Bedienungsanleitung Onkyo TX-NR906 (Seite 80 von 150) (Englisch)

62439

Zoom out

Zoom in

Vorherige Seite

1/150

Nächste Seite

Recording

This section explains how to record the input source and

how to record audio and video from separate sources.

Notes:

• The surround sound and DSP listening modes cannot

be recorded.

• Copy-protected DVDs cannot be recorded.

• Sources connected to the analog multichannel input

cannot be recorded.

• Various restrictions apply to digital recording. Refer

to the manuals supplied with your digital recording

equipment for more details.

• Digital input signals are output by only the digital out-

puts, and analog input signals are output by only the

analog outputs. There is no internal conversion from

digital to analog or vice versa.

• DTS signals will be recorded as noise, so don’t

attempt analog recording of DTS CDs or LDs.

• While the Pure Audio listening mode is selected, the

VCR/DVR OUT V and S jacks don’t output video sig-

nals, so select another mode when recording.

Audio sources can be recorded to a recorder (e.g., cas-

sette deck, CDR, MD) connected to the TAPE OUT or

DIGITAL OPTICAL OUT jacks. Video sources can be

recorded to a video recorder (e.g., VCR, DVR) con-

nected to the VCR/DVR OUT jacks. See pages 33 to 50

for hookup information.

Note:

If you select a different input source during recording,

that input source will be recorded instead.

You can overdub audio onto your video recordings by

simultaneously recording audio and video from two sep-

arate sources. This is possible because only the audio

source is switched when an audio-only input source,

such as TAPE, TUNER, or CD, is selected, the video

source remains the same.

In the following example, audio from the CD player con-

nected to the CD IN and video from the camcorder con-

nected to the AUX 2 INPUT VIDEO jack are recorded

by the VCR connected to the VCR/DVR OUT jacks.

Recording the Input Source

Remote

controller

Use the input selector buttons to

select the source that you want

to record.

See “Which Connections Should I

Use?” on page 34 to see which signals

can be output and recorded.

You can watch the source while record-

ing it. The AV receiver’s MASTER

VOLUME control has no effect on

recording.

On your recorder, start record-

ing.

On the source component, start

playback.

DVD

AUX1 AUX

GAME/TV

CBL/SATVCR/DVR

TUNER

TAPE

PHONO

+10

123

456

789

NET/USB

Recording from Different AV Sources

Prepare the camcorder and CD player for

playback.

Prepare the VCR for recording.

Press the [AUX 2] input selector button.

Press the [CD] input selector button.

This selects the CD player as the audio source but

leaves the camcorder as the video source.

Start recording on the VCR, then start

playback on the camcorder and CD player.

Video from the camcorder and audio from the CD

player are recorded by the VCR.

Camcorder

video signal

audio signal

CD Player VCR

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR906 Seite 80

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR906

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info