

•

Operating Temperature (in air) - 20 to 140 F (- 6 to 60 C)

•

Operating Temperature (in water) - 28 to 95 F (- 2 to 35 C)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oceanic Veo 1.0 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oceanic Veo 1.0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info