492713
4
Zoom out
Zoom in
Vorherige Seite
1/7
Nächste Seite
4
2
PUSH
1
1. Remove protection cap and insert
the plug. (
1
)
2. Connect the charger. (
2
~
3
)
3. During charging the LED indicator
lights red. (
4
)
Projector will not charge while
operating.
4.
The LED Charge Indicator will turn
green when battery is fully charged.
This process may take up to3 hours
4
CHARGING THE BATTERY
3
1
2
3
CONNECT VGA/COMPONET SOURCE - (VIDEO IN)
1
2
1
2
or
or
or
1. Connect the AV input source.
(
1
~
2
)
2. After powering on the projector,
press
"Auto Search Source
Button" to change sources.
3. Connect earphones or amplified
external speakers to the audio out
connector of the projector (
3
)
<Note>
1. All other brand and product names are
trademarks or registered trademarks of their
respective companies.
2. The connecting cable of video output
device is not supplied, please contact their
service center.
3. iPod nano/iPod touch/iPhone/iPod classic
(version 5 and above)
4. Designed for iPod/iPhone/Mobile phone/
PMP with TV out functions. Using with
device with audio signal voltage > 0.3Vrms
is not recommended.
CONNECT VGA/COMPONET SOURCE -
(VGA/USB/HDMI/C
OMPONENT
IN
)
1
2
MOLEX
1
2
<Note>
1. For more LED indicator, see page 7.
2. Before using the first time, charge until
battery indicator turns green.
3. After the projector is turned off, the battery
may not start charging right away due to the
high temperature emitted by the projector.
CONNECT VGA/COMPONET SOURCE DATA TRANSFER
<Note> The laptop/PC can only detect the
input source when the Projector is switched on.
The projection will stop when this connection is
made.
1
2
1
2
or
CONNECT INPUT SOURCE
1. Connect the VGA/Component
source device with the Universal I/O
connector.
Insert universal connector with
arrow mark facing up.
2. After powering on the projector,
press
"Auto Search Source
Button" to change sources.
1. Connect laptop or PC for data
transfer to the Projector internal
memory or additional MicroSD
memory using the supplied Male
USB Cable. When connected,
switch the Projector on.
1
2
CONNECT HDMI SOURCE
1. Connect the HDMI source device
to the mini HDMI conne connector.
(
1
~
2
)
2. After powering on the projector,
press
"Auto Search Source
Button" to change sources.
CONNECT USB SOURCE
1. Connect the USB flash drive to the
micro USB port using the female
USB cable. (
1
~
2
)
2. Select
USB Flash Drive from
the Main Menu.
INSERT MICROSD CARD
1. Insert a MicroSD card into the
slot with the gold contacts facing
down.
2. Select
MicroSD Card from
the Main Menu.
<Note> MicroSD card is optional.
or
or
<Note>
1. USB device: Support USB Flash Drive
up to 5V/150mA, but does not support USB
Hard Disk Drive
2. Female USB cable, Component cable,
and HDMI cable are optional accessories.
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Optoma PK301plus wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Optoma PK301plus

Optoma PK301plus Bedienungsanleitung - Spanisch - 7 seiten

Optoma PK301plus Kurzanleitung - Alle Sprachen - 4 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info