527521
3
Zoom out
Zoom in
Vorherige Seite
1/4
Nächste Seite
- 5 - - 6 -
5. Playback
1 2 5 4
BLUETOOTH button and indicator
Wi-Fi indicator
5
4
1
1
2
1
Turn on the AV receiver.
2
Select the input source.
3
Start playback on the source component.
4
Adjust the volume.
5
Select a listening mode and enjoy!
Playing an Audio from Bluetooth enabled Device
You can enjoy music files on Bluetooth-enabled devices such as smart phones or digital music players wirelessly. (Bluetooth-
enabled devices must support A2DP protocol)
Pairing
When you play music files on your Bluetooth-enabled device, you need to establish paring only for the first time.
Look for the following operation procedure of the Bluetooth-enabled device as an input source before establishing pairing. “Procedure
to turn the Bluetooth setting ON” “Procedure to connect the Bluetooth-enabled device to other components”.
1
Put the AV receiver to pairing mode
When you press BLUETOOTH on the front panel of the AV receiver, Bluetooth indicator flashes and the AV receiver is
put to pairing mode.
When establishing pairing with other Bluetooth-enabled device, press and hold down BLUETOOTH on the AV receiver until
the Bluetooth indicator flashes.
The AV receiver can save up to ten pairing information.
2
Connecting to Bluetooth-enabled device
Connect the AV receiver to the Bluetooth-enabled device from a close distance (approx. 1 m) while the indicator on the
AV receiver is flashing.
When a model name of the AV receiver is displayed on the screen of Bluetooth-enabled device, select it. After a short
while, pairing will be completed.
When asked for a password on the Bluetooth-enabled device, enter “0000”.
Enjoying music files by using Bluetooth function
If you connect the AV receiver to your Bluetooth-enabled device with the AV receiver ON, input selector on the AV receiver is
automatically switched to Bluetooth position. Play back the music files in this Bluetooth position status.
It may take 20 seconds or more from turning the AV receiver ON to completing the connection because of the start of Bluetooth
function.
Audio is not output from the AV receiver if audio volume on the Bluetooth-enabled device is set small.
For further information, see
Playback
in the Instruction Manual.
4. Performing Wireless LAN Setup
You can enjoy listening to Internet radio or files on a server (DLNA) through Wi-Fi (Wireless LAN) network. You need to perform
the wireless LAN setup to connect the AV receiver to a wireless device such as a wireless router.
Previous check for wireless LAN router
There are two types of setting, “Automatic” and “Manual”. If your wireless LAN router has a “WPS
button” (*), automatic setup is available. If not, make the setting manually. If the router does not
support WPS, take a note of
a
SSID and
b
Password (secret key) on the label of the router.
Manual setting is available regardless of the “WPS button” on the router.
(*)
The “WPS button” is a standard of Wi-Fi Alliance. The name of the button may differ depending on
the router maker.
Rear Panel
90°
90°
180°
180°
When the AV receiver is connected
to the network by wireless, adjust the
position of the antenna.
Setup procedure
Connect the AV receiver to your TV with HDMI and display the setup screen on the TV. Use a supplied remote controller for the
setting. Press RECEIVER before using the remote controller. Use
e
/
r
or
q
/
w
in the center to select items on the screen, and
press ENTER to confirm. Press RETURN to return to the previous screen. For further information, see “Remote Controller”.
(
Page 8)
1
Display “Wireless setup” menu on your TV
Setup using Initial Setup
Initial Setup function is launched upon first-time use. To perform Initial Setup, move your cursor and click on “Wireless in Network
Connection”, press ENTER, select “Yes on the next screen, and press ENTER. (*2)
Setup not using Initial Setup
This is a setting using Setup Menu (Home Menu). Display “Wireless setup menu by performing the following procedure which contains
five steps.
1. Press Receiver followed by Home on the remote controller.
2. Select “Setup on the screen, and press ENTER.
3. Select “Hardware Setup”, and press ENTER.
4. Select “Network (*1)”, and press ENTER.
5. Select “Network Connection”, move your cursor and click on Wireless”, and press ENTER. (*2)
(*1) When Network is grayed out, please wait until it becomes operable after the communication is completed.
(*2) The reaction may be slow. Please wait for a short while.
2
Select the setting method, Automatic or Manual.
Automatic setting
Select Push Button Configuration (Linksys E/EA Router) (Connection to Linksys E/EA Router) or Push Button Configuration (Other
Routers)”, and press ENTER for North American models.
Select “Push Button Configuration (Select from Router) , and press ENTER for excluding North American models.
Manual setting
Select “Search Wireless Network”, and press ENTER.
3
Automatic setting Manual setting
Select “Push Button (*) and press
ENTER. Press “WPS button” on the
wireless LAN router, select OK on the TV
screen, and press ENTER.
(*) If you select “PIN Code”, PIN code setting is
available. Use this setting in case WPS button is in
the hard location to press, etc. In PIN code setting,
register the displayed eight-digit PIN code with
the wireless LAN router. For registration, see the
instruction manual provided with the wireless LAN
router.
Select SSID of your wireless LAN router
from the list of SSID displayed on the
screen, and press ENTER. Either of the
following options is automatically displayed
in conjunction with the wireless router
setting.
WEP method
1. Select “Default key ID”, and press
ENTER.
2. Select “1 on the next screen. (If you
change WEP key on the router side,
select that number.)
3. Select “Password on the next screen,
and press ENTER.
4. Enter the Password (*) by using a key
board displayed on the screen, select
OK”, and press ENTER.
5. Select “OK on the next screen, and
press ENTER.
(*) Pressing Shift switches between
uppercase and lowercase.
WPA/WPA2 method
1. Select “Password”, and press ENTER.
2. Enter the Password (*) by using a key
board displayed on the screen, select
OK”, and press ENTER.
3. Select “OK on the next screen, and
press ENTER.
(*) Pressing Shift switches between
uppercase and lowercase.
No encryption
You do not need to set the default key ID
nor Password. Select OK on the screen,
and press ENTER. Select OK on the next
screen again, and press ENTER.
4
Connection
Connection is started, and Wi-Fi indicator flashes on the left of the AV receiver display. When connected successfully, Wi-Fi indicator lights.
If the indicator does not light, the connection was not made successfully. Make settings above again. Try the manual setting if the automatic
setting does not work.
5
Enjoying Internet radio
Press HOME on the remote controller, select Network Service on the next screen. You can enjoy various types of Internet functions. For
further information, see “Playback” in the Instruction Manual.
If the settings or operations of Wi-Fi or Bluetooth do not work, see separate volume, “Wi-Fi & Bluetooth Troubleshooting”.
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Onkyo TX-NR828 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Onkyo TX-NR828

Onkyo TX-NR828 Kurzanleitung - Deutsch - 4 seiten

Onkyo TX-NR828 Bedienungsanleitung - Deutsch - 152 seiten

Onkyo TX-NR828 Bedienungsanleitung - Englisch - 152 seiten

Onkyo TX-NR828 Kurzanleitung - Holländisch - 4 seiten

Onkyo TX-NR828 Bedienungsanleitung - Holländisch - 152 seiten

Onkyo TX-NR828 Kurzanleitung - Französisch - 4 seiten

Onkyo TX-NR828 Bedienungsanleitung - Französisch - 152 seiten

Onkyo TX-NR828 Kurzanleitung - Italienisch - 4 seiten

Onkyo TX-NR828 Bedienungsanleitung - Italienisch - 152 seiten

Onkyo TX-NR828 Kurzanleitung - Spanisch - 4 seiten

Onkyo TX-NR828 Bedienungsanleitung - Spanisch - 152 seiten

Onkyo TX-NR828 Kurzanleitung - Schwedisch - 4 seiten

Onkyo TX-NR828 Bedienungsanleitung - Schwedisch - 152 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info