Bedienungsanleitung One for All KAMELEON 3 II (Seite 2 von 40) (Englisch)

598351

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

2 WWW.ONEFORALL.COM

About Your KAMELEON 3

Easy to use unique “EL” display

By choosing the ONE FOR ALL KAMELEON 3 universal remote control you have

opted for easy use. Your KAMELEON 3 features a unique, user-friendly backlit

display, which ensures you have easy access to all the keys you need, whilst

hiding those you don’t. Made of the strictest quality, it will provide long-term

satisfaction. After replacing batteries, you will need to first press any key before

the screen will light up. From then on, the display will automatically illuminate

whenever the remote is picked up (touching screen and remote simultaneously).

It is also possible to change the activation-mode into activation by key press. To

set the ”EL” display to activation by key press, see page 3, section: ”EL” screen

activation setting. Also, this product comes with a build-in light sensor which

will increase the brightness in a bright environment and decrease the brightness

in a dark environment.

Controls up to 3 devices

Your KAMELEON 3 is designed to let you use one remote to operate three

devices (a television, video recorder, DVD player) designed to be operated by an

infrared signal. Your KAMELEON 3 comes with 2 IR (infra-red) wide range

transmitters for maximum range and is High Frequency capable up to 450 kHz.

Learning feature

The KAMELEON 3 comes equipped with the unique “learning feature”, which

means that you can copy almost any function (max. ± 30) from your original

(working) remote control onto your new KAMELEON 3 (See “Learning Feature”

on page 12). This may come in handy, when after having setup your KAMELEON

3 you find that some functions from your original remote are missing on your

KAMELEON 3 key pad.

Macros (sequence of commands)

Your KAMELEON 3 comes with an easy-to-use Macro feature, allowing you to

send several commands with the press of a single key (for example turning a few

devices on or off). Once you programmed a macro on a key, the sequence will

be performed in every mode.

Your KAMELEON 3 comes with 2 AA/LR6 alkaline batteries.

1. Push the battery door upwards and lift it up to remove it.

2. Match the batteries to the (+) and (–) marks inside the battery case, then

insert the batteries.

3. Replace the battery cover by pushing downwards and allowing it to click

back into position.

- After re-installing the batteries, the entire ”EL” display will be lit for a

duration of 6 seconds upon the first key press after which it will default to

the TV mode.

Low Voltage Indicator

As soon as the batteries run out of power the KAMELEON 3 will indicate this.

The IR indicator will flash 5 times whenever you press a key.

Please make sure to replace the batteries with 2 new AA/LR6 alkaline batteries.

Batteries

Kameleon_3_nieuw_2004_11x20 Eur 23-08-2004 12:59 Pagina 2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

One for All KAMELEON 3 II Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von One for All KAMELEON 3 II

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info