122564
10
Zoom out
Zoom in
Vorherige Seite
1/34
Nächste Seite
8 WWW.ONEFORALL.COM
Setting Up Your Other Devices
To set up the ONE FOR ALL 4 Digital for your Television, Video
Recorder or DVD Player, Satellite Receiver or Cable Converter, follow
the instructions below.
Example: to set up the ONE FOR ALL for your TV:
Find your Television code in the
Set-Up Code section (starting on page 11). Codes
are listed by brand name. The most popular code
is listed first. Make sure your Television is
switched on (not in standby).
Press and release your ONE FOR ALL 4 Digital’s TV
key.
Press and hold down the MAGIC key until the
device key blinks twice (the device key will blink
once, then twice).
Enter your four-digit TV code using the number
keys. The device key will blink twice.
Now, aim the ONE FOR ALL 4 Digital at your
Television and press POWER. If your Television
switches off, your ONE FOR ALL 4 Digital should
be ready to run your Television.
If your device (television) does not respond to the code
entered, follow steps 1-5 with each code listed for your
brand. If none of the codes listed for your brand operate
your device (television), or if your brand is not listed at
all, try the search method described on page 9.
Write your code in the four boxes provided in the battery
compartment and on page 11 for easy future reference.
ONE FOR ALL
Acura
Admiral
Adyson
Agazi
AGB
Agef
Aiko
0
0
0
9
0
0
8
7
, 0
0
9
3
, 0
3
6
3
, 0
4
1
0
2
1
7
, 0
2
1
6
0
2
6
4
0
5
1
6
0
0
8
7
0
2
1
6
, 0
0
0
9
, 0
0
3
7
, 0
0
0
3
7
, 0
2
7
4
0
3
6
1
, 0
2
0
8
, 0
3
7
1
,
1
2
3
5
6
7
Installation
Important notes:
- Some codes are quite similar. If your device does not respond or is not
functioning properly with one of the codes, try another code listed under
your brand.
- For VCR setup: If your VCR’s original remote control does not have a
POWER key, press PLAY instead of POWER during step 5.
- Remember to press the correct device mode key before operating your
device. Only one device can be assigned to each device mode key. If your
original remote control operates more than one device, you need to set up
each device separately.
4
____
To set up for a second TV, VCR/DVD or SAT/CBL (See Changing the
Mode of a Device Key, Page 29).
(*) To use the AUX key (see page 28).
Devices can be found under the following keys:
Television
Video Recorder/DVD
Satellite Receiver /
Cable Converter
(*) Television /
(*) Video Recorder /
(*) Satellite Receiver/
Cable Converter
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für One for All urc 7544 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info