424157
65
Zoom out
Zoom in
Vorherige Seite
1/127
Nächste Seite
55
TRANSMISSION
c) Press SPEED DIAL.
Enter the speed dialling code under which the
correspondent’s facsimile number has been
stored. Otherwise press
or until the
relevant correspondent’s facsimile number
appears on the display and then press START
to confirm your selection.
The number and name associated with the
code appear on the display for a few seconds.
If, when you set a speed dialling code, the
message “NOT ENABLED” appears on the
display for a few seconds, this means that no
number has been stored under that code. If this
is the case, refer to the “Programming speed
dialling codes - normal and extended” section of
the “PROGRAMMING” chapter and program
the code.
2. The facsimile machine starts to send the document.
If transmission was completed successfully, the
facsimile machine beeps and returns to stand-by
mode.
If the correspondent does not answer or the line is
busy, the facsimile machine, after a few seconds,
automatically retries transmission (automatic redial
feature). The message "REDIAL" appears on the
display.
If the document is removed, redialling is aborted.
If transmission still proves unsuccessful, after the last
retry, you can try to retransmit the document, providing
the document has not been removed. If the
correspondent’s name was entered on the numeric
keypad, you can retransmit by pressing REDIAL.
If you hear a beep and the error LED comes on, this
means that an error has occurred (e.g. an interruption
in the connection). If this is the case, press STOP to
switch the LED off and repeat the transmission proce-
dure.
If the “LAST TX REPORT” parameter was enabled in
the operating configuration, the facsimile machine
with print the report at the end of transmission.
0 1 2 5 4 5 8 1 2
L A N D R E S . p . A .
P R E S S o r N O .
cap09.p65 13/04/00, 22.3055
65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Olivetti ofx 2100 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info