520301
6
Zoom out
Zoom in
Vorherige Seite
1/7
Nächste Seite
6
GB
the current 10 seconds are on the column on the far right. Each
column to its left means 10 previous seconds.
HOW TO ADJUST SENSITIVITY LEVEL
The sensitivity level affects how the unit rates the air quality. You
may have to adjust the sensitivity according to the actual
environment of the installation or specific needs.
To adjust the sensitivity level,
1. Press [
]. The [ ] indicator will blink.
2. Use [ ] or [ ] to select the desired level.
3. Press [
] to exit. The unit will also return to normal display
after 10 seconds.
Note that the new sensitivity level only applies to future samplings
but not the old ones in memory.
BAD AIR WARNING
When the air quality is considered bad, the [ ] indicator will
appear to show the room needs immediate ventilation. These indicators
will remain lit until the air quality improves.
If the ALARM ON/OFF switch is set on ON, an alarm will also go
off continuously for 10 seconds. If the air quality does not improve,
a beep will be emitted every minute for the next 7 minutes and every
10 minutes afterward. To stop the alarm, press any button. To disable
the feature, set the switch to OFF.
TEMPERATURE AND HUMIDITY
The current temperature and humidity are displayed at all times.
To show the maximum or minimum readings in memory, press [
]
or [ ], respectively. Press the button again to go back to the
current readings. The unit will also do so automatically after 5
seonds.
To clear the memory,press and hold “ C ” button for two seconds.
°C/°F SWITCH
The temperature unit is selected on the °C/°F switch. Slide the switch to
°C for degree Centigrade or °F for degree Fahrenheit. The selected unit
will apply to the current temperature as well as temperatures in memory.
HOW TO USE THE BACKLIGHT
Press [ ] to turn on the backlight for five seconds.
THE RESET BUTTON
This button is used only when the unit is operating in an
unfavorable way. Use a blunt stylus to hold down the button. All
memories will be erased.
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Oregon Scientific AR112N wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Oregon Scientific AR112N

Oregon Scientific AR112N Bedienungsanleitung - Holländisch - 7 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info