HOW TO CONNECT YOUR RECEIVER
6
HOW TO CONNECT YOUR RECEIVER
5
1) LOCATION OF THE RECEIVER
Your receiver should be placed under proper ventilation.
Don't put in completely enclosed cabinet that will restrict the flow of air, Resulting overheating.
The location should be safeguarded from direct sunlight, excess moisture, rough handling or
household pets
Avoid stacking other electronic components on the top of the receiver.
The location should be safely accessible by the cable from your antenna system.
2) CONNECTING THE RECEIVER WITH ANTENNA
Connect the coaxial cable to "ANTENNA.(A/B)" terminal marked at the rear of the receiver. All cable
connectors should be finger tightened, do not use any kind of wrench on the cable over connectors.
The cable should be 75
‰
impedance coaxial twisted at the end with a ‘IEC’ type connector.
< Loop through >
In Automatic Channel Search Menu please set
connection type into Loop through if a link from
tuner A to B is made with a coaxial cable. This
mode will use all settings for tuner A also for
tuner B. Tuner A will be used for watching and
tuner B for recording onlySeparated.In
Automatic Channel Search Menu please set
connection type into Loop through if a link from
tuner A to B is made with a coaxial cable. This
mode will use all settings for tuner A also for tuner B. Tuner A will be used for watching and tuner B
for recording only
3. HOW TO CONNECT YOUR RECEIVER
Please DO NOT plug in the main power supply cord until you have
finished all the connections.
3) CONNECTING THE RECEIVER TO TV
To connect the receiver with your television, you can follow three methods :
through RF cable, and through SCART cable, S-Video Cable.
Connect the RF cable to the terminal marked "TV OUT" at the rear panel of the receiver and its other
end to the TV RF input socket.
In the case of connecting your TV through SCART cable, connect the SCART connector marked TV
to respective SCART port in the TV.
Connect the S-Video cable to the terminal marked ‘S-VIDEO’ at the rear panel of the receiver and its
other end to the TV or VCR S-VIDEO input socket.
4) CONNECTING YOUR VCR
To connect a VCR, the receiver has been provided with SCART at the rear marked ‘VCR'. Using a
SCART
connector, the VCR can be connected to the receiver.
5) CONNECTING EXTERNAL AUDIO HI-FI SYSTEM
To connect any external Audio Hi-Fi system, the receiver has been provided with two RCA
connectors at the back of the receiver, marked with Audio L and R respectively to connect the left and
Right Audio.
6) CONNECTING YOUR ANALOG RECEIVER
To facilitate the user using analog receiver to view analog channels, the receiver has been provided
with a loop through terminal marked as "IF OUT".
Connect the coaxial cable from this terminal to the IF input terminal of your analog receiver. Now by
keeping the receiver in standby, you will be able to tune and view analog channels
from your analog receiver.
