Bedienungsanleitung Onkyo PR-SC5507 (Seite 152 von 156) (Englisch)

601414

152

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

152

Troubleshooting—Continued

There’s no sound

• Only components connected to analog inputs can be

played in Zone 2/3.

Can’t access the server or Internet radio

• Check the network connection between the AV con-

troller and your router or switch.

• Make sure that your modem and router are properly

connected, and make sure they are both turned on.

• Make sure the server is up and running and compatible

with the AV controller (page 120).

• Check the “Network Settings”(page 121).

Playback stops while listening to music files on

the server

• Make sure your server is compatible with the AV con-

troller (page 120).

• If you download or copy large files on your computer,

playback may be interrupted. Try closing any unused

programs, use a more powerful computer, or use a

dedicated server.

• If the server is serving large music files to several net-

worked devices simultaneously, the network may

become overloaded and playback may be interrupted.

Reduce the number of playback devices on the net-

work, upgrade your network, or use a switch instead

of a hub.

Can’t connect to the AV controller from a Web

browser

• If you’re using DHCP, your router may not always

allocate the same IP address to the AV controller, so if

you find that you can’t connect to a server or Internet

radio station, recheck the AV controller’s IP address

on Network screen.

• Check the “Network settings” (page 121).

Can’t access the music files on a USB device

• Make sure the USB device is plugged in properly.

• The AV controller supports USB devices that support

the USB mass storage device class. However, play-

back may not be possible with some USB devices

even if they conform to the USB mass storage device

class.

• USB memory devices with security functions cannot

be played.

The sound changes when I connect my

headphones

• When a pair of headphones is connected, the listening

mode is set to Stereo, unless it’s already set to Stereo,

Mono, Direct, Pure Audio or DTS Surround Sensa-

tion.

The speaker distance cannot be set as required

• In some cases, corrected values suitable for home the-

ater use may be set automatically.

The display doesn’t work

• The display is turned off when the Pure Audio listen-

ing mode is selected.

How do I change the language of a multiplex

source

• Use the “Multiplex” setting on the “Audio Adjust”

menu to select “Main” or “Sub” (page 94).

The functions don’t work

• To use , you must make an connection and an

analog audio connection (RCA) between the compo-

nent and AV controller, even if they are connected dig-

itally (page 42).

• While Zone 2 or Zone 3 is selected, the functions

don’t work.

The functions Auto Power On/Standby and

Direct Change don’t work for components

connected via

• These functions don’t work when Zone 2/3 is turned

on.

When performing “Audyssey MultEQ

Room Correction and Speaker Setup”, the

measurement fails showing the message

“Ambient noise is too high.”.

• This can be caused by any malfunction in your speaker

unit. Check if the unit produces normal sounds.

Zone 2/3

Music Server and Internet Radio

USB Mass Storage Device Playback

Others

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo PR-SC5507 Seite 152

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo PR-SC5507

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info