520303
7
Zoom out
Zoom in
Vorherige Seite
1/17
Nächste Seite
GB
7
DISPLAY MODES
There are four display modes in ALTIMETER:
Altitude and clock
Altitude and local barometric pressure
Altitude and chronometer
Altitude and temperature
Refer to fig 8 to change among the displays. Within the four display
modes there are four functions can be recalled:
Altitude memory
Altitude alarm
Climbing speed
Climbing speed memory
Note:
The chronometer can also be activated under the climbing speed
mode (fig 8a).
HOW TO SET THE CURRENT ALTITUDE
When you first use the OUTBREAKER, you should set the current
altitude – that is the known altitude at the current location. You can
obtain the correct altitude from a topographical map.
Refer to fig 8b to set the reference altitude.
Note:
The altitude could be re-calibrated in another way by input the
sea-level pressure through the PC software. To connect the watch to
the PC software please refer to section 7.
HOW TO SET THE ALTIMETER ALARM
Refer to fig 9 to set the altimeter alarm.
Once the altitude alarm is set, your OUTBREAKER will emit an
alarm when the set altitude is exceeded.
Note:
a) Both ascending and descending altitude alarm is equipped in the
watch.
b) The altitude alarm as far as the duration of the alarm may also set
through the PC software. To connect the watch to the PC
software please refer to Section 7.
MAXIMUM AND ACCUMULATED
ALTITUDE
You may recall the maximum ascending or descending altitude as far
as the total altitude for ascending and descending. You may also
erase this memory record. (fig 10)
Note:
a) please refer to Section 7 for overall erase memory record.
b) This feasture can be applied companied with the PC docking
station. You may set the threshold value of altitude change on the
watch for the total ascending / descending altitude memory
through the PC software. To connect the watch to the PC
software please refer to section 7.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Oregon Scientific ATP108 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info