Bedienungsanleitung Orbis Mirus (Seite 6 von 10) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

612916

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

CHRONOGRAMS

MANUAL OPERATION (THERMOSTAT)

With the apparatus in normal mode, press the

button and the timer-thermostat

will operate as a normal thermostat, without any time programming, only taking into

account the temperature. The desired temperature is selected simply by pressing

the

or button until it is displayed. The unit will commence operating as a

thermostat ten seconds after the final temperature modification and display the

ambient temperature and the word MANUAL on the screen.

To return to the timer-thermostat mode, press the

button again.

TEMPORARY MANUAL MODE

This mode is used to manually modify the temperatures corresponding to the

consecutive time periods with the same control temperature. When the programme

changes the control temperature type, it will return to the established programme.

To select this when in START mode, press the

or button and the current

time period control temperature will be displayed. If the

or button is pressed

again, the control temperature for the consecutive time periods will be modified,

with the unit entering TEMPORARY MANUAL.

The control temperature symbols will disappear from the display while the

TEMPORARY MANUAL mode is activated and the word MANUAL will appear

flashing.

To exit this mode before completion, turn the programming wheel from START to

any other mode and it will return to START, or the

button can be pressed twice.

Example:

The programmed control temperature is to be temporarily modified to 22ºC, with

the MIRUS programmed with the following parameters:

• Control temperatures: Savings (

) at 17ºC and Comfort ( ) at 20ºC.

• On Tuesday at 18:24.

• With the following programme for this day:

- Savings : 00:00 to 09:00, 13:30 to 20:00 and 22:30 to 00:00h.

- Comfort

: De 09:00h a 13:30h y de 20:00h a 22:30.

This is achieved in START mode by pressing the

or button so that the

control temperature is displayed for the current time period. the

or button is

pressed again to change the temperature value to 22 ºC.

From this moment, the MIRUS will regulate heating On/Off until 22ºC is reached,

during the time that the control temperature is consecutively programmed (the one

just modified) until 20:00 when the control temperature mode is changed in the

programming to Comfort (

Before applying the TEMPORARY MANUAL mode, the display will show the

configured chronogram:

When the TEMPORARY MANUAL mode is activated the display will show the

following:

OFF OPERATION

If the equipment is switched On, pressing the

button will switch it Off, the

heating will not be switched On, the temperatures cannot be modified and the

screen will be OFF. This mode, the unit measures the ambient temperature, but will

not perform any of its functions, except if the temperature falls below +5ºC, at

which point it will activate the de-icing programme and will switch the heating On to

prevent freezing.

This mode is exited by pressing the

button again.

RESET

The RESET is pressed in order to reset the timer-thermostat. Then all the

parameters have to be reprogrammed. In any case, the last weekly programme

entered prior to the reset will remain in memory.

TECHNICAL SPECIFICATIONS

Power supply: Two LR6/AA, 1. Alkaline batteries (not

included)

Switching power: µ 10 (3) A 250 Vac

Contact: AgNi switched, 90/10

Battery duration: Approximately one year

Temperature measurement precision: ± 0.5°C

Temperature update: Every 60 seconds.

Resolution: 0.1°C.

LCD measurement range:: 0ºC to 50ºC

Action type: 1B, 1S, 1T and 1U

Number of programmes: 7 (one for each day of the week)

Minimum programmable times: 30-minute periods

Operational precision: ≤ ±1.2 sec/24 h at 23ºC

Output relay update: Every 60 seconds

Control temperature regulation: Savings

: +5ºC to +25ºC

Comfort

: +15ºC to +35ºC

Anti-freezing: 5ºC

Manual: +5ºC to +35ºC

Regulation type: ON-OFF with 0.3ºC hysteresis

Operating temperature: 0ºC to +50ºC

Transport and storage temperature: -10ºC to +60ºC

Protection class: II according to EN 60335 with correct

installation

Protection type: IP40 according to EN 60529 with

correct installation

Contamination situation: Normal

Transient pulse voltage: 2.5 kV

Ball test temperature: 75ºC (21.2.5); 105ºC (21.2.6)

Connection Screw terminals for wires having a

maximum 2.5 mm² section

 WARNING: Contactors must be employed if the maximum load current

exceeds the switching current.

DIMENSIONS

02.01/2012 A016.32.56113

1 2 3 4 5 6 7

Boiler operation

indicator

Day of the

week

Current time

mbient

temperature

Chronogram.

Indication of

temperatures

Programmed in

time periods

Manual operation

indicator

ORBIS TECNOLOGÍA ELÉCTRICA, S.A.

Lérida, 61 E–28020 MADRID

Telephone:+ 34 91 5672277; Fax:+34 91 5714006

E-mail: info@ orbis.es

http://www.orbis.es

30 138

Start

PROG

No control

temperature symbol

Temporary manual

operation indicator

(flashing)

1 2 3 4 5 6 7

Control temperature symbol for the

current time (flashing)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Orbis Mirus Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info