Bedienungsanleitung Oppo dv-981 hd (Seite 46 von 55) (Englisch)

137553

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

SETUP MENU OPTIONS

• Press the left/right ARROW buttons to select the channel to be adjusted.

• Press the up/down ARROW buttons to raise or lower the volume of the selected channel in

0.5dB increments.

• Press the SELECT button to confirm the settings and return to the Audio Setup Page.

Channel trim is generally not required since most A/V receivers have the capability to adjust

channel trim and compensate for speaker sensitivity differences. However if your receiver does

not have such functions, you may adjust channel trim on the DVD player. For most accurate

results, it is recommended that you use test tones from a calibration disc, such as AVIA Guide

to Home Theater, and a SPL (Sound Pressure Level) meter.

7. Audio Delay: To add delay to analog or PCM digital audio output. If you experience

audio/video synchronization problem, you may use this option to add a slight delay to the audio

so it is in-sync with video.

• Press the left/right ARROW buttons to adjust delay. The audio delay can be adjusted in

10ms steps.

• Audio delay does not apply to raw bit stream digital audio output.

8. HDMI Audio: To select digital audio output from the HDMI port. The options are:

• LPCM – Digital audio output via HDMI will be multi-channel Linear PCM format. The Down-

mix setting in the “Speaker Setup Page” will affect whether and how multi-channel audio

content will be down-mixed to stereo. When this option is selected, compressed audio bit

streams will decoded by the DVD player. This setting is recommended when connecting

the HDMI output directly to a TV.

• Auto – Digital audio output via HDMI will be the same as the digital coaxial/optical audio

output for CD, Dolby Digital and DTS audio signals. For high resolution stereo or multi-

channel audio contents such as DVD-Audio and Super Audio CD, the DVD player will send

multi-channel PCM audio signals with the highest available sample frequency and bit

numbers. Depending on the original audio content, the format could be 44.1kHz - 192kHz, 2

- 6 channels. This option is recommended when connecting the HDMI output to an A/V

receiver or processor with HDMI 1.1 or above audio capabilities.

• Off – No digital audio output via HDMI.

NOTE

If you use HDMI to connect audio to an HDMI A/V receiver or audio processor, it is

recommended that you choose 720p or higher HDMI output resolution when playing high

resolution audio content (DVD-Audio and SACD). According to the HDMI specification, the

bandwidth available for audio is proportional to the total bandwidth used by video. At

480p/576p resolution, the HDMI specification can only support 2 channels of audio with high

sample rate (up to 192kHz), or 8 channels of audio with standard sample rate (up to 48kHz).

Depending on the capability of your A/V receiver or audio processor, if you play high

resolution audio content at 480p/576p resolution, you may get reduced audio resolution,

incomplete audio channels, or even no audio/video output at all. Choosing a high HDMI

output resolution such as 720p or 1080i allows enough bandwidth for all high sample rate

audio channels.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oppo dv-981 hd Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info