674346
5
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
OPERATION
CLEANING AND MAINTENANCE
This overblanket is intended for warming the human body. It may
only be used as a cover.
1. Connect the power cable
connector to the overblanket
connector.
• Ensure the connector is
pushed home unl
the locking catch engages.
2. Plug the controller into the closet mains socket and press
to turn on the appliance.
3. Repeatedly press on the controller to select the desired
heat level.
4. When the overblanket is not in use, switch off the controller
and then remove the plug from the mains socket.
• It is recommended to set the heat level to medium or high
level for 1 to 2 hours before sleeping on the bed and then
you can set the heat level to the low level or turn off the
appliance.
• The display will show 1, indicang the heat seng is 1.
• Heat sengs:
The number shown on the display
1-2
Heat level
Low heat
Medium heat
High heat
3-4
5-6
Switch off and remove the controller from the overblanket
before cleaning.
The power cable must NEVER come into contact with water.
It is recommended to wash the overblanket only if it becomes
dirty or dusty.
Before using the overblanket, make sure it is completely dry.
Machine washing
The overblanket may be washed on the Delicate Wash seng of
washing machine at a maximum temperature of 30°C.
Drying
Hang the overblanket to air dry naturally in a horizontal posion
unl completely dry.
Do not expose to direct sunlight.
Do not dry with a hair dryer or heater.
Maintenance
Examine the overblanket regularly to check that there are no
signs of wear or damage. If any damage/wear is spoed, do not
use the overblanket and seek specialist advice. If the mains lead
or controller is damaged, do not open or aempt to repair them
as they must be serviced by a qualified person.
Storage
When not in use, allow to cool and dry then fold neatly but not
ghtly (or roll) in the original packaging without sharp bends in
the heang element.
Store where no other objects will be placed upon it in a cool dry
place.
• Safety Timer: The appliance has a built-in mer and will
automacally switch off aer 3 hours. The auto-off indicator
light will illuminate.
• To switch back on the appliance, first press and then
repeatedly press on the controller to select the desired
heat level.
Preheang the bed
DO NOT SLEEP WITH THE OVERBLANKET ON THE PREHEAT SETTING.
Locking catch
Downloaded from www.vandenborre.be
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Okoia OB200 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info