569260
2
Zoom out
Zoom in
Vorherige Seite
1/3
Nächste Seite
Important safety rules
Please read the instructions thoroughly before using the device to make sure that you
are able to use all of its functions.
Keep children and pets away from the device. The device may only be used by adults.
The device can only be used by one person at a time. Do not conduct any other activi-
ties on the device (e.g. cleaning) when it is in use.
Have any necessary repairs performed by qualified specialist personnel.
Protect the device against direct sunshine, extreme heat and moisture.
The following warning sign is attached to the bottom of the device.
Achtung
Gefahr eines elektrischen Schlages!
Gerät nicht öffnen!
Keinerlei vom Benutzer austauschbare Teile inseitig.
Gerät nur von geschultem Fachpersonal öffnen lassen.
Failure to observe this warning sign can lead to injuries.
Safety symbols
Do not reach into the infeed slot.
Do not insert paper clips or
staples into the infeed slot.
Keep ties, scarves, loose cloth-
ing and long necklaces or
bracelets out of the area around
the infeed slot.
Keep long hair out of the area
around the infeed slot.
Caution: failure to observe these safety symbols can lead to serious injuries.
If an object (sleeve, tie, etc.) is inadvertently fed into the infeed slot, pull out the
mains plug immediately.
Electrical safety guidelines
- Pull out the mains plug before emptying the paper collecting basket, cleaning the
device or if the device is not going to be used for a long time.
- If the mains cable, mains plug or the device itself is damaged do not operate the
device any longer (danger of injuries).
- Do not overload the recommended capacity of the mains socket.
- Do not make any alterations to the mains cable as it has been designed for the spe-
cified mains voltage.
Operating elements
The sliding switch (OFF / ON/AUTO / REVERSE) on the device has the following
functions.
OFF position: the device is switched off.
ON/AUTO position: the device is ready for operation.
REV position: the cutting unit runs in reverse. To hold the rest of the paper back, you
can push the sliding switch in the REV position. The cutting unit runs backwards and
pushes the paper back.
The device also has a microswitch:
shredding starts as soon as paper in inserted in the infeed slot.
Materials suitable for destruction
Only use the PS-35CC paper shredder to shred paper. The paper must be dry and
must correspond to the specifications listed in the technical data. Shredding other
materials can lead to injuries (for example, if solid material splinters) or damage to the
device (destruction of the cutting unit, etc.).
Do not shred endless paper documents with this device. Remove all paper clips and
staples before feeding paper into the device.
Starting up
- Take the device carefully out of the packaging and place it on the paper collection
basket. The bulge in the paper collection basket must point to the front. The device
can only be operated when it has been put properly in place (contact switch).
- Plug the mains cable into the socket. Please observe the energy supply specificati-
ons on the back of the device in your safety measures.
- The socket and the mains connection of the device must be freely accessible for
safety reasons so that the power supply can be disconnected in emergencies.
Paper supply
- Switch the device on with the sliding switch (ON/AUTO position).
- Feed the paper to the cutting unit through the infeed slot.
- The device runs forwards and draws the paper in.
- The device switches off automatically after the shredding cycle. The motor carries on
running for another 2-3 seconds to remove the remaining paper from the cutting unit.
Caution:
the sheet capacity given in the technical data may not be exceeded as oth-
erwise a paper jam will occur. Remember that the thickness of the paper increases
when it is folded and the recommended sheet capacity may be exceeded in this way.
Reduce the quantity of paper fed if it is coarse fibre paper.
it is recommended not to fill the paper collection basket up to the cutting unit. This
prevents cut material becoming jammed in the cutting unit.
Empty the paper collection basket at regular intervals.
Caution
Danger of electric shocks!
Do not open the device.
Device contains no user-serviceable parts.
Device should only be opened by trained
specialist personnel.
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

olympia-ps-35cc

Suche zurücksetzen

  • Hallo , ich habe einen Olympia PS 35CC
    Cross Cut Paper Shredder . Er zieht kein Papier mehr ein läuft nur noch rückwärts .

    Eingereicht am 23-2-2021 16:12

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Olympia PS-35CC wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Olympia PS-35CC

Olympia PS-35CC Bedienungsanleitung - Deutsch - 3 seiten

Olympia PS-35CC Bedienungsanleitung - Holländisch - 3 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info