777002
19
Zoom out
Zoom in
Vorherige Seite
1/25
Nächste Seite
59
E
Taking Pictures with Digital Cameras
without
Communication Capabilities
The regular AUTO and MANUAL flash modes can be used with digital
cameras which are
not
capable of data communications.
Taking Pictures in the Regular AUTO
Flash Mode
Exposure can be set automatically by inputting the sensitivity of CCD (digital
camera) and lens F-No. yourself, even if the camera does not have
communication capabilities.
It is possible to mount the flash direct on a camera with a hot shoe. When
mounting the flash on a camera without a hot shoe but with a sync terminal, a
conversion grip is necessary to send the light emission signal from the sync
terminal to the flash.
For the information on how to attach the flash on the conversion grip or the
camera, read page 51.
(It is not possible to mount the flash on the camera which has neither a hot
shoe nor a sync terminal.)
1Press the flash's MODE button until "AUTO" appears on the flash's
control panel.
2Set the sensitivity of the digital cameras CCD from the GNo/ISO up/
down buttons.
3Set the lens F-No. from the FNo up/down buttons.
4
Check that the CHARGED lamp is lit.
If the CHARGED lamp is out, the flash is not yet fully charged for firing.
5Press the shutter release button down all the way.
6
Check that the AUTO CHECK lamp blinks.
You can check whether the flash fired correctly or not after the picture is
taken. If the AUTO CHECK lamp blinks for 5 seconds after the shutter
release button has been pressed down all the way, the flash fired
correctly.
MEMO
Exposure can be compensated in 1/4 EV steps using the GNo/ISO up/down buttons.
You can test whether illumination is sufficient or not before taking your picture, by
pressing the TEST button. If the required light is emitted, the AUTO CHECK lamp will
blink.
When connecting the flash to a digital camera without communication capabilities, the
power save function does not work. To prevent batteries from exhausting, turn the power
off after taking pictures.
〜
1
4
3
6
2
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Olympus FL-40 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info