Bedienungsanleitung Omron M7 Intelli IT (HEM-7361T-EBK) model 2020 (Seite 3 von 100) (Holländisch)

737895

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

EN2

• Consult with your physician before using this monitor if you have severe

blood flow problems or blood disorders as cuff inflation can cause bruising.

• DO NOT take measurements more often than necessary because bruising,

due to blood flow interference, may occur.

• ONLY inflate the arm cuff when it is applied on your upper arm.

• Remove the arm cuff if it does not start deflating during a measurement.

• DO NOT use this monitor for any purpose other than measuring blood pressure

and/or detecting the possibility of Afib.

• During measurement, make sure that no mobile device or any other

electrical device that emit electromagnetic fields is within 30 cm of this

monitor. This may result in incorrect operation of the monitor and/or cause

an inaccurate reading.

• DO NOT disassemble or attempt to repair this monitor or other components.

This may cause an inaccurate reading.

• DO NOT use in a location where there is moisture or a risk of water splashing

this monitor. This may damage this monitor.

• DO NOT use this monitor in a moving vehicle such as in a car or on an aircraft.

• DO NOT drop or subject this monitor to strong shocks or vibrations.

• DO NOT use this monitor in places with high or low humidity or high or low

temperatures. Refer to section 6.

• During measurement, observe the arm to ensure that the monitor is not

causing prolonged impairment to blood circulation.

• DO NOT use this monitor in high-use environments such as medical clinics or

physician offices.

• DO NOT use this monitor with other medical electrical (ME) equipment

simultaneously. This may result in incorrect operation of the monitor and/or

cause an inaccurate reading.

• Avoid bathing, drinking alcohol or caffeine, smoking, exercising and eating

for at least 30 minutes before taking a measurement.

• Rest for at least 5 minutes before taking a measurement.

• Remove tight-fitting, thick clothing and any accessories from your arm while

taking a measurement.

• Remain still and DO NOT talk while taking a measurement.

• ONLY use the arm cuff on persons whose arm circumference is within the

specified range of the cuff.

• Ensure that this monitor has acclimated to room temperature before taking

a measurement. Taking a measurement after an extreme temperature

change could lead to an inaccurate reading. OMRON recommends waiting

for approximately 2 hours for the monitor to warm up or cool down when

the monitor is used in an environment within the temperature specified

as operating conditions after it is stored either at the maximum or at the

minimum storage temperature. For additional information on operating and

storage / transport temperature, refer to section 6.

• DO NOT use this monitor after the durable period has ended. Refer to section 6.

• DO NOT crease the arm cuff or the air tube excessively.

• DO NOT fold or kink the air tube while taking a measurement. This may cause

an injury by interrupting blood flow.

• To unplug the air plug, pull on the plastic air plug at the base of the tube, not

the tube itself.

• ONLY use the AC adapter, arm cuff, batteries and accessories specified for

this monitor. Use of unsupported AC adapters, arm cuffs and batteries may

damage and/or may be hazardous to this monitor.

• ONLY use the approved arm cuff for this monitor. Use of other arm cuffs may

result in incorrect readings.

• Inflating to a higher pressure than necessary may result in bruising of the arm

where the cuff is applied. NOTE: refer to “If your systolic pressure is more than

210mmHg” in section 13 of instruction manual

for additional information.

• Read and follow the “Correct Disposal of This Product” in section 7 when

disposing of the device and any used accessories or optional parts.

Data Transmission

• DO NOT replace batteries or unplug the AC adapter while your readings are

being transferred to your smart device. This may result in incorrect operation

of this monitor and failure to transfer your blood pressure data.

AC Adapter (optional accessory) Handling and Usage

• Fully insert the AC adapter into the outlet.

• When unplugging the AC adapter from the outlet, be sure to safely pull from

the AC adapter. DO NOT pull from the AC adapter cable.

• When handling the AC adapter cable:

Do not damage it. / Do not break it. / Do not tamper with it. / DO NOT pinch

it. / Do not forcibly bend or pull it. / Do not twist it. / DO NOT use it if it is

gathered in a bundle. / DO NOT place it under heavy objects.

• Wipe any dust off of the AC adapter.

• Unplug the AC adapter when not in use.

• Unplug the AC adapter before cleaning this monitor.

Battery Handling and Usage

• DO NOT insert batteries with their polarities incorrectly aligned.

• ONLY use 4 “AA” alkaline or manganese batteries with this monitor. DO NOT

use other types of batteries. DO NOT use new and used batteries together.

DO NOT use different brands of batteries together.

• Remove batteries if this monitor will not be used for a long period of time.

• If battery fluid should get in your eyes, immediately rinse with plenty of clean

water. Consult with your physician immediately.

Omron M7 Intelli IT (HEM-7361T-EBK) model 2020 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info