Bedienungsanleitung One for All URC 4063 Easy 4 (Seite 4 von 4) (Englisch)

492761

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

SETUP

FAV CH

9-9-6

SETUP

Using the Favorite Channel Key

Your

One For All

Easy 4

is equipped with a

favorite channel key (FAV CH). You can set up the

FAV CH key with a list of up to 10 of your favorite

channels for either your TV, VCR, Cable Box,

Satellite or DSS. Please note, the FAV CH key can

only be set up for one device key (TV, VCR/LD or

CBL/SAT) at a time. You cannot set up a favorite

channel list for another device key until you have

cleared the FAV CH key of your original list.

1 Press the device key (TV, VCR/LD, or CBL/

SAT) for the home entertainment

component that will contain your

favorite channel list.

2 Press and hold SETUP until

One For All

Easy 4’s

red light blinks twice. Release

SETUP and press 9-9-6.

3 Enter the channel number of the first

channel you would like to add to your

favorite channel list. Then press SETUP.

• If you are entering a single digit

channel number, you must press

0 first.

• If you are entering a channel that

is three digits long, such as 103,

you do not have to press SETUP

after you have entered the

channel number.

• If your original remote control

required you to use an ENTER key to

change channels, press ENTER

instead of SETUP after entering your

channel number. For example, if you

want to add TV channel “4” to your

favorite channel list, you would: Press

TV, then press and hold SETUP until

the

One For All

Easy 4’s

red light

blinks twice, then release SETUP and

press 9-9-6. Press 0-4, followed by

ENTER. Then, add your second

channel, followed by ENTER, and

continue adding your favorite

channels until you have added the

10 channels you desire in your

favorite channel list.

4 Continue adding your favorite

channels, up to 10 channels. Once you

have finished, press and hold SETUP until

the

One For All

Easy 4’s

red light blinks

twice.

5 To scan through your favorite channel

list, press FAV CH. Your

One For All

Easy

will automatically scan through your

favorite channel list, stopping at each

channel for three seconds.

6 To stop at one of your favorite channels,

press any key on the

One For All

Easy

To clear an entire favorite channel list from the

FAV CH key:

1 Press and hold SETUP until the

One For

All

Easy 4’s

red light blinks twice, then

release SETUP.

2 Press 9-9-6, then press and hold SETUP

until the

One For All

Easy 4’s

red light

blinks twice.

VCR/LD

CBL/SAT

SETUP

9-9-6

One For All

PRODUCTS

Limited Warranty

One For All(“OFA”) warrants, to the original purchaser only, that

this product will be free from defects in materials and workmanship,

under normal use, for ninety (90) days from the date of original

purchase.

This warranty does not cover damage or failures caused by

products or services not supplied by OFA, or which result from

accident, misuse, abuse, neglect, mishandling, misapplication,

faulty installation, set-up adjustment, improper maintenance,

alteration, maladjustment of consumer controls, modifications,

commercial use, or that is attributable to acts of God.

There are no express warranties except as listed above. OFA SHALL

NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES

RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF

ANY BREACH OF WARRANTY. ALL EXPRESS AND IMPLIED

WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE

WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow

the exclusion or limitation of incidental or consequential damages,

or limitations on how long an implied warranty lasts, so the above

exclusions or limitations may not apply to you. This warranty gives

you specific legal rights and you may also have other rights which

vary from state to state.

To obtain warranty service for a defective product during the

warranty period, please return the product, preferably in the original

carton, along with your purchase receipt, to the store of original

purchase. A note detailing the complaint would be helpful. The

store, at its option, will replace or repair this product if found to be

defective.

One For All

(330)-405-8584

One For All

is a trademark of Universal Electronics Inc.

publication may be reproduced, transmitted, transcribed,

stored in any retrieval system, or translated to any language, in

any form or by any means, electronic, mechanical, magnetic,

optical, manual, or otherwise, without the prior written

permission of Universal Electronics Inc.

This One For All

product is designed for compatibility in North

America excluding Mexico.

URC-4063 - One For All

Big Easy Select Easy 4.

M4022

5/98

Replace the batteries with four (4)

new AAA alkaline batteries.

Make sure you are aiming your

One For All

Easy 4

at your home

entertainment component and

that you are within 15 feet of the

component you are trying to

operate before using your

remote.

Try all the codes listed for your

home entertainment component

in the "Set-Up Codes" section.

Many set-up codes may allow for

partial functionality, however, only

one set-up code will operate your

home entertainment component

properly. Make sure that all of the

components you are setting up

are able to be operated with an

infrared remote control.

Use the VCR set-up codes for your

brand. Some combo units may

require both a TV code to control

volume and a VCR code for full

operation.

As a safety feature on the

One

For All

Easy 4

, you must press the

REC key twice.

Press and hold SETUP until the

One

For All

Easy 4's

red light blinks

twice. Release SETUP and enter

9-9-3 followed by VOL +.

Due to RCA design (1983-1987),

only the original remote control

will operate these functions.

However, using the FAV CH key will

allow you to run through a list of

up to 10 of your favorite channels.

If your original remote control

required a ENTER keystroke when

changing channels, press the

ENTER key on the

One For All

Easy 4

after you enter the

channel number.

Press and hold SETUP until the

One For All

Easy 4's r

ed light

blinks twice. Release SETUP and

enter 9-6-9.

Troubleshooting

Problem Solution

Red light not blinking

when you press a key?

The red light blinks

when you press a key

but you receive no

response from your

home entertainment

component ?

The

One For All

Easy

does not operate

your home

entertainment

component or is not

performing

commands properly?

Problems program-

ming a TV/VCR

combo?

VCR not recording?

No volume when in

the Cable mode or

when operating a

second TV or TV/VCR

combination?

Channel +/- and

RECALL not working for

your RCA TV?

Problems changing

channels?

Keypad scrambled?

World Wide Web: http://www.oneforall.com

One for All URC 4063 Easy 4 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info