Bedienungsanleitung Onkyo TX-NR906 (Seite 145 von 150) (Englisch)

62439

145

Zoom out

Zoom in

Vorherige Seite

1/150

Nächste Seite

145

Troubleshooting—Continued

• To control an Onkyo component that’s not connected

via u, or another manufacturer’s component, point

the remote controller at that component. Be sure to

enter the appropriate remote control code first

(page 137).

Can’t learn commands from another remote

controller

• When learning commands, make sure that the trans-

mitting ends of both remote controllers are pointing at

each other.

• Are you trying to learn from a remote controller that

cannot be used for learning? Some commands cannot

be learned, especially those that contain several

instructions.

Can’t record

• On your recorder, make sure the correct input is

selected.

• To prevent signal loops and damage to the AV

receiver, input signals are not fed through to outputs

with the same name (e.g., TAPE IN to TAPE OUT or

VCR/DVR IN to VCR/DVR OUT).

• When the Pure Audio listening mode is selected,

video recording is not possible because no video sig-

nals are output. Select another listening mode.

There’s no sound

• Only components connected to analog inputs can be

played in Zone 2 and Zone 3.

Can’t access the server or Internet radio

• Check the network connection between the AV

receiver and your router or switch.

• Make sure that your modem and router are properly

connected, and make sure they are both turned on.

• Make sure the server is up and running and compatible

with the AV receiver (page 122).

• Check the “Network Settings” (page 128).

Playback stops while listening to music files on

the server

• Make sure your server is compatible with the AV

receiver (page 122).

• If you download or copy large files on your computer,

playback may be interrupted. Try closing any unused

programs, use a more powerful computer, or use a

dedicated server.

• If the server is serving large music files to several net-

worked devices simultaneously, the network may

become overloaded and playback may be interrupted.

Reduce the number of playback devices on the net-

work, upgrade your network, or use a switch instead

of a hub.

Can’t connect to the AV receiver from a Web

browser

• If you’re using DHCP, your router may not always

allocate the same IP address to the AV receiver, so if

you find that you can’t connect to a server or Internet

radio station, recheck the AV receiver’s IP address on

Network screen.

• Check the Network settings (page 128).

Can’t access the music files on a USB device

• Make sure the USB device is plugged in properly.

• The AV receiver supports USB devices that support

the USB mass storage device class. However, play-

back may not be possible with some USB devices

even if they conform to the USB mass storage device

class.

Recording

Zone 2/Zone 3

Music Server and Internet Radio

USB Mass Storage Device Playback

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR906 Seite 145

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR906

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info