612900
58
Zoom out
Zoom in
Vorherige Seite
1/96
Nächste Seite
- 56 -
Instruction Manual Athena
English
TIMER PROGRAMMING
From this menu, indicated by the symbol
, it is possible to establish the installation
ON/OFF parameters (count-down), together with the display of the current installation
zone operating hours.
When programming installation switch-on, all the zones are in the OFF state until the
programmed date, after which, each will enter the operating mode prior to switch off.
The symbols
and will be shown onscreen in this operating mode.
When programming installation switch-off, all zones will enter OFF status on the
programmed date. The symbol
will be shown onscreen in this operating mode.
Note: setting the programmed date to zero will exit the switch on/off
countdown mode before the time fi nalises.
Switch on or off is performed at 00:00. The countdown program acts in all
adjustment zones simultaneously.
• Press [OK] from the timer programming menu to confi gure the countdown program.
Press the
and keys to select one of the switch on or off modes.
Confi gure the date by moving through the date fi eld with the
and arrows and
modify the values with the
and . If [--.--.----] appears in the date fi eld, it means
the date has not been confi gured. After confi guring, press [OK] ] to confi rm. Press the
key
to re-establish the main display screen.
Note: the countdown program cannot be enabled once the extension program
has commenced.
To display the installation operating hours, press the
or keys from the timing
programming menu. The operating hours refer to the temperature zone displayed
before accessing the menu.
Note: The hour counter for the current zone can be zeroed by pressing the [OK]
key for approximately three seconds from the hour counter display menu. The
maximum that can be stored is 65,535 hours.
ESC
ESC
ESC
ESC
ESC
ESC
58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Orbis Athena wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info