Bedienungsanleitung Onkyo BD-SP309 (Seite 4 von 60) (Englisch)

446603

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

12. Region Codes—The BD/DVD standard

uses region codes to control how discs can

be played around the world, the world being

divided into three regions (BD) or six regions

(DVD). This unit will only play BD/ DVD discs

that match its region code, which can be found

on its rear panel.

13. About this Manual—This manual explains

how to use all of this unit’s functions. Although

the BD/DVD standard offers many special

features, not all discs use them all, so

depending on the disc being played, this unit

may not respond to certain functions. See the

disc’s sleeve notes for supported features.

This unit contains a semiconductor laser

system and is classi¿ ed as a “CLASS 1 LASER

PRODUCT”. So, to use this model properly,

read this Instruction Manual carefully. In case of

any trouble, please contact the store where you

purchased the unit.

To prevent being exposed to the laser beam, do

not try to open the enclosure.

CAUTION:

CLASS 1M VISIBLE AND INVISIBLE LASER

RADIATION WHEN OPEN. DO NOT VIEW

DIRECTLY WITH OPTICAL INSTRUMENTS.

THIS PRODUCT UTILIZES A LASER. USE

OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN MAY RESULT

IN HAZARDOUS RADIATION EXPOSURE.

The label on the right is

applied on the rear panel.

1. This unit is a CLASS 1

LASER PRODUCT and

employs a laser inside

the cabinet.

2. To prevent the laser from being exposed,

do not remove the cover. Refer servicing to

quali¿ ed personnel.

For British models

Replacement and mounting of an AC plug on the

power supply cord of this unit should be performed

only by quali¿ ed service personnel.

IMPORTANT

The wires in the mains lead are coloured in

accordance with the following code:

Blue: Neutral

Brown: Live

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured

markings identifying the terminals in your plug,

proceed as follows:

The wire which is coloured blue must be connected

to the terminal which is marked with the letter N or

coloured black.

The wire which is coloured brown must be

connected to the terminal which is marked with the

letter L or coloured red.

IMPORTANT

The plug is ¿ tted with an appropriate fuse. If the

fuse needs to be replaced, the replacement fuse

must approved by ASTA or BSI to BS1362 and

have the same ampere rating as that indicated on

the plug. Check for the ASTA mark or the BSI mark

on the body of the fuse.

If the power cord’s plug is not suitable for your

socket outlets, cut it off and ¿ t a suitable plug. Fit a

suitable fuse in the plug.

For European Models

Declaration of Conformity

We, ONKYO EUROPE

ELECTRONICS GmbH

LIEGNITZERSTRASSE 6,

82194 GROEBENZELL,

GERMANY

declare in own responsibility,

that the ONKYO product

described in this instruction manual is in compliance with

the corresponding technical standards such as EN60065,

EN55013, EN55020 and EN61000-3-2, -3-3.

K. MIYAGI

GROEBENZELL, GERMANY

ONKYO EUROPE ELECTRONICS GmbH.

BD-SP309_EU_En.indb 4 2011/04/28 16:06:24

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo BD-SP309 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo BD-SP309

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info