6 WWW.ONEFORALL.COM
Setting Up Your Devices
Example: To set up the ONE FOR ALL 4 for your television:
1 Make sure your device (television) you wish to ope-
rate is switched on (not in standby).
2 Find the code for your device in the Code List (page
80 - 89). The device codes are listed per device type and
brand name. Also the most popular code for each brand is
listed first.
3 Press the device mode key (TV) on the ONE FOR ALL 4
remote for the device you wish to set up.
4 Press and hold down MAGIC until the red light blinks
twice (the red light will blink once then twice).
5 Enter your four-digit device code using the number
keys. The red light will blink twice.
6 Now aim the ONE FOR ALL 4 remote at your device
(television) and press POWER. If your device switched
off, the ONE FOR ALL 4 is ready to operate your device.
7 Turn your device (television) back on and try all the remo-
te’s functions to ensure they are working properly. If the
functions do not work properly, repeat steps 1-6 using
another code listed under your brand.
8 If your device (television) does not respond to the
code entered, follow steps 1-6 with each code listed
for your brand. If none of the codes listed for your
brand operate your device (television), or if your
brand is not listed at all, try the search method
described on page 7.
9 Write your devicecode in the applicable four digit
boxes provided in the battery compartment and on
page 8 for future reference.
Installation
Before you start, please read these instructions carefully
Important notes:
- Some codes are quite similar. If your device does not respond or is not
functioning properly with one of the codes, try another code listed under
your brand.
- For VCR setup: If your VCR’s original remote control does not have a
POWER key, press PLAY instead of POWER during step 6.
- Remember to press the correct device mode key before operating your
device. Only one device can be assigned to each device mode key. If your
original remote control operates more than one device, you need to set up
each device separately.
