Zoom out
Zoom in
Vorherige Seite
1/19
Nächste Seite
URC 4080/4081
VIDEO EXPERT
User’s Guide
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    URC 4080/4081
    VIDEO EXPERT

    User’s Guide



  • Page 2

    TABLE OF CONTENTS

    INTRODUCTION

    Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
    Features And Functions . . . . . . . . . . . . . . . . . . . . . . 4

    The One For All® 4-Device Video Expert remote control
    is our latest-generation universal remote control,
    designed specifically for controlling video components.

    Key Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

    Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . 7
    Programming TV Control . . . . . . . . . . . . . . . . . . . . . 8
    Setup Codes for TVs . . . . . . . . . . . . . . . . . . . . . . . . 8

    Programming VCR Control . . . . . . . . . . . . . . . . . . 12
    Setup Codes for VCRs. . . . . . . . . . . . . . . . . . . . . . 12

    Programming TV/VCR Combo Control . . . . . . . . 16
    Setup Codes for TV/VCRs . . . . . . . . . . . . . . . . . . . 17

    Programming Cable Converter or
    Satellite Receiver Control . . . . . . . . . . . . . . . . . . . 18
    Setup Codes for Cable Converters. . . . . . . . . . . . . 18
    Setup Codes for Satellite Receivers. . . . . . . . . . . . 20

    Programming DVD Player Control . . . . . . . . . . . . 21

    Its sophisticated technology will allow you to finally
    consolidate the clutter of the original remote controls in
    your home entertainment system. Moreover, it’s packed
    with easy-to-use features such as:
    • Preprogrammed technology for easy setup of video
    components in your home entertainment system
    • Preprogrammable Master Power key for master on/off
    control of all of your equipment with a single keystroke
    • A unique Video Configuration key that allow you to
    access home theater keys from various modes without
    changing device modes
    • Keymover for mapping (copying) keys from one mode
    to another

    Setup Codes for DVD Players. . . . . . . . . . . . . . . . . 22
    Setup Codes for LD Players . . . . . . . . . . . . . . . . . . 22

    • Menu function to navigate and choose on-screen menu
    items for a selected component

    Searching For Your Code . . . . . . . . . . . . . . . . . . . . 23
    Checking The Codes . . . . . . . . . . . . . . . . . . . . . . . 24
    Programming The Power Key . . . . . . . . . . . . . . . . 25
    Re-Assigning Device Keys . . . . . . . . . . . . . . . . . . 26
    Changing Volume Lock . . . . . . . . . . . . . . . . . . . . . 27

    • User-programmed macro keys to perform repetitive,
    time-consuming operations for easy, convenient access
    through the press of a single key

    To Change Volume Lock to the CBL/SAT Mode . . . . 27
    To Change Volume Lock to the VCR Mode . . . . . . . 27
    To Change Volume Lock to the DVD Mode . . . . . . . 27
    To Change Volume Lock Back to the TV Mode . . . . 28
    To Unlock Volume Lock . . . . . . . . . . . . . . . . . . . . . 28

    Using The Menu Key . . . . . . . . . . . . . . . . . . . . . . . 28
    Using Keymover . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
    Using Macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

    • Color-coded keys to quickly locate popular functions
    • Code library for video components
    • Code Search to help program control of older or
    discontinued components
    Before using your new remote control, you will need to
    program it to operate the specific home entertainment
    components you wish to control. Please follow the
    instructions detailed in this manual and then enjoy your
    new One For All 4-Device Video Expert remote control.

    Programming a Favorite Channel . . . . . . . . . . . . . 30
    Programming a Secondary Master Power Key . . . . 31
    Clearing a Macro . . . . . . . . . . . . . . . . . . . . . . . . . 31

    Using The Video Configuration Mode . . . . . . . . . 32
    An Example Video Configuration . . . . . . . . . . . . . . 33

    Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
    Additional Information . . . . . . . . . . . . . . . . . . . . . . 36
    2

    3



  • Page 3

    FEATURES AND FUNCTIONS
    Use the illustration below to locate One For All 4-Device
    Video Expert remote control features and then study the Key
    Charts (on the next two pages) to learn how they function.

    Key Charts
    Use SET for all programming
    sequences.
    The LED (red light) blinks to show that
    the remote control is working and is
    sending signals.
    Use M.POWER to set up and turn on (or
    off) all your video components with a
    single key.Also see page 25.
    Press POWER once to turn on (or off)
    a selected home entertainment
    component.
    Press TV, DVD, VCR, or CBL/SAT once
    to select a home entertainment video
    component to control.
    Use the F1, F2, F3, or F4 keys
    to program macros.Also see page 30.
    Use EXIT to exit out of your cable
    converter’s menu and guide.
    Press MENU once to display the selected
    component’s screen menu. Use the VOL
    +/- and CH +/- keys to navigate menus
    and press the MUTE key to select items.
    Press TV/VID to switch viewing between
    TV and video sources.
    Use VOL + (or VOL -) to raise (or lower)
    the sound volume.
    Use CH + (or CH -) to select the next
    higher (or lower) channel.
    Press MUTE/SELECT once to turn sound
    off or on.Also, use MUTE/SELECT to
    select items from the selected
    component’s screen menu after
    pressing MENU once.
    After pressing MENU, use the Cursor
    Keys to move the cursor in the program
    guide and menu screens.

    continued on next page...

    4

    5



  • Page 4

    FEATURES AND FUNCTIONS

    INSTALLING BATTERIES

    Key Charts (Continued)
    Press PIP once to view or turn off the
    picture-in-picture feature.
    Press SWAP once to exchange the PIP
    with the main TV picture.



    Use MOVE to the picture-in-picture
    position on the TV screen.
    Press SLEEP once to enable (or disable)
    a selected component’s sleep timer
    (if available).
    Use DISPLAY to view a selected
    component’s information on the TV.
    Use the keypad (0 ~ 9) to directly select
    channels (e.g., 09 or 31).



    Press ENTER once after entering
    channel numbers on some TV
    models.
    Press PREV.CH once to recall the
    last-viewed channel.
    Use V.CONFIG to custom program and
    recall video configuration modes for
    home theater use.Also see page 32.
    In the TV, DVD, or VCR mode, use the
    FWD SCAN, REW SCAN, PLAY, STOP, and
    PAUSE keys to control your VCR or DVD
    (or LD) player. To record a program on,
    the VCR, press REC twice.


    1.

    On the back of the remote control, press the
    recess and slide the battery cover off (see above).

    2.

    Obtain two (2) fully-charged AA alkaline
    batteries. Match the + and – marks on the
    batteries to the + and – marks in the battery
    case, then insert the new batteries.

    3.

    Align the cover keys with the case openings
    and slide the cover on until it locks.

    4.

    Test the unit by pressing POWER and any mode
    key (e.g. TV, DVD, VCR, or CBL/SAT). If batteries
    are inserted correctly, the LED will blink once.

    NOTE: When batteries need replacement, the One For All
    4-Device Video Expert remote control will cease to operate. Simply
    replace the batteries and the unit will be restored to its full functionality, complete with your favorite settings.

    6

    7



  • Page 5

    PROGRAMMING TV CONTROL
    NOTE: If you own a TV/VCR combination, skip this section and
    perform “Programming TV/VCR Combo Control” on page 16.

    Locate the brand name of your TV in the Setup Codes For
    TVs section below, and write it in the following space.
    TV Brand: __________________________________
    The brands are listed in alphabetical order with the most
    popular codes listed first. To program TV control:
    1.

    Turn on the TV.

    2.

    On the remote control, press TV once. Press and
    hold SET until the LED blinks twice, then
    release SET.
    NOTE: The remote control will exit programming if
    more than 10 seconds elapse between key presses.

    3.

    Enter the first four-digit code for your TV. If
    you perform this procedure correctly, the LED
    will blink twice.
    NOTE: If the LED emits a long blink, the code is
    invalid. Repeat steps 2 through 3 and try entering the
    same code again.

    4.

    5.

    Aim the remote control at your TV and press
    POWER once. The TV should turn off. If it does
    not respond, repeat steps 2-3, trying each code
    for your brand until you find one that works. If
    it still does not work, try searching for the code
    (see Searching For Your Code on page 23).
    Write your TV code in the boxes below for
    future reference.

    NOTE: Remember, to use the One For All 4-Device Video Expert
    remote control to operate your TV, press TV first.

    Setup Codes for TVs:
    AOC
    Admiral
    Aiko
    Akai
    Alaron
    Ambassador
    America Action

    0030, 0019, 0052
    0093, 0463
    0092
    0030
    0179
    0177
    0180

    8

    Ampro
    Anam
    Audiovox
    Baysonic
    Belcor
    Bell & Howell
    Bradford
    Brockwood
    Broksonic
    CXC
    Candle
    Carnivale
    Carver
    Celebrity
    Cineral
    Citizen
    Concerto
    Contec
    Craig
    Crosley
    Crown
    Curtis Mathes
    Daewoo
    Daytron
    Denon
    Dumont
    Dwin
    Electroband
    Emerson
    Envision
    Fisher
    Fujitsu
    Funai
    Futuretech
    GE
    Gibralter
    GoldStar
    Gradiente
    Grunpy
    Hallmark
    Harley Davidson
    Harman/Kardon
    Harvard
    Hitachi
    Infinity
    Inteq
    JBL
    JCB
    JVC

    0751
    0180
    0451, 0180, 0092, 0623
    0180
    0019
    0154
    0180
    0019
    0236, 0463
    0180
    0030, 0056
    0030
    0054
    0000
    0451, 0092
    0060, 0030, 0056, 0039, 0092
    0056
    0180
    0180
    0054
    0180, 0039
    0047, 0054, 0154, 0051, 0451, 0093, 0060, 0030, 0145, 0056,
    0039, 0166, 0466, 1147, 1347
    0451, 0019, 0039, 0092, 0623, 0624
    0019
    0145
    0017, 0019
    0720, 0774
    0000
    0154, 0236, 0463, 0180, 0178, 0019, 0179, 0039, 0177, 0623,
    0624
    0030
    0154
    0179, 0683
    0180, 0179, 0171
    0180
    0047, 0051, 0451, 0093, 0178, 0135, 1147, 1347
    0017, 0030, 0019
    0030, 0178, 0019, 0056
    0053, 0056
    0180, 0179
    0178
    0179
    0054
    0180
    0145, 0056, 0151
    0054
    0017
    0054
    0000
    0053
    continued on next page...

    9



  • Page 6

    PROGRAMMING TV CONTROL
    Setup Codes for TVs (Continued):
    KEC
    KTV
    Kaypani
    Kenwood
    LG
    LXI
    Luxman
    MGA
    MTC
    Magnavox
    Marantz
    Matsushita
    Megatron
    Memorex
    Midland
    Mitsubishi
    Motorola
    Multitech
    NAD
    NEC
    NTC
    Nikko
    Onwa
    Optimus
    Optonica
    Orion
    Panasonic
    Penney
    Philco
    Philips
    Pilot
    Pioneer
    Portland
    Prism
    Proscan
    Proton
    Pulsar
    Quasar
    RCA
    Radio Shack
    Realistic
    Runco
    SSS
    Sampo
    Samsung
    Samsux

    0180
    0180, 0030, 0039
    0052
    0030, 0019
    0056
    0047, 0054, 0154, 0156, 0178
    0056
    0150, 0030, 0178, 0019
    0060, 0030, 0019, 0056
    0054, 0030, 0179, 1254
    0054, 0030
    0250
    0178, 0145
    0154, 0250, 0463, 0150, 0178, 0056
    0047, 0017, 0051, 0039, 0135
    0093, 0150, 0178, 0019
    0093
    0180
    0156, 0178, 0166
    0030, 0019, 0056
    0092
    0030, 0178, 0092
    0180
    0154, 0250, 0166
    0093, 0165
    0236, 0463, 0179
    0051, 0250
    0047, 0156, 0051, 0060, 0030, 0178, 0019, 0056, 0039, 0135,
    1347
    0054, 0463, 0030, 0145, 0019
    0054
    0030, 0019, 0039
    0166
    0019, 0039, 0092
    0051
    0047
    0178, 0031, 0052, 0466
    0017, 0019
    0051, 0250, 0165
    0047, 0051, 0093, 0019, 0090, 0135, 1047, 1147, 1247, 1347,
    1447
    0047, 0154, 0165, 0180, 0030, 0178, 0019, 0056,0039
    0154, 0165, 0180, 0030, 0178, 0019, 0056, 0039
    0017, 0030
    0180, 0019
    0030, 0039, 0052
    0060, 0030, 0178, 0019, 0056
    0039

    10

    Sansei
    Sansui
    Sanyo
    Scimitsu
    Scotch
    Scott
    Sears
    Semivox
    Semp
    Sharp
    Shogun
    Sony
    Soundesign
    Squareview
    Starlite
    Supreme
    Sylvania
    Symphonic
    TMK
    Tandy
    Technics
    Technol Ace
    Techwood
    Teknika
    Telefunken
    Tera
    Toshiba
    Totevision
    Vector Research
    Victor
    Vidikron
    Vidtech
    Wards
    White Westinghouse
    Yamaha
    Zenith

    0451
    0463
    0154
    0019
    0178
    0236, 0180, 0178, 0019, 0179
    0047, 0054, 0154, 0156, 0178, 0179, 0056, 0171
    0180
    0156
    0093, 0165, 0039
    0019
    0000
    0180, 0178, 0179
    0171
    0180
    0000
    0054, 0030
    0171
    0178, 0056, 0177
    0093
    0051, 0250
    0179
    0051, 0056
    0054, 0180, 0150, 0060, 0019, 0179, 0056, 0039, 0092
    0056
    0031
    0154, 0156, 0060, 1256
    0039
    0030
    0053
    0054
    0178, 0019
    0054, 0165, 0030, 0178, 0019, 0179, 0056
    0463, 0623, 0624
    0030, 0019
    0017, 0463, 0092, 0624

    11



  • Page 7

    PROGRAMMING VCR CONTROL
    NOTE: If you own a TV/VCR combination, skip this section and
    perform “Programming TV/VCR Combo Control” on page 16.

    Locate the brand name of your VCR in the Setup Codes For
    VCRs section below, and write it in the following space.
    VCR Brand: __________________________________
    The brands are listed in alphabetical order with the most
    popular codes listed first. To program VCR control:
    1.

    Turn on your VCR and insert a video cassette.

    2.

    On the remote control, press VCR once. Press
    and hold SET until the LED blinks twice, then
    release SET.
    NOTE: The remote control will exit programming if
    more than 10 seconds elapse between key presses.

    3.

    Enter the first four-digit code for your VCR. If
    you perform this procedure correctly, the LED
    will blink twice.
    NOTE: If the LED emits a long blink, the code is
    invalid. Repeat steps 2 through 3 and try entering the
    same code again.

    4.

    Aim the remote control at your VCR and press
    POWER once. The VCR should turn off. If your
    VCR remote control does not have a POWER
    key, press PLAY. If the VCR does not respond,
    repeat steps 2-3, trying each code listed for your
    brand until you find one that works. If the VCR
    still does not work , try searching for the code
    (see Searching For Your Code on page 23).

    5.

    Write your VCR code in the boxes below for
    future reference.

    NOTE: Remember, to use the One For All 4-Device Video Expert
    remote control to operate your VCR, press VCR first.

    Setup Codes for VCRs:
    Admiral
    Adventura
    Aiko
    Aiwa
    Akai

    0048, 0209
    0000
    0278
    0037, 0000
    0041

    12

    America Action
    American High
    Asha
    Audiovox
    Beaumark
    Bell & Howell
    Broksonic
    CCE
    Calix
    Canon
    Carver
    Cineral
    Citizen
    Colt
    Craig
    Curtis Mathes
    Cybernex
    Daewoo
    Denon
    Dynatech
    Electrohome
    Electrophonic
    Emerex
    Emerson
    Fisher
    Fuji
    Funai
    GE
    Garrard
    Go Video
    GoldStar
    Gradiente
    HI-Q
    Harley Davidson
    Harman/Kardon
    Harwood
    Hitachi
    Hughes Network
    JVC
    Jensen
    KEC
    KLH
    Kenwood
    Kodak
    LXI
    Lloyd's
    Logik
    MEI
    MGA
    MGN Technology
    MTC

    0278
    0035
    0240
    0037
    0240
    0104
    0184, 0121, 0209, 0002, 0479
    0072, 0278
    0037
    0035
    0081
    0278
    0037, 0278
    0072
    0037, 0047, 0240, 0072, 0271
    0060, 0035, 0041, 0162
    0240
    0045, 0278
    0042
    0000
    0037
    0037
    0032
    0037, 0184, 0000, 0121, 0043, 0209, 0002, 0278, 0479
    0047, 0104
    0035, 0033
    0000
    0060, 0035, 0048, 0202, 0240
    0000
    0526
    0037, 0038
    0000
    0047
    0000
    0081, 0038
    0072
    0000, 0042, 0041
    0042
    0067, 0041
    0041
    0037, 0278
    0072
    0067, 0041, 0038
    0035, 0037
    0037
    0000
    0072
    0035
    0240, 0043
    0240
    0240, 0000
    continued on next page...

    13



  • Page 8

    PROGRAMMING VCR CONTROL
    Setup Codes for VCRs (Continued):
    Magnasonic
    Magnavox
    Magnin
    Marantz
    Marta
    Matsushita
    Memorex
    Minolta
    Mitsubishi
    Motorola
    Multitech
    NEC
    Nikko
    Noblex
    Olympus
    Optimus
    Orion
    Panasonic
    Penney
    Pentax
    Philco
    Philips
    Pilot
    Pioneer
    Profitronic
    Proscan
    Protec
    Pulsar
    Quasar
    RCA
    Radio Shack
    Radix
    Randex
    Realistic
    ReplayTV
    Runco
    STS
    Samsung
    Sanky
    Sansui
    Sanyo
    Scott
    Sears
    Semp
    Sharp
    Shintom
    Shogun

    0278
    0035, 0039, 0081, 0000, 0149
    0240
    0035, 0081
    0037
    0035, 0162, 0454
    0035, 0037, 0048, 0039, 0047, 0240, 0000, 0104, 0209, 0454,
    1037, 1162, 1262
    0042
    0048, 0067, 0043
    0035, 0048
    0000, 0072
    0104, 0067, 0041, 0038
    0037
    0240
    0035
    0037, 0048, 0104, 0162, 0454, 1048, 1062, 1162, 1262
    0184, 0209, 0002, 0479
    0035, 0162, 0225, 0454, 0616, 1062, 1162, 1262
    0035, 0037, 0240, 0042, 0038
    0042
    0035, 0209, 0479
    0035, 0081, 0618
    0037
    0067
    0240
    0060, 0202
    0072
    0039
    0035, 0162, 0454, 1162
    0060, 0035, 0048, 0240, 0042, 0149, 0202
    0000, 1037
    0037
    0037
    0035, 0037, 0048, 0047, 0000, 0104
    0614, 0616
    0039
    0042
    0240, 0045
    0048, 0039
    0000, 0067, 0209, 0041, 0271, 0479
    0047, 0240, 0104
    0184, 0045, 0121, 0043
    0035, 0037, 0047, 0000, 0042, 0104
    0045
    0048
    0072
    0240

    14

    Singer
    Sony
    Sylvania
    Symphonic
    TMK
    Tatung
    Teac
    Technics
    Teknika
    Thomas
    Tivo
    Toshiba
    Totevision
    Unitech
    Vector
    Vector Research
    Video Concepts
    Videosonic
    Wards
    White Westinghouse
    XR-1000
    Yamaha
    Zenith

    0072
    0035, 0032, 0000, 0033
    0035, 0081, 0000, 0043
    0000
    0240
    0041
    0000, 0041
    0035, 0162, 0202
    0035, 0037, 0000
    0000
    0618
    0045, 0043
    0037, 0240
    0240
    0045
    0038
    0045
    0240
    0060, 0035, 0048, 0047, 0081, 0240, 0000, 0042, 0072, 0149
    0209, 0278
    0035, 0000, 0072
    0038
    0039, 0000, 0209, 0033, 0479

    15



  • Page 9

    PROGRAMMING TV/VCR COMBO CONTROL

    6.

    Write your TV/VCR Combo code in the boxes
    below for future reference.

    Locate the brand name of your TV/VCR Combo in the
    Setup Codes For TV/VCR Combos section on the next page,
    and write it in the following space.
    TV/VCR Combo Brand: ________________________

    NOTE: Remember, to use the One For All 4-Device Video Expert
    to operate your TV/VCR Combo, press VCR first.

    The brands are listed in alphabetical order with the most
    popular codes listed first. To program TV/VCR control:
    1.
    2.

    Turn on your TV/VCR Combo and insert a
    video cassette.
    On the remote control, press VCR once. Press
    and hold SET until the LED blinks twice, then
    release SET.
    NOTE: The remote control will exit programming if
    more than 10 seconds elapse between key presses.

    3.

    Enter the first four-digit code for your TV/VCR
    Combo. If you perform this procedure correctly,
    the LED will blink twice.
    NOTE: If the LED emits a long blink, the code is
    invalid. Repeat steps 2 through 3 and try entering the
    same code again.

    4.

    Aim the remote control at your TV/VCR Combo
    and press POWER once. The unit should turn
    off. If it does not respond, repeat steps 2-3, trying each code listed for your brand until you
    find one that works. If it still does not work, try
    searching for the code (see Searching For Your
    Code on page 23).

    5.

    If you’ve located a TV/VCR setup code that
    works your TV/VCR Combo and a separate TV
    code is also listed,you’ll need to program this
    code into the remote control to access volume
    control (see Programming TV Control on page 8).
    If there is no separate TV code listed, you will
    need to perform the following steps to access
    volume control:
    a. Press and hold SET until the LED blinks
    twice, then release SET.

    Setup Codes for TV/VCR Combos:
    Brocksonic
    Citizen
    Colt
    Curtis Mathes
    Daewoo
    Emerson
    Funai
    GE
    GoldStar
    Harley Davidson
    Hitachi
    Lloyd's
    Magnasonic
    Magnavox
    Magnin
    Memorex
    MGA
    Mitsubishi
    Optimus
    Orion
    Panasonic
    Penney
    Quasar
    Radio Shack
    RCA
    Sansui
    Sanyo
    Sears
    Sharp
    Sony
    Sylvania
    Symphonic
    Thomas
    White Westinghouse
    Zenith

    0002, 0479 (TV:0463)
    0278
    0072
    0035 (TV:0051)
    0278 (TV:0624)
    0002, 0479 (TV:0463), 0278 (TV:0624)
    0000
    0060 (TV:0047), 0048 (TV:0093), 0035 (TV:0051), 0240
    0037 (TV:0056)
    0000
    0000
    0000
    0278
    0000, 0081 (TV:0054)
    0240
    1162, 1262, 0162 (TV:0250), 0037 (TV:0056), 1037
    0240
    0048 (TV:0093)
    1162, 1262, 0162 (TV:0250)
    0002, 0479 (TV:0463)
    1162, 1262, 0162 (TV:0250), 0035 (TV:0051)
    0037 (TV:0056), 0035 (TV:0051), 0240
    0162 (TV:0250) , 0035 (TV:0051)
    1037
    0060 (TV:0047), 0048 (TV:0093), 0035 (TV:0051), 0240
    0000, 0479 (TV:0463)
    0240
    0000, 0037 (TV:0056)
    0048 (TV:0093)
    0032 (TV:0000)
    0081 (TV:0054)
    0000
    0000
    0278 (TV:0624)
    0000, 0479 (TV:0463)

    b. Enter 9 - 9 - 3. The LED will blink twice.
    c. Press VCR once. The LED will blink twice.

    16

    17



  • Page 10

    PROGRAMMING CABLE CONVERTER OR
    SATELLITE RECEIVER CONTROL
    Locate the brand name of your Cable Converter or Satellite
    Receiver in the setup codes section starting below, and
    write it in the appropriate space.
    Cable Converter Brand: ________________________
    or
    Satellite Receiver Brand:________________________
    The brands are listed in alphabetical order with the most
    popular codes listed first. To program component control:
    1.

    Turn on the Cable Converter or Satellite Receiver.

    2.

    On the remote control, press CBL/SAT once.
    Press and hold SET until the LED blinks twice,
    then release SET.
    NOTE: The remote control will exit programming if
    more than 10 seconds elapse between key presses.

    3.

    Enter the first four-digit code for your Cable
    Converter or Satellite Receiver. If performed
    correctly, the LED will blink twice.
    NOTE: If the LED emits a long blink, the code is
    invalid. Repeat steps 2 through 3 and try entering the
    same code again.

    4.

    Aim the remote control at your Cable Converter or
    Satellite Receiver and press POWER once.The unit
    should turn off.If it does not respond,repeat steps
    2-3,trying each code listed for your brand until
    you find one that works.If it still does not work ,
    try searching for the code (see page 23).

    5.

    Write your Cable Converter or Satellite Receiver
    code in the boxes below for future reference.

    NOTE: Remember, to use the One For All 4-Device Video Expert
    remote control to operate your Cable Converter or Satellite
    Receiver, press CBL/SAT first.

    Setup Codes for Cable Converters:
    ABC
    Allegro
    Americast
    Antronix

    0003, 0008, 0014, 0017, 0007, 0011, 0013
    0153, 0315
    0899
    0022

    18

    Archer
    Belcor
    Bell & Howell
    Bell South
    Cable Star
    Cabletenna
    Cableview
    Century
    Citizen
    Colour Voice
    Comtronics
    Contec
    Digi
    Eastern
    Emerson
    Everquest
    Focus
    GC Electronics
    Garrard
    Gemini
    General Instrument
    GoldStar
    Goodmind
    Hamlin
    Hitachi
    Hytex
    Jasco
    Jerrold
    Linsay
    Memorex
    Movie Time
    NSC
    Novaplex
    Oak
    Optimus
    Panasonic
    Panther
    Paragon
    Philips
    Pioneer
    Popular Mechanics
    Pulsar
    Quasar
    RCA
    Radio Shack
    Recoton
    Regal
    Regency
    Rembrandt
    Runco
    SL Marx

    0153, 0022, 0797
    0056
    0014
    0899
    0056
    0022
    0022
    0153
    0153, 0315
    0025
    0040
    0019
    0637
    0002
    0797
    0015, 0040
    0400
    0056
    0153
    0015, 0797
    0476, 0276, 0011, 0810
    0144, 0040
    0797
    0020, 0259, 0009, 0034
    0011
    0007
    0015, 0153, 0315
    0003, 0012, 0476, 0276, 0014, 0015, 0011, 0810
    0440
    0000
    0063
    0063
    0618
    0019, 0007
    0021
    0000, 0107, 0021
    0637
    0000
    0153, 0025
    0144, 0533, 0877
    0400
    0000
    0000
    0021
    0015, 0315, 0797, 0883
    0400
    0020, 0259
    0002
    0011
    0000
    0040
    continued on next page...

    19



  • Page 11

    PROGRAMMING CABLE CONVERTER OR
    SATELLITE RECEIVER CONTROL
    Setup Codes for Cable Converters (Continued):
    Samsung
    Scientific Atlanta
    Signal
    Signature
    Sprucer
    Starcom
    Stargate
    Starquest
    TV86
    Tandy
    Teleview
    Timeless
    Tocom
    Toshiba
    Tusa
    Unika
    United Artists
    Universal
    Viewstar
    Zenith
    Zentek

    0144, 0040
    0008, 0477, 0017, 0877
    0015, 0040
    0011
    0021
    0003, 0015
    0015, 0040, 0797
    0015
    0063
    0258
    0040
    0418
    0012, 0013
    0000
    0015
    0153, 0022
    0007
    0153, 0022, 0056, 0191
    0063, 0258
    0000, 0525, 0899
    0400

    PROGRAMMING DVD PLAYER CONTROL
    Locate the brand name of your DVD (or LD) player in the
    Setup Codes For DVDs (or LDs) section on the next page,
    and write it in the following space.
    DVD (or LD) Brand: __________________________
    The brands are listed in alphabetical order with the
    most popular codes listed first. To program DVD (or LD)
    player control:
    1.

    Turn on your DVD (or LD) player.

    2.

    On the remote control, press DVD once.
    Press and hold SET until the LED blinks twice,
    then release SET.
    NOTE: The remote control will exit programming if
    more than 10 seconds elapse between key presses.

    3.

    NOTE: If the LED emits a long blink, the code is
    invalid. Repeat steps 2 through 3 and try entering the
    same code again.

    4.

    Aim the remote control at your DVD (or LD)
    player and press POWER once. The unit should
    turn off. If your DVD (or LD) player remote
    control does not have a POWER key, press
    PLAY. If the DVD (or LD) player does not
    respond, repeat steps 2-3, trying each code listed for your brand until you find one that works.
    If the DVD (or LD) player still does not work ,
    try searching for the code (see Searching For
    Your Code on page 23).

    5.

    Write your DVD (or LD) player code in the
    boxes below for future reference.

    Setup Codes for Satellite Receivers:
    AlphaStar
    Echostar
    Expressvu
    General Instrument
    HTS
    Hitachi
    Hughes Network
    JVC
    Jerrold
    Magnavox
    Memorex
    Next Level
    Panasonic
    Philips
    Primestar
    RCA
    Radio Shack
    Sony
    Star Choice
    Toshiba
    Uniden
    Zenith

    0772
    0775, 1005
    0775
    0627, 0361, 0869
    0775
    0819
    0749
    0775
    0627, 0361
    0724, 0722
    0724
    0869
    0701
    0724, 0722
    0627, 0361
    0566, 0143, 0392, 0855
    0869
    0639
    0869
    0790
    0724, 0722
    0856

    20

    Enter the first four-digit code for your DVD (or
    LD) player. If you perform this procedure correctly, the LED will blink twice.

    NOTE: Remember, to use the One For All 4-Device Video Expert
    remote control to operate your DVD (or LD) player, press DVD first.

    21



  • Page 12

    PROGRAMMING DVD PLAYER CONTROL
    (Continued)
    Setup Codes for DVD Players:
    Denon
    GE
    Harman/Kardon
    JVC
    Kenwood
    Magnavox
    Marantz
    Mitsubishi
    Onkyo
    Optimus
    Panasonic
    Philips
    Pioneer
    Proscan
    RCA
    Samsung
    Sharp
    Sherwood
    Sony
    Technics
    Theta Digital
    Toshiba
    Yamaha
    Zenith

    0490, 0634
    0522
    0582
    0558, 0623
    0534
    0503
    0539
    0521
    0503, 0627
    0571
    0490, 0632
    0503, 0539
    0525, 0571, 0632
    0522
    0522
    0573
    0630
    0633
    0533
    0490
    0571
    0503
    0490, 0545
    0503, 0591

    SEARCHING FOR YOUR CODE
    If your video component does not respond to the One For
    All 4-Device Video Expert remote control after trying all
    of the codes listed for your brand, or if your brand is not
    listed at all, try searching for your code.
    For example, to search for a code for your TV:
    1.

    Turn on your TV.

    2.

    On the remote control, press TV once.
    Press and hold SET until the LED blinks twice,
    then release SET.

    3.

    Enter 9 - 9 - 1. The LED will blink twice.

    4.

    Aim the remote control at the the TV and slowly alternate between pressing POWER and TV.
    Stop when the TV turns off.
    NOTE: In the search mode, the One For All 4-Device
    Video Expert remote control will send IR codes from
    its library to the selected component, starting with the
    most popular code first.

    5.

    Press SET once to lock in the code.

    6.

    To search for the codes of your other components, repeat steps 1 through 5, but substitute
    the appropriate key (i.e., DVD, VCR, or CBL/SAT)
    for the (DVD/LD,VCR, or Cable/Satellite) component you are searching for.

    Setup Codes for LD Players:
    Aiwa
    Denon
    Funai
    Mitsubishi
    NAD
    Optimus
    Panasonic
    Pioneer
    Quasar
    Realistic
    Sony
    Technics

    0203
    0059, 0172
    0203
    0059
    0059
    0059
    0204
    0059
    0204
    0203
    0193, 0201
    0204

    22

    23



  • Page 13

    CHECKING THE CODES
    If you have set up the One For All 4-Device Video Expert
    remote control using the Searching For Your Code procedure, you may need to find out which four-digit code is
    operating your equipment. For example, to find out which
    code is operating your TV:

    PROGRAMMING THE MASTER POWER KEY
    FOR ALL ON/OFF
    With the One For All 4-Device Video Expert, you can
    program the M. POWER key to turn your TV,VCR, DVD,
    and Cable (or Satellite) components on and off with the
    press of one button.

    1.

    Turn on your TV.

    1.

    2.

    On the remote control, press TV once.
    Press and hold SET until the LED blinks twice,
    then release SET.

    On the remote control, press and hold SET
    until the LED blinks twice, then release SET.

    2.

    Enter 9 - 9 - 5. The LED will blink twice.

    3.

    Enter 9 - 9 - 0. The LED will blink twice.

    3.

    Press M.POWER once.

    4.

    To view the code for the first digit, press 1 once.
    Count the number of LED blinks (e.g., 3 blinks
    = 3) and write down the number in the leftmost TV Code box below.

    4.

    Enter the following sequence*:

    5.

    6.

    a. Press TV once.
    b. Press VCR once.

    NOTE: If a code digit is “0”, the LED will not blink.

    c. Press DVD once.

    Repeat step 4 three more times for remaining
    digits. Use 2 for the second digit, 3 for the third
    digit, and 4 for the fourth digit. Finish writing
    down the code in the TV Code boxes below.

    d. Press CBL/SAT once.

    To check for the codes of your other components, repeat steps 1 through 5, but substitute
    the appropriate key (i.e., DVD, VCR, or CBL/SAT)
    for the (DVD/LD,VCR, or Cable/Satellite) component you are checking.Write down the codes
    in the appropriate boxes below.

    5.

    Press and hold SET until the LED blinks twice,
    then release SET.

    6.

    Now, when you press M.POWER once, the
    remote control will direct power to your TV,
    VCR, DVD (or LD) player, and Cable/Satellite
    component and leave the remote control in the
    TV mode.

    * NOTE: If you do not want all of your equipment to power up
    all of the time, you can shorten step 4 to include only those
    devices you want to turn on or off. For example, to just power
    up your TV and DVD (or LD) player, enter the following
    sequence for step 4:

    TV Code

    DVD (or LD) Code

    a. Press TV once.
    b. Press DVD once.
    Now when you press M.POWER once, the One For All 4-Device
    Video Expert remote control will only direct power to your
    DVD (or LD) player and TV, and still leave the remote control
    in the TV mode.

    VCR Code

    Cable/Satellite Code

    24

    25



  • Page 14

    RE-ASSIGNING DEVICE KEYS

    CHANGING VOLUME LOCK

    The One For All 4-Device Video Expert remote control
    can be set up to control a second TV or VCR, or any combination of four video components. For example, to have
    the unit control a TV, a Cable Converter, and two VCRs,
    you will need to re-assign the unused DVD key to operate
    the second VCR as follows:

    The One For All 4-Device Video Expert remote control is
    preset to control the volume of a component through
    your TV.

    1.

    On the remote control, press and hold SET until
    the LED blinks twice, then release SET.

    If your TV is not remote controllable, or if you would like
    the volume to be controlled by a different component, you
    can change the Volume Lock setting to control a volume
    through a non-associated mode (e.g., through the cable in
    the TV mode).

    2.

    Enter 9 - 9 - 2. The LED will blink twice.

    To change Volume Lock to the CBL/SAT mode:

    3.

    Press VCR once, then press DVD once. The LED
    will blink twice.

    1.

    On the remote control, press and hold SET until
    the LED blinks twice, then release SET.

    4.

    Program the DVD key as a second VCR. See
    Programming VCR Control on page 12.

    2.

    Enter 9 - 9 - 3 and then press CBL/SAT once.
    The LED will blink twice.

    3.

    Now, whenever you press VOL +, VOL –, or
    MUTE on the remote control, the volume will be
    controlled by your Cable Converter or Satellite
    Receiver.

    To re-assign other device keys, repeat steps 1 through 4 by
    substituting the key sequence from the following chart for
    a desired component:
    To Re-Assign

    Perform Key Sequence

    VCR as 2nd TV key:

    SET - 9 - 9 - 2 - TV - VCR

    To change Volume Lock to the VCR mode:

    VCR as 2nd DVD key:

    SET - 9 - 9 - 2 - DVD - VCR

    1.

    VCR as 2nd Cbl/Sat key:

    SET - 9 - 9 - 2 - CBL/SAT - VCR

    On the remote control, press and hold SET until
    the LED blinks twice, then release SET.

    VCR back to VCR:

    SET - 9 - 9 - 2 - VCR - VCR

    2.

    Enter 9 - 9 - 3 and then press VCR once.
    The LED will blink twice.

    DVD as 2nd TV key:

    SET - 9 - 9 - 2 - TV - DVD

    3.

    DVD as 2nd VCR key:

    SET - 9 - 9 - 2 - VCR - DVD

    Now, whenever you press VOL +, VOL –, or
    MUTE on the remote control, volume will be
    controlled by your VCR.

    DVD as 2nd Cbl/Sat key:

    SET - 9 - 9 - 2 - CBL/SAT - DVD

    DVD back to DVD:

    SET - 9 - 9 - 2 - DVD - DVD

    CBL/SAT as 2nd TV key:

    SET - 9 - 9 - 2 - TV - CBL/SAT

    CBL/SAT as 2nd DVD key: SET - 9 - 9 - 2 - DVD - CBL/SAT

    To change Volume Lock to the DVD mode:
    1.

    On the remote control, press and hold SET until
    the LED blinks twice, then release SET.

    2.

    Enter 9 - 9 - 3 and then press DVD once.
    The LED will blink twice.

    3.

    Now, whenever you press VOL +, VOL –, or
    MUTE on the remote control, volume will be
    controlled by your DVD (or LD) player.

    CBL/SAT as 2nd VCR key: SET - 9 - 9 - 2 - VCR - CBL/SAT
    CBL/SAT back to CBL/SAT: SET - 9 - 9 - 2 - CBL/SAT- CBL/SAT
    Upon completion of a re-assignment,the LED will blink
    twice to confirm your selection.At that time,you will also
    need to program the remote control to control the new component (see previous sections on Programming VCR Control,
    Programming Cable Converter or Satellite Receiver Control,or
    Programming DVD Player Control).
    26

    27



  • Page 15

    CHANGING VOLUME LOCK (Continued)

    USING KEYMOVER

    To change Volume Lock back to the TV mode:
    1.

    On the remote control, press and hold SET until
    the LED blinks twice, then release SET.

    The One For All 4-Device Video Expert remote control
    includes a Keymover feature that allows you to map (or
    copy) keys from one mode (i.e., source mode)to another
    (i,e, destination mode).

    2.

    Enter 9 - 9 - 3 and then press TV once.
    The LED will blink twice.

    NOTE: The following keys cannot be mapped: TV, DVD, VCR,
    CBL/SAT, SET, M.POWER, V.CONFIG, and macro keys F1~ F4.

    3.

    Now, whenever you press VOL +, VOL –, or
    MUTE on the remote control, volume will be
    again controlled by your TV.

    For example, if your VCR does not have volume control,
    you can map the volume and mute keys from the TV
    mode to the VCR mode as follows:

    To Unlock Volume Lock:
    1.

    On the remote control, press and hold SET until
    the LED blinks twice, then release SET.

    2.

    Enter 9 - 9 - 3 and then press VOL+ once.
    The LED will blink twice.

    USING THE MENU KEY
    On your One For All 4-Device Video Expert remote control, the MENU key works just like the MENU key of your
    original remote control and allows you to access the onscreen menu of the component you have selected (e.g., TV,
    VCR, DVD, or CBL/SAT).
    When you press MENU, the VOL+, VOL–, CH+, and CH –
    keys will allow you to navigate and adjust the on screen
    menu settings just like you would with your original
    remote control.Also, the MUTE key becomes the Menu
    Select key.

    1.

    On the remote control, press and hold SET until
    the LED blinks twice, then release SET.

    2.

    Enter 9 - 9 - 4.

    3.

    For the source mode, press TV once.

    4.

    For the source key, press VOL + once.

    5.

    For the destination mode, press VCR once.

    6.

    For the destination key, press VOL + once.
    The LED will blink twice indicating the keymoved sequence is correct.

    7.

    Repeat steps 1 through 6 twice more,
    substituting VOL – and MUTE as source and
    destination keys in steps 4 and 6.

    Upon completion of the above procedure, you can now
    use your One For All 4-Device Video Expert remote control to control the TV’s volume and mute in the VCR
    mode, as well as in the TV mode.

    To exit out of the Menu mode, press MENU or EXIT to
    return to normal operation.

    28

    29



  • Page 16

    USING MACROS
    With programming, the F1 through F4 keys on your One
    For All 4-Device Video Expert remote control can be setup
    to perform repetitive, time-consuming operations for easy,
    convenient access through the press of a single key.
    The F keys are ideal for home theater operations, setting a
    favorite channel, adding to multiple component uses,
    guide steps, or other multiple functions you would like to
    control with one key press.
    For the optimum in individual customization, you can
    define and program a sequence of events, since each F
    key can hold up to three macros or 12 key presses total.
    Below are a few examples to get you started.
    NOTE: Programming a new macro over an existing one will erase
    the original macro.

    Programming A Favorite Channel

    Programming A Secondary Master Power Key
    With Instant Channel Selection
    Just like the M.POWER key, any F key can be programmed
    to turn on and off your equipment.As an example, you
    want your child to be able to easily turn on the equipment
    and select a favorite premium channel.You can setup a
    sequence using two macros on one F key – the first
    macro will turn on the TV and tune it to channel 3, and
    the second macro will turn on the Cable Box and tune it
    to a desired channel (e.g., 11).
    1.

    On the remote control, press and hold SET until
    the LED blinks twice, then release SET.

    2.

    Enter 9 - 9 - 5. The LED will blink twice.

    3.

    Select an open F key (e.g., F2) and press
    it once.

    4.

    Enter the following sequence:

    With so many channels available through your cable
    system or satellite provider, you can program a macro
    that directly selects a favorite channel with one key press.
    For example, let’s assume your favorite cable programs
    are on channel 71. Use the following instructions to program an F key for direct access of this channel:

    TV,
    POWER, and
    0- 3 (or 0 -0 - 3 if access is over 100 channels)
    5.

    Press and hold SET until the LED blinks twice,
    then release SET.

    6.

    Repeat steps 1 through 5, but this time in
    step 4 enter the following sequence:

    1.

    On the remote control, press and hold SET until
    the LED blinks twice, then release SET.

    2.

    Enter 9 - 9 - 5. The LED will blink twice.

    3.

    Select an open F key (e.g., F1) and press
    it once.

    4.

    Press TV once.

    5.

    Enter the channel number, 7 - 1.

    Now when you press F2 once, the TV will turn on and
    tune to channel 03.When you press F2 once again, the
    Cable Box will turn on and tune to channel 11.

    NOTE: If you have access to over 100 channels, enter
    in 071.

    Clearing A Macro

    Press and hold SET until the LED blinks twice,
    then release SET.

    1.

    On the remote control, press and hold SET until
    the LED blinks twice, then release SET.

    2.

    Enter 9 - 9 - 5. The LED will blink twice.

    3.

    Select an F key (e.g., F1~ F4) you want to clear
    and press it once.

    4.

    Press and hold SET until the LED blinks twice,
    then release SET.

    6.

    Now when you press F1, you will instantly see cable
    channel 71 on your TV set.

    30

    CBL/SAT,
    POWER, and
    1- 1 (or 0 -1- 1 if access is over 100 channels)

    31



  • Page 17

    USING THE VIDEO CONFIGURATION MODE
    The One For All 4-Device Video Expert remote control
    includes a powerful Video Configuration feature that
    allows you to combine the most used functions of your
    Audio/Video equipment into one V.CONFIG mode. The
    features you can combine are organized into five groups
    and can be defined by specific modes as follows:

    4.

    Select a key from Component Group 1 (i.e., VCR
    or DVD) and press it once. Press PLAY to assign
    Function Group 1 (i.e., the transport keys). The
    LED will blink twice.

    5.

    Select a key from Component Group 2 (i.e., TV,
    VCR, or CBL/SAT) and press it once. Press VOL+
    to assign Function Group 2 (i.e., the volume
    keys). The LED will blink twice.

    6.

    Select a key from Component Group 3 (i.e., TV,
    VCR, or CBL/SAT) and press it once. Press CH+
    to assign Function Group 3 (i.e., the channel
    keys). The LED will blink twice.

    7.

    Select a key from Component Group 4 (i.e., TV,
    DVD, VCR, or CBL/SAT) and press it once. Press
    MENU to assign Function Group 4 (i.e., the
    menu keys). The LED will blink twice.

    8.

    Select a key from Component Mode Group 5
    (i.e., TV, VCR, or CBL/SAT) and press it once.
    Press PIP to assign Function Group 5 (i.e., the
    PIP keys). The LED will blink twice.

    9.

    To lock in the Video Configuration, press SET
    until the LED blinks twice, then release SET.

    Function Groups
    • Function Group 1 – Transport Keys (Play, Stop, Fast
    Forward, Rewind, Pause, Record, Forward Scan, and
    Rewind Scan)
    • Function Group 2 – Volume Keys (Volume Up,Volume
    Down, and Mute)
    • Function Group 3 – Channel Keys (Channel Up,
    Channel Down, Digits 0-9, Enter, Previous Channel,
    Sleep, and Display)
    • Function Group 4 – Menu Keys (Menu, Up, Down, Left,
    Right, and Select)
    • Function Group 5 – PIP Keys (Picture-In-Picture, Swap,
    and Move)
    Component (Mode) Groups
    • Component Group 1 – VCR and DVD
    • Component Group 2 – TV,VCR, and Cable/Sat
    • Component Group 3 – TV,VCR, and Cable/Sat
    • Component Group 4 – TV,VCR, Cable/Sat, and DVD
    • Component Group 5 – TV,VCR, and Cable/Sat

    An Example Video Configuration
    From one mode, you would like to play your DVD, use the
    Volume control on the TV, change channels on your Cable
    Box, control the Menu on the Cable Box, and use the PIP
    feature of your TV. To program this Video Configuration
    you would perform the following steps:

    To enable the Video Configuration feature, you’ll need to
    perform the following programming sequence:

    1.

    On the remote control, press V.CONFIG once.

    1.

    On the remote control, press V.CONFIG once.

    2.

    2.

    Press and hold SET until the LED blinks twice,
    then release SET.

    Press and hold SET until the LED blinks twice,
    then release SET.

    3.

    Enter 9 - 7 - 9. The LED will blink twice.

    Enter 9 - 7 - 9. The LED will blink twice.

    4.

    Press DVD once and then press PLAY. The LED
    will blink twice.

    3.

    At this point, you’ll assign Component Groups to Function
    Groups up to five times, depending on how many combinations you need.You can perform any of the following
    steps in any order, as long as you finish the sequence with
    step 9.
    32

    ...continued on next page

    33



  • Page 18

    USING THE VIDEO CONFIGURATION MODE

    TROUBLESHOOTING

    An Example Video Configuration (Continued)

    PROBLEM:

    5.

    6.

    Press TV once and then press VOL+. The LED
    will blink twice.

    Press CBL/SAT once and then press CH+. The
    LED will blink twice.

    SOLUTION: Replace the batteries with two (2) new AA
    alkaline batteries (see page 7).
    PROBLEM:

    LED blinks when you press a key, but home
    entertainment component does not respond.

    SOLUTION: Make sure you are aiming the remote control at
    your home entertainment component and that
    you are within 15 feet of the component you are
    trying to control.
    PROBLEM:

    7.

    LED does not blink when you press a key.

    Press CBL/SAT once and then press MENU. The
    LED will blink twice.

    The remote control does not control home entertainment components or commands are not performing properly.

    SOLUTION: Try all listed codes for the component brand
    being set up. Make sure all components can be
    operated with an infrared remote control.

    8.

    9.

    Press TV once and then press PIP. The LED will
    blink twice.

    PROBLEM:

    To lock in the Video Configuration, press SET
    until the LED blinks twice, then release SET.

    PROBLEM:

    TV/VCR combo does not respond properly.

    SOLUTION: Use the VCR codes for your brand. Some combo
    units may require both a TV code and a VCR
    code for full operation (see page 16).
    No volume on a second TV.

    SOLUTION: Follow instructions in Changing Volume Lock
    (see page 27).
    PROBLEM:

    CH+ , CH – , and PREV.CH do not work for your
    RCA TV.

    SOLUTION: Due to RCA design (1983-1987), only the original
    remote control will operate these functions.
    PROBLEM:

    Changing channels does not work properly.

    SOLUTION: If original remote control required pressing
    ENTER to change channels, press ENTER on the
    remote control after entering a channel number.
    PROBLEM:

    Tried “Search Method” and still could not find a
    working code.

    SOLUTION: For help, call our technical support group at
    1-330-405-8608 on any business day, between
    9 A.M. and 5 P.M., EST.
    PROBLEM:

    Remote control does not turn on Sony or Sharp
    TV/VCR Combo.

    SOLUTION: For power on, these products require programming TV codes on the remote control. For Sony,
    use TV code 0000 and VCR code 0032. For Sharp,
    use TV code 0093 and VCR code 0048.

    34

    35



  • Page 19

    ADDITIONAL INFORMATION
    The One For All 4-Device Video Expert remote control
    does not have any user-serviceable parts. Opening the
    case, except for the battery cover, may cause permanent
    damage to your remote control.
    ©2000 by Universal Electronics Inc. No part of this publication may be reproduced, transmitted, transcribed,
    stored in any retrieval system, or translated to any language, in any form or by any means, electronic, mechanical, magnetic, optical, manual, or otherwise, without the
    prior written permission of Universal Electronics Inc.
    One For All® is a registered trademark of Universal
    Electronics Inc.
    Part No. URC4080

    7/00






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für One for All urc 4080 ofa 4 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von One for All urc 4080 ofa 4 in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 0,32 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info