569191
7
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
7
B
. Starting up
B
.2 Unpacking and assembling
Connection to power supply:
-
Check that the data on the data plate coincides with the local vol-
tage before connection calculator to power supply.
- Connect calculator to power supply.
Inserting the paper roll (Art. No. 06.840.0200):
-
Fit the paper roll holder
- Roll out paper, leading edge to the bottom, into the guides
- Turn calculator on
-
Paper is drawn into paper slot
- Feed paper as far as possible until it stops at the rear opening
- Use to insert the paper further
Turning ON / OFF:
When turned on, the calculator is ready to operate.
A
t least 3 seconds should elapse between turning on and off
again.
B.3 General information
A
ccumulator:
Products, quotients and individual value can be totaled and stored
in the accumulator. Multiplication and division are ignored.
Entries:
Value and sub-totals are transmitted directly to the accumulator via
the addition and subtraction keys.
Constants:
The multiplicand, divisor, basic value or percentage, including the
subsequent function, are automatically retained as constants.
Repeat value:
Using the basic calculation modes, a value can be repeatedly
used as often as required.
Paper roll printout:
The decimal place is printed as a point. Examples:
Entering values and calculation methods:
- Addition / Subtraction (a+b+c+)
Result via
- Multiplication / Division (axbȖc=)
Result via
Triad group symbols (commas) shown in display:
Values to the left of the decimal point are divided by triad symbols.
Example:
Capacity overflow:
When results exceed 12 full digits ………………..”
is printed out, an “E” appears in the display and the keyboard is
blocked for entry. To release the keyboard;
press: or .
Memory block:
The memory will not accept a value which would exceed the me-
mory capacity. The memory contents remain unaltered.
Item counter (Switch position):
When activated a 3 digit item counter is provided for the accumu-
lator and for the memory.
By pressing and or and the number of additions
and subtractions are counted.
The number of item is printed on requesting sub-totals or final total.
a Example: 008 = 8 items.
Pressing the final total key clears the counter.
Stored rates retained:
The stored rates of conversion, tax and % will be retained even if
the calculator is turned off.
The 11 pre-programmed fixed Euro rates are available for different
countries (refer “Currency code table” page 29.) and are originally
installed in the calculator.
C
urrency conversion:
- The conversion rate consists of 6 significant figures with the deci-
mal points.
-
Additionally, 5-currency conversion rates can be programmable
and stored.
- To convert between ʻ1 st currencyʻ and ʻ2 nd currencyʻ through
c
onversion rate, the 1st currency and the 2nd currency will be se-
lect among ʻ Euroʼ , ʻo riginally installed 11-currencyʼ and ʻsto red 5-
currencyʼ.
-
Conversion rate is printed out with the symbol of C5 .
- Euro currency can be printed out with the symbol 5 .
-
Refer to “Currency code table” page 29.
Tax Rate:
-
Tax rate consists of 6 significant figures with decimal point.
- Tax rate is printed out with the symbol of %.
A
utomatic %+ calculation (percent add-on):
- Automatic %+ calculation can proceed with user stored % rate or
entry % rate.
-
The user stored % rate consists of 6 significant figures with deci-
mal point.
- Stored % rate is printed out with the symbol of %.
B
.4 Keyboard summary
The keyboard has an input buffer which enables all entries, re-
g
ardless of speed of input, to be proceeded in order of input.
Total clearance
- The complete calculation process is cleared. Memory con-
tents are retained.
- The stored rates are retained even after depressing this
key.
Recall item counter
- Press once:
Recall number of added items
- Press twice, after recall of final sum or sub-total:
Recall arithmetic mode average of item addition and sub-
traction.
Non-add key
- Date or number printout.
Correction key
- Clear entered value.
Algebraic sign change key
- To specify a positive or negative value.
Digit keys
- The values entered appear in the display.
Decimal point key
Subtraction key
Addition key
Sub-total key
- Recall accumulator / item counter contents
Final total key
- Recall and clear accumulator / item counter contents
Percent key
Together with :
- Recall percent value.
Together with and or :
- Recall the value plus or minus the percent value.
Division key
Multiplication key
Result key for multiplications and divisions
- Conclude calculation.
Result is requested.
The result can be further used with the (+, -, x, Ȗ) command
or transferred to the memory with and .
008 . . . . . . ... . . . . . . . . .
600.00
M+ M–
=
x
Ȗ
X
+
X
%
t
+
.
+/-
CE
#
Ȇ
1
,
234
,
567
,
890
.
12
+
1,234,567,890.12
CE C
+ M+ M–
C
n
=
t
9
0
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

olympia-cpd-3212-s

Suche zurücksetzen

  • Olympia CPD 3212 S zeigt E = kapazitätsüberschreitung an und läßt sich nicht bedienen. Eingereicht am 12-12-2022 14:24

    Antworten Frage melden
  • Rechenmaschine zeigt ständig Kapazitätsüberschreitung an
    Eingereicht am 5-1-2022 09:57

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Olympia CPD 3212 S wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info