492770

One for All URC-4730 Seite 2

2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
Teleview 0040
Texscan 0001
Timeless 0418
Tocom 0012, 0013
Torx 0003
Toshiba 0000
Tusa 0015
Unika 0022, 0153, 0207
United Artists 0007
Universal 0022, 0056, 0153, 0191,
0207
ViewMaster 0883
Viewstar 0027, 0060, 0063, 0258
Zenith 0000, 0525, 0899, 0054
Zentek 0400
SETUP CODES FOR RECEIVERS
SATELLITES
AlphaStar 0772
Crossdigital 1109
DishPro 1005, 0775
Echostar 1005, 0775
Expressvu 0775
GE 0566
GOI 0775
General Instrument 0869, 0361, 0627
HTS 0775
Hitachi 0819
Hughes Network
Systems 0749
JVC 0775
Jerrold 0361, 0627
Magnavox 0724, 0722
Memorex 0724
Mitsubishi 0749
Motorola 0869
Next Level 0869
Panasonic 0701
Paysat 0724
Philips 0749, 0724, 1076, 0722
Primestar 0361, 0627
Proscan 0392
RCA 0392, 0566, 0855, 0143
RadioShack 0869
SKY 0856
Samsung 1109
Sony 0639
Star Choice 0869
Toshiba 0749, 0790
Uniden 0724, 0722
Zenith 0856
Programming the AUX key:
The AUX key can be setup to control a second
TV, VCR, or Cable Converter. If you would like
to set up the AUX key for a second TV, follow
the instructions listed below. If you would like
the AUX key to control a second VCR or Cable
Converter, follow the instructions in the “Re-
assigning Device Keys” section to re-assign
the AUX key to accept VCR or Cable
Converter codes. If you are setting up a
second TV:
Locate the brand name of your 2
nd
TV and
then write it in the space below.
2
nd
TV Brand: _______________________
Locate the brand name of your 2
nd
TV in the
“SETUP CODES FOR TVs” section. The
brands are listed in alphabetical order with the
most popular codes listed first. You will use
one of these codes to program your
One For
All Access 4
to operate your 2
nd
TV.
To program the
One For All Access 4
to
operate your 2
nd
TV:
1. Turn on your 2
nd
TV.
2. Press AUX and release. Press and
hold SET until the
One For All
Access 4’s
red light blinks twice,
then release SET.
3. Enter the first four-digit TV code
listed for your brand in the “SETUP
CODES FOR TVs” section. If you
perform this procedure correctly,
the red light will blink twice when
you enter the final digit of your
code.
4. Aim the
One For All Access 4
at
your 2
nd
TV and press POWER.
Your 2
nd
TV should turn off. If your
2
nd
TV does not respond, repeat
steps
2-4, trying each code listed for
your brand until you find the one
that operates your 2
nd
TV.
5. Your
One For All Access 4
is now
programmed to operate your 2
nd
TV. Write your 2
nd
TV code in the
boxes to the left for future
reference.
Searching For Your Code
If your TV, VCR or Cable Converter does not
respond to the
One For All Access 4
after
trying all of the codes listed for your brand, or
if your brand is not listed at all, try searching
for your code. For example, after trying all of
the codes for your TV, you still cannot get the
One For All Access 4
to operate your TV, then:
1. Turn on your TV.
2. Press TV and release. Press and
hold SET until the
One For All
Access 4’s
red light blinks twice,
then release SET.
3. Press 9 - 9 - 1.
4. Slowly alternate between pressing
POWER* and TV until your TV
turns OFF. Make sure that the
One
For All Access 4
is aimed at your
TV during the search. You may
have to press this sequence of
buttons (POWER* then TV) up to
100 times to search the entire
library of codes.
5. When your TV turns OFF, press
and release SET to lock in the
code for your TV.
Your One For All
Access 4
is now programmed to
operate your TV.
NOTE: To search for the codes of your other
components, repeat Steps 1 through 5, only
substitute the appropriate device key (
VCR/
DVD
,
CBL/SAT
or
AUX
) for the component you
are searching for.
*If you are searching for your VCR/DVD
code, you may want to use the PLAY key
instead of the POWER key to search for
your code. When your VCR/DVD starts to
play, press SET to lock in your code.
Learning The Codes Programmed
Into The One For All Access 4
If you have set up the
One For All Access 4
using the “Searching For Your Code”
procedure, you may need to find out which
four-digit code is operating your equipment.
Use this procedure
after you have set up your
components
to find out which four-digit code is
operating your equipment. For example, to
find out which code is operating your TV after
setting up your TV using the “Searching for
Your Code” procedure:
1. Press TV and release. Press and
hold SET until the
One For All
Access 4’s
red light blinks twice,
then release SET.
2. Press 9 - 9 - 0.
3. For the first digit of your four-digit
code, press 1, wait 3 seconds and
count the number of times the red
light (LED) blinks on the
One For
All Access 4
. If the light does not
blink when you press the number
1, the digit is zero.
4. For the second digit, press 2, wait
3 seconds and count the number
of times the red light (LED) blinks
on the
One For All Access 4
. If the
light does not blink when you
press the number 2, the digit is
zero.
5. For the third digit, press 3, wait 3
seconds and count the number of
times the red light (LED) blinks on
the
One For All Access 4
. If the
light does not blink when you
press the number 3, the digit is
zero.
6. For the fourth and final digit, press
4, wait 3 seconds and count the
number of times the red light
(LED) blinks on the
One For All
Access 4
. If the light does not blink
when you press the number 4, the
digit is zero. Now you have your
four-digit code.
NOTE: To find out the code for your other
components, repeat Steps 1 through 6, only
substitute the appropriate device key (
VCR/
DVD
,
CBL/SAT
or
AUX
) for the component
code you wish to learn.
Re-Assigning Device Keys
You can use the
One For All Access 4
to
operate a second TV or a second VCR or any
combination of four home entertainment
components. For example, you may want your
One For All Access 4
to control 1 TV, 1 Cable
Converter and 2 VCRs. To accomplish this,
you must re-assign the AUX key to operate the
desired component, in this case, a second
VCR. The chart below shows you how to re-
assign a particular device key and then set up
your new component.
1. On the remote control, press and
hold SET until the LED blinks
twice, then release SET.
2. Press 9 - 9 - 2. The LED will
blink twice.
3. Press TV once, then press VCR/
DVD once.
4. The DVD key is now ready to be
programmed for your second TV.
(See
Setting Up Your Components
.)
To re-assign other device keys, repeat steps 1
through 4 by substituting the key sequence
from the below chart for the most popular
components:
To Re-Assign Key
Sequence Perform
VCR/DVD as 2nd TV key:
SET - 9 - 9 - 2 - TV - VCR
VCR/DVD as 2nd CBL key:
SET - 9 - 9 - 2 - CBL/ SAT -
VCR
VCR/DVD as 2nd SAT key:
SET - 9 - 9 - 2 - CBL/ SAT -
VCR
VCR/DVD as 2nd AUX key:
SET - 9 - 9 - 2 - AUX - VCR
VCR/DVD back to VCR:
SET - 9 - 9 - 2 - VCR - VCR
AUX as 2nd TV key: SET - 9 - 9 - 2 - TV - AUX
AUX as 2nd CBL key: SET - 9 - 9 - 2 - CBL/SAT -
AUX
AUX as 2nd SAT key: SET - 9 - 9 - 2 - CBL/ SAT -
AUX
AUX as 2nd VCR key: SET - 9 - 9 - 2 - VCR - AUX
AUX back to DVD: SET - 9 - 9 - 2 - AUX - AUX
When a re-assignment is done, the LED will
blink twice to confirm your choice. At that time,
you will need to program the remote control for
the new device (see
Setting Up Your
Components
).
Volume Lock
The
One For All
®
Access 4™
is set to
control the volume of your TV in the TV,
VCR/DVD, CBL/SAT, and AUX modes. If you
want volume to be controlled by a mode
other than TV (e.g., CBL/SAT), change
the Volume Lock setting as follows:
To Change Volume Lock To
Another Mode:
1. On the remote control, press and
hold SET until the LED blinks
twice, then release SET.
NOTE: If your original cable converter remote
control did not have an “ON” key, press
CH▲
on the One For All Access 4 to turn your Cable
Converter ON.
Remember, if you want to use your
One For
All Access 4
to operate your Cable Converter
or Satellite Receiver, press the CBL/SAT key
first.
SETUP CODES FOR CABLE CONVERTERS
ABC 0003, 0008, 0014, 0007,
0001, 0011, 0013, 0017
Allegro 0153, 0315
Americast 0899
Antronix 0022, 0207
Apache 0770
Archer 0022, 0153, 0207, 0797
BBT 0267
Belcor 0056
Bell & Howell 0014
Bell South 0899
Cable Star 0056
Cabletenna 0022
Cableview 0022
Century 0153
Citizen 0153, 0315
Colour Voice 0025, 0031
Comband 0232
Comtronics 0040, 0060
Contec 0019
Digi 0637
Director 0476
Eastern 0002
Emerson 0797
Everquest 0015, 0040
Focus 0400
GC Electronics 0056, 0207
GE 0232
Garrard 0153
Gemini 0015, 0070, 0242, 0797
General Instrument 0476, 0003, 0276, 0011,
0810
GoldStar 0144, 0040
Goodmind 0770, 0797
Hamlin 0009, 0020, 0034, 0259,
0273
Hitachi 0011
Hytex 0007
Jasco 0015, 0153, 0315
Jerrold 0476, 0003, 0276, 0012,
0014, 0015, 0011, 0024,
0810
Linsay 0440
Magnavox 0027
Memorex 0000
Motorola 0476, 1106, 0276, 0810
Movie Time 0063, 0156
NSC 0063, 0070, 0156
Nexus 0770
Novaplex 0618
Oak 0019, 0007
Optimus 0021
Panasonic 0000, 0107, 0021
Panther 0637
Paragon 0000
Philips 0305, 0317, 0025, 0027,
0031, 0153, 0242, 0290
Pioneer 0877, 0144, 0533, 0023
Popular Mechanics 0400
Prelude 0770
Pulsar 0000
Quasar 0000
RCA 0021
RadioShack 0015, 0315, 0797, 0883
Realistic 0207
Recoton 0400
Regal 0020, 0259, 0273
Regency 0002
Rembrandt 0011, 0070
Runco 0000
SL Marx 0040
Samsung 0144, 0040
Scientific Atlanta 0877, 0008, 0006, 0017,
0477
Seam 0510
Signal 0015, 0040
Signature 0011
Sprucer 0021
StarSight 0422, 0542
Starcom 0003, 0015
Stargate 0015, 0040, 0770, 0797
Starquest 0015
Supercable 0276
Sylvania 0001
TFC 0310
TV86 0063
Tandy 0258
TeleCaption 0221
ONE FOR ALL
®
PRODUCTS
90-DAY Limited Warranty
One For All
®
warrants, to the original purchaser only, that this product will be free from
defects in materials and workmanship, under normal use, for ninety (90) days from the
date of original purchase.
This limited warranty is valid only on ONE FOR ALL
®
product purchased and used in
the United States of America or Canada, and does not apply to products used for
industrial or commercial purpose.
The limited warranty does not cover damage or failure caused by products or services
not supplied by ONE FOR ALL
®
, or which result from accident, misuse, abuse, ne-
glect, mishandling, misapplication, faulty installation, set-up adjustment, improper
maintenance, alteration, maladjustment of consumer controls, modifications, commer-
cial use, or that is attributable to acts of God.
There are no express warranties except as listed above. ONE FOR ALL® SHALL NOT
BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM
THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF WARRANTY.
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED
TO THE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the
exclusion or limitation of incidental or consequential damages, or limitations on how
long an implied warranty lasts, so the above exclusions or limitations may not apply to
you. This warranty gives you specific legal rights and you may also have other rights
which vary from state to state.
To obtain warranty service for a defective product during the warranty period, please
return the product, preferably in the original carton, along with your purchase receipt,
to the store of original purchase. A note detailing the complaint would be helpful. The
store, at its option, will replace or repair this product if found to be defective.
One For All
(330) 405-8655
One For All
®
is the registered trademark of Universal Electronics Inc.
Computime International LTD. is the Licensee of the ONE FOR ALL® brand for the
United States of America and Canada.
Copyright 2000 by Universal Electronics Inc. No part of this publication may be repro-
duced, transmitted, transcribed, stored in any retrieval system, or translated to any
language, in any form or by any means, electronic, mechanical, magnetic, optical,
manual, or otherwise, without the prior written permission of Universal Electronics
Inc.
One For All is designed for compatibility in North America excluding Mexico.
URC-4730 - One For All Access 4 08/02
9-9-1
9-9-19-9-1
1
11
2
22
9-9-0
9-9-09-9-0
9-9-3
9-9-39-9-3
Replace the batteries
with four (4) new AAA
alkaline batteries.
Make sure you press
the device key first, then
aim your
One For All
Access 3
at your home
entertainment
component. Also make
sure that you are within
15 feet of the
component you are
trying to operate before
using your remote.
Try all of the codes
listed for your brand of
home entertainment
component in the
“SETUP CODES”
section. Many setup
codes may allow for
partial functionality,
however, only one set
up code will operate
your home entertain-
ment component
correctly. Make sure all
of the components
that you are setting up
can be operated with
an infrared remote
control.
Use the VCR set-up
codes for your brand.
Some combo units,
however, may require
both a TV code to
control volume and a
VCR code for the
remaining functions.
As a safety feature on
the
One For All Access
4
, you must press the
REC key twice.
Due to RCA design
(1983-1987), only the
original remote control
will operate these
functions.
If your original remote
control required an
ENTER keystroke when
changing channels,
press the ENTER key
on the
One For All
Access 4
after you enter
the channel number.
Press and hold SET
until the
One For All
Access 4’s
red light
blinks twice. Release
SET and enter 9-8-7.
Please contact us in
any of the following
ways:
• Please visit :
www.oneforall.com
• If the above website is
not able to provide you
with the information you
need, please email us
at ofasupport@ueic.com
Red light not
blinking when
you press a
key?
The red light
blinks when you
press a key but
you receive no
response from
your home
entertainment
component?
The
One For All
Access 4
does
not operate
your home
entertainment
components or
is not
performing
commands
properly?
Problems
programming a
TV/VCR
combo?
VCR not
recording?
CH▲/▼
(Channel
Up/Down) and
RECALL not
working for your
RCA TV?
Problems
changing
channels?
Keypad
scrambled?
If the above
does not work.
Trouble Shooting
Problem Solution
POWER
POWER
9-9-3
9-9-39-9-3
9-9-2
9-9-29-9-2
VCR
DVD
2. Enter 9 - 9 - 3 and then press
any mode key once (except TV).
The LED will blink twice.
3. Now, whenever you press VOL+,
VOL– ,or MUTE,volume will be
controlled by your mode
choice.
Unlocking Volume Control:
NOTE: Perform these instructions when you
want independent volume control for each
programmed device (e.g., TV volume control in
TV mode, CBL/SAT volume in CBL/SAT mode,
etc.)
1. On the remote control, press and
hold SET until the LED blinks
twice, then release SET.
2. Enter 9 - 9 - 3 and then press
VOL+. The LED will blink four
times.
3. Volume will again be controlled
according to its default states.
3
33
4
44
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für One for All URC-4730 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info