Bedienungsanleitung Onkyo TX-NR906 (Seite 24 von 150) (Englisch)

62439

Zoom out

Zoom in

Vorherige Seite

1/150

Nächste Seite

Connecting the AV Receiver—Continued

Speaker Configuration

For 7.1-channel surround-sound playback, you need

seven speakers and a powered subwoofer.

The following table shows which channels you should

use based on the number of speakers you have.

* If you’re using only one surround back speaker, connect it to the

SURR BACK L terminals.

No matter how many speakers you use, a powered sub-

woofer is recommended for a powerful and solid bass.

To get the best from your surround-sound system, you

must set the speaker settings. You can do this automati-

cally (see page 64) or manually (see page 95).

Using Dipole Speakers

You can use dipole speakers for the surround left and

right and surround back left and right speakers. Dipole

speakers output the same sound in two directions.

Dipole speakers typically have an arrow printed on them

to indicate how they should be positioned. The surround

left and right dipole speakers should be positioned so that

their arrows point toward your TV or screen, while the sur-

round back left and right dipolar speakers should be posi-

tioned so that their arrows point toward each other, as

shown.

Connecting a Powered Subwoofer

Using a suitable cable, connect the AV receiver’s PRE

OUT: SUBWOOFER to the input on your powered sub-

woofer. If your subwoofer is unpowered and you’re

using an external amplifier, connect the PRE OUT:

SUBWOOFER to the amp’s input.

Attaching the Speaker Labels

The AV receiver’s positive (+) speaker terminals are

color-coded for ease of identification. (The negative (–)

speaker terminals are all black.)

The supplied speaker labels are also color-coded and you

should attach them to the positive (+) side of each

speaker cable in accordance with the above table. All

you need to do then is to match the color of each label to

the corresponding speaker terminal.

For North American model

• If you are using banana plugs, tighten the speaker ter-

minal before inserting the banana plug.

• Do not insert the speaker code directly into the center

hole of the speaker terminal.

Number of speakers: 2 3 4 5 6 7

Front left ✓✓✓✓✓✓

Front right ✓✓✓✓✓✓

Center ✓✓✓✓

Surround left ✓✓✓✓

Surround right ✓✓✓✓

Surround back* ✓

Surround back left ✓

Surround back right ✓

7 8

TV/screen TV/screen

1. Subwoofer

2. Front left speaker

3. Center speaker

4. Front right speaker

5. Surround left speaker

6. Surround right speaker

7. Surround back left

speaker

8. Surround back right

speaker

Dipole speakers

Normal speakers

Speaker terminal Color

Front left, Zone 2 left White

Front right, Zone 2 right Red

Center Green

Surround left Blue

Surround right Gray

Surround back left Brown

Surround back right Tan

LINE INPUT

Powered

subwoofer

LINE INPUT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR906 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR906

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info