670167
11
Zoom out
Zoom in
Vorherige Seite
1/14
Nächste Seite
Use
Power Supply
This unit is designed to operate on wither AC/DC adaptor.
Operation with AC/DC Adaptor.
Insert the small plug of adaptor into the DC Jack.
Insert the AC/DC adaptor in to any convenient having AC~100-240V 50/60 Hz household outlet in vertical or
horizontal direction.
INSTALL THE UNIT ON WALL
1. There are two wall mounting holes on the rear of the unit, push the stand as per the marking on the
stand to the channel of the unit before installing this product.
2. Please make sure your desired wall mount method is able to hold a 5Kg product if you are going to
put this frame on the wall. Seek advice from your local hardware professional.
3. Please ensure there are two stubs or nails on the walls with a distance same as the actual product
on the unit between each other.
4. Please ensure the stubs or nails for on the walls can support minimum 6kg weight.
CLOCK SETTING
1. In STANDBY OFF mode, touch and hold the PROG/TIME SET Button, press SKIP+ or SKIP- to
desired 24H/12H. And press PROG/TIME SET button again
2. Touch SKIP- button to set the desired Hour.
3. Touch SKIP+ button to set the desired Minute.
4. After the desired time has set, touch PROG/TIME SET button to confirm.
WAKE UP TO ALARM BUZZER (AL 1)
a. Keep the unit in standby mode.
b.
button again, the alarm time will blink on the display.
c. Touch the SKIP- BUTTON to set desired alarm hour.
d. Touch the SKIP+ BUTTON to set desired alarm minute.
e. The buzzer will sound at the set alarm time.
WAKE UP TO RADIO/CD/Buzz
a. Keep the unit in standby mode
b. Touch the AL.SET butt
again, the alarm time will blink on the display.
c. Press the SKIP- BUTTON to set desired alarm hour, then press the AL.SET button to move on.
d. Press the SKIP+BUTTON to set desired alarm minute, then press the AL.SET button to move on.
e. - button to choose which function to wake up
to;
- Display showing “Radio” means alarm will be on with Radio.
- Display showing “CD” means alarm will be on with CD. (Make sure the CD is already inserted.
f. The respective function will be turned on at the set alarm time.
AL1 setting is same as AL2 setting
SHUT OFF ALARM
When alarm goes off, press the STANDBY BUTTON to turn off alarm, the alarm will reset for next day
HOW TO TURN OFF THE ALARM
To cancel the alarm mode:
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für OneConcept V-14 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info