Zoom out
Zoom in
Vorherige Seite
1/12
Nächste Seite
Weather Station with Remote Control
Model: BAR289
User Manual
BAR289 Cover R5 7/28/04, 12:12 PM1
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    Weather Station with Remote Control
    Model: BAR289
    User Manual

    BAR289 Cover R5

    1

    7/28/04, 12:12 PM



  • Page 2

    EN

    CONTENTS

    INTRODUCTION

    Contents ................................................................... 1

    Thank you for selecting the Oregon ScientificTM Weather
    Station with Remote Control (BAR289). This powerful
    device bundles time keeping, weather forecast, indoor
    and outdoor temperature, with remote control facility,
    into a single tool you can use from the convenience of
    your home.

    Introduction .............................................................. 1
    Product Overview .................................................... 2
    Front View .............................................................. 2
    Back View .............................................................. 2
    LCD Display ........................................................... 3

    In this box, you will find:

    Remote Control (RE289) - Front View ................... 3
    Remote Control (RE289) - Back View ................... 4



    Main unit (BAR289)

    Remote Sensor (RTHR328N) - Front View ........... 4



    Remote control (RE289)

    Remote Sensor (RTHR328N) - Back View ............ 4



    Remote sensor (RTHR328N)

    Remote Sensor (RTHR328N) - LCD Display ......... 4



    Main unit batteries, 4 x UM-3 (AA) 1.5V

    Getting Started ......................................................... 5



    Remote control batteries, 2 x UM-4 (AAA) 1.5V

    Batteries ................................................................. 5



    Remote sensor batteries, 2 x UM-3 (AA) 1.5V

    Remote Sensor (RTHR328N) ................................... 5
    NOTE The THGR328N (5-Channel) and THR228N
    (3-Channel) remote sensors are also compatible with
    this weather station. If you purchase the THGR328N
    sensor, the humidity reading will not show on the
    BAR289. Additional sensors are sold separately. Please
    contact your local stockist for more information.

    Sensor Set Up ....................................................... 5
    Sensor Data Transmission .................................... 6
    Select Sensor Channel .......................................... 6
    Search for Sensor .................................................. 6
    Clock and Calendar ................................................. 6
    Radio-Controlled Clock .......................................... 6

    Keep this manual handy as you use your new product.
    It contains practical step-by-step instructions, as well
    as technical specifications and warnings you should
    know.

    Turn Radio-Controlled Clock ON / OFF ................. 6
    Set Clock ............................................................... 6
    Switch Clock Display ............................................. 7
    Hourly Chime ......................................................... 7
    Alarm ......................................................................... 7
    View Alarm Settings ............................................... 7
    Set Alarm ............................................................... 7
    Activate Alarm ........................................................ 7
    Silence Alarm ......................................................... 7
    Weather Forecast ..................................................... 8
    Weather Forecast Icons ......................................... 8
    Temperature .............................................................. 8
    Maximum / Minimum Records ............................... 8
    Select Measurement Unit ...................................... 8
    Backlight ................................................................... 8
    Reset System ........................................................... 8
    Remote Control (RE289) .......................................... 8
    Safety and Care ........................................................ 9
    Warnings ................................................................... 9
    Troubleshooting ....................................................... 9
    Specifications ........................................................... 9
    About Oregon Scientific ........................................ 10
    EC-Declaration of Conformity ............................... 10

    1
    BAR289 ENG R5

    1

    7/28/04, 12:35 PM



  • Page 3

    EN

    PRODUCT OVERVIEW
    FRONT VIEW

    1. CHANNEL: Switch remote sensor display
    2. MEMORY: View current, maximum and minimum
    temperature readings

    1

    3. MODE / LIGHT: Change settings / display; activate
    backlight
    2

    6

    4. LCD display
    5. Infrared window
    6. ALARM: View alarm status; set alarm

    3

    7. UP / DOWN: Increase / decrease setting; activate /
    deactivate radio-controlled clock

    4
    7
    5

    BACK VIEW

    1. Wall mount
    2. Table stand
    3. Battery compartment: Uses 4 x UM-3 (AA) 1.5V
    4. RESET hole

    1

    5. °C / °F button
    6. Ventilation holes
    4
    5

    2

    6

    3

    2
    BAR289 ENG R5

    2

    7/28/04, 12:35 PM



  • Page 4

    EN

    Outdoor Temperature Area

    LCD DISPLAY

    3

    1
    1

    4

    3
    2

    1. Outdoor temperature - °C / °F
    4

    2

    2. Channel number (1-5) / reception status
    3. Low battery icon for remote sensor
    4. MAX / MIN temperature

    1. Clock / Alarm / Calendar Area: Radio-controlled
    clock; alarm; calendar

    REMOTE CONTROL (RE289) - FRONT VIEW

    2. Indoor Temperature Area: Maximum, minimum,
    and current readings

    1

    3. Weather Forecast Area: Animated weather forecast
    4. Outdoor Temperature Area: Maximum, minimum,
    and current readings; sensor channel number

    2

    Clock / Alarm / Calendar Area

    3

    6

    4

    1
    5
    7

    2

    7
    8
    3

    9

    4
    5
    6

    1. Time Zone Hour Offset
    2. Time / date / calendar
    3. Channel number 1-5

    1. Infrared signal transmitter

    4. RF clock reception

    2.

    5. Backlight function is deactivated
    (under low battery condition)

    : Activates snooze and backlight on
    the main unit

    3. CHANNEL: Switch remote sensor display

    6. Alarm setting display

    4.

    7. Alarm is activated
    8. Low battery icon for main unit

    5. MEMORY: View current, maximum and minimum
    temperature readings

    9. Hourly chime icon

    6.

    Indoor Temperature Area

    7. MODE: Change settings / display

    : View alarm status; set alarm

    / : Increase / decrease setting; activate /
    deactivate radio-controlled clock

    1
    3
    2

    1. Indoor temperature - °C / °F
    2. Indoor icon
    3. MAX / MIN temperature
    3
    BAR289 ENG R5

    3

    7/28/04, 12:35 PM



  • Page 5

    EN

    REMOTE CONTROL (RE289) - BACK VIEW

    REMOTE SENSOR (RTHR328N) - BACK VIEW

    1

    2
    3
    4
    5
    6

    7

    1

    8

    1. Wall mount
    1. Battery compartment: Uses 2 x UM-4 (AAA) 1.5V

    2. CHANNEL switch (1-5)
    3. RESET
    4. °C / °F

    REMOTE SENSOR (RTHR328N) - FRONT VIEW

    5. SEARCH
    6. EU / UK radio signal format switch
    7. Battery compartment
    8. Fold-out stand
    1

    REMOTE SENSOR (RTHR328N) - LCD DISPLAY
    2

    3

    1. Reception
    2. Channel number (1-5)
    3. Low battery indicator
    4. Time

    1. LCD display
    2. LED status indicator

    5. Temperature - °C or °F

    3. Ventilation duct

    6. Temperature reading

    4
    BAR289 ENG R5

    4

    7/28/04, 12:35 PM



  • Page 6

    EN

    GETTING STARTED

    SENSOR SET UP

    BATTERIES

    1. Open the battery compartment with a small Phillips
    screwdriver and insert the batteries matching the
    polarity (+ and -) as shown below.

    Batteries are supplied with this product:


    Main unit

    4 x UM-3 (AA) 1.5V



    Remote control

    2 x UM-4 (AAA) 1.5V



    Remote sensor

    2 x UM-3 (AA) 1.5V

    Insert batteries before first use, matching the polarity
    as shown in the battery compartment. For best results,
    install batteries in the remote sensor before the main
    unit. Press RESET after each battery change.
    2. Set the channel by pressing the CHANNEL button
    to the required number. If you are using more than
    one sensor, select a different channel for each
    sensor.
    3. Slide the EU / UK switch to the setting which best
    suits your location.
    4. Press RESET.
    5. Place the sensor near the main unit.
    6. Press SEARCH to manually initiate signal sending
    between the sensor and the main unit. The reception
    icon on the main unit will blink for approximately
    3 minutes while it is searching for the sensor. (Refer
    to the "Sensor Data Transmission" section for more
    information.)
    7. Press the °C / °F button to select the setting you want.
    8. Close the remote sensor battery compartment.
    9. Secure the sensor in the desired location using the
    wall mount or table stand.

    To install the main unit batteries:

    To install the remote control batteries:

    To fold out the stand:

    1

    NOTE Do not use rechargeable batteries.
    shows when batteries are low.
    UNIT

    2

    LOCATION

    Main

    Clock / Alarm / Calendar Area

    Remote Sensor

    Outdoor Temperature Area

    For best results:
    • Insert the batteries and select the unit, channel, and
    radio signal format before you mount the sensor.
    • Place the sensor out of direct sunlight and moisture.
    • Do not place the sensor more than 30 metres
    (100 feet) from the main (indoor) unit.
    • Position the sensor so that it faces the main (indoor)
    unit, minimizing obstructions such as doors, walls,
    and furniture.
    • Place the sensor in a location with a clear view to
    the sky, away from metallic or electronic objects.
    • Position the sensor close to the main unit during cold
    winter months as below-freezing temperatures may
    affect battery performance and signal transmission.

    NOTE It is recommended that you use alkaline
    batteries with this product for longer performance.

    REMOTE SENSOR (RTHR328N)
    This product is shipped with the RTHR328N Remote
    Sensor. The main unit can collect data from up to
    5 sensors.
    The THGR328N and THR228N sensors are also
    compatible with this weather station. (Additional sensors
    are sold separately. Contact your local stockist for more
    information.)
    The RTHR328N sensor collects temperature readings
    and signals from official time-keeping organizations for
    the radio-controlled clock.

    BAR289 ENG R5

    5

    NOTE The transmission range may vary and is subject
    to the receiving range of the main unit.

    5

    You may need to experiment with various locations to
    get the best results.

    7/28/04, 12:35 PM



  • Page 7

    EN

    RF signal reception (

    )

    SENSOR DATA TRANSMISSION



    Data is sent from the sensor(s) every 60 Seconds. The
    reception icon shown in the Outdoor Temperature Area
    indicates the status.

    How these signals work together:
    ICON

    ICON

    DESCRIPTION

    The unit has contact with the
    remote sensor and has
    synchronized the time.

    Main unit is searching for
    sensors.

    --- shows in Temp
    Area

    MEANING

    At least 1 channel has been
    found.

    The unit has contact with the
    remote sensor but the time has
    not been synchronized.

    Sensor 1 is sending data. (The
    number shows which sensor is
    selected.)

    The unit has lost contact with
    the remote sensor but the time
    is synchronized.

    The selected sensor cannot be
    found. Search for the sensor or
    check batteries.

    The unit has lost contact with
    the remote sensor and the time
    is not synchronized.
    The unit cannot reach the
    remote sensor.

    SELECT SENSOR CHANNEL
    Press CHANNEL on the main unit, to switch between
    sensors 1-5.

    NOTE To force a manual search for the RF clock
    reception, press and hold SEARCH on the sensor
    (RTHR328N).
    The house icon shows the selected remote sensor.
    TURN RADIO-CONTROLLED CLOCK ON / OFF
    To auto-scan between sensors, press and hold
    CHANNEL for 2 seconds. Each sensor's data will be
    displayed for 3 seconds.

    If you wish to manually set the clock, you must first
    disable the radio-controlled feature. To do this, make
    sure you are not in Setting Mode, then press and hold
    DOWN on the main unit for 2 seconds. To enable it,
    hold UP for 2 seconds.

    To end auto-scan, press CHANNEL or MEMORY.
    SEARCH FOR SENSOR
    To search for a Thermo sensor, simultaneously press
    and hold CHANNEL and MEMORY for 2 seconds.
    NOTE If the sensor is still not found, check the
    batteries.



    When the RF clock is enabled this icon
    appear on the display.

    will



    When the RF clock is disabled this icon
    NOT appear on the display.

    will

    SET CLOCK

    CLOCK AND CALENDAR

    You only need to do this if you have disabled the radiocontrolled clock, or if you are too far from a RF signal.

    This product tracks the time and date based on radiocontrolled signals from the RTHR328N remote sensor,
    or manual settings that you enter.

    1. Press and hold MODE / LIGHT for 2 seconds to enter
    Setting Mode.

    RADIO-CONTROLLED CLOCK
    The time and date are automatically updated by radiocontrolled clock signals from official time-keeping
    organizations in Frankfurt (Germany) and Rugby
    (England) unless you disable this feature. The signals
    are collected by the remote sensor (RTHR328N)
    whenever it is within 1500 km (932 miles) of a signal.

    2. The setting will blink to indicate it can now be changed.
    3. Press UP or DOWN to change the setting.

    Initial reception takes 2-10 minutes, and is initiated when
    you first set up the unit, and whenever you press RESET.
    Once complete, the reception icon will stop blinking.
    The reception icon
    indicates 2 factors:


    shown in the Clock Area

    Connection between the main unit and the sensor
    that collects RF signals (
    )

    BAR289 ENG R5

    4. Press MODE / LIGHT to confirm the setting and
    move to the next one. The order of the settings is:
    time zone hour offset (+ / -23 hours), 12 / 24 hour
    format, hour, minute, year, date / month format,
    month, date, display language and hourly chime
    (ON / OFF).

    6

    6
    7/28/04, 12:35 PM



  • Page 8

    SYMBOL

    Each display will be backlit for 5 seconds and will return
    to the main screen display after 10 seconds.

    LANGUAGE
    English

    HOURLY CHIME

    German

    The hourly chime function when set to ON will beep once
    at the beginning of every hour, and the chime icon
    will show on the display.

    French
    Italian
    Spanish

    ALARM
    This product is equipped with a 2-minute crescendo
    alarm.

    SWITCH CLOCK DISPLAY
    Press MODE / LIGHT to toggle between the following
    clock displays:

    VIEW ALARM SETTINGS


    Press ALARM. The alarm time and status will show in
    the Clock Area.

    RF time with hour-offset time (HH:MM)

    SET ALARM
    1. Press ALARM to switch to alarm display.



    Day of the week

    2. Press and hold ALARM again, for 2 seconds. The
    alarm settings will blink.
    3. Select the hour and minute. Press UP or DOWN to
    change settings. Press ALARM to confirm. The
    alarm will be activated automatically.



    ACTIVATE ALARM

    Calendar

    Press ALARM twice to start toggling between alarm ON
    and alarm OFF.
    shows in the Clock / Alarm Area when the alarm is
    activated.
    NOTE Press MODE, or wait 1 minute to return to clock
    display.



    SILENCE ALARM

    RF time without offset

    When the alarm time is reached, the crescendo alarm
    will sound for 2 minutes and the backlight will turn on for
    5 seconds. To silence the alarm:


    Press
    on the remote control to
    silence it for 8 minutes.

    OR


    Time-zone hour-offset setting



    Press any key on the main unit or remote control
    except
    to mute the alarm and
    activate it again after 24 hours.

    If no button is pressed, the alarm will automatically
    silence after 2 minutes.

    7
    BAR289 ENG R5

    7

    7/28/04, 12:35 PM

    EN

    You can select 1 of the 5 following languages:



  • Page 9

    EN

    WEATHER FORECAST

    BACKLIGHT

    This product forecasts the next 12 to 24 hours of weather
    within a 30-50 km (19-31 mile) radius. The forecast is
    based on barometric pressure trend readings.

    To turn on the backlight for 5 seconds:

    VIEW BAROMETER AREA

    OR





    Press MODE / LIGHT on the main unit.

    Press

    on the remote control.

    appears, the backlight function is
    NOTE When
    deactivated due to low-battery power. Replace with new
    batteries to operate this function again.

    The LCD display shows an animated icon indicating the
    forecasted weather.
    WEATHER FORECAST ICONS
    ICON

    RESET SYSTEM

    DESCRIPTION
    Clear

    Insert a thin blunt instrument into the hole below RESET
    to return to the default settings.

    Partly cloudy

    NOTE When you press RESET, all settings will return
    to default value, and you will lose all stored information.

    Day / Night

    Day / Night

    REMOTE CONTROL (RE289)
    Cloudy

    The remote control interacts with the main unit using
    infrared technology.
    The buttons on the remote control complete the same
    functions as the buttons on the front of the main unit.
    Refer to the following list of functions and see the relevant
    section headings for further information:

    Rainy

    Snowy

    NOTE The night time icon displays from 6 PM to 6 AM.

    TEMPERATURE
    This product can display maximum, minimum and
    current temperatures collected by the remote sensors
    and main (indoor) unit.
    MAXIMUM / MINIMUM RECORDS


    Press MEMORY to toggle between maximum (MAX),
    minimum (MIN) and current records.



    To clear the records, press and hold MEMORY for
    2 seconds. A beep will sound to confirm that the
    memory has been cleared.



    Manually view 1 of 5 sensor channel's data or view
    each channel for 3 seconds using auto-scan - see
    "Select Sensor Channel".



    Force a manual search for the RF clock reception see "Radio-Controlled Clock".



    Enable / disable the radio-controlled clock - see "Turn
    Radio-Controlled Clock On / Off".



    Manually set the clock, calendar and day of the week
    language - see "Set Clock".



    View the 5 different clock displays - see "Switch Clock
    Display".



    View the alarm settings, set the alarm, activate the
    alarm and silence the alarm - see all of "Alarm"
    section.



    View temperature records - see "Maximum /
    Minimum Records".

    NOTE The sensor auto-search function cannot be
    operated by the remote control.

    SELECT MEASUREMENT UNIT
    Press the °C / °F button to choose the setting you want.

    NOTE The main unit must be no more than 4 metres
    (13 feet) from the remote control for a successful
    connection to take place. Point the remote control directly
    at the infrared window on the main unit for optimal
    performance. The remote control cannot perform when
    there is an obstacle between the 2 units.

    The display can show indoor temperatures ranging
    from -5°C to +50°C (23°F to +122°F).

    8
    BAR289 ENG R5

    8

    7/28/04, 12:35 PM



  • Page 10

    Clean the product with a slightly damp cloth and alcoholfree, mild detergent. Avoid dropping the product or
    placing it in a high-traffic location.

    LxWxH

    108 x 17 x 39 mm
    (4.25 x 0.67 x 1.54 inches)

    Weight

    34 grams (0.08 lbs)
    without battery

    Remote Sensor Dimensions

    WARNINGS
    This product is designed to give you years of service if
    handled properly. Oregon Scientific will not be
    responsible for any deviations in the usage of the device
    from those specified in the user instructions or any
    unapproved alterations or repairs of the product.
    Observe the following guidelines:

    LxWxH

    70 x 24.5 x 116 mm
    (2.76 x 0.96 x 4.57 inches)

    Weight

    108 grams (0.24 lbs)
    without battery

    Temperature
    Unit

    °C or °F



    Never immerse the product in water. This can cause
    electrical shock and damage the product.

    Indoor Range

    -5°C to 50°C
    (23°F to 122°F)



    Do not subject the main unit to extreme force, shock,
    or fluctuations in temperature or humidity.

    Outdoor Range

    -20°C to 60°C
    (-4°F to 140°F)



    Do not tamper with the internal components.

    Resolution

    0.1°C (0.2°F)



    Do not mix new and old batteries or batteries of
    different types.

    Memory

    Min / Max



    Do not use rechargeable batteries with this product.



    Remove the batteries if storing this product for a long
    period of time.

    Weather Forecast
    Display



    Do not scratch the LCD display.

    NOTE The technical specification of this product and
    contents of this user manual are subject to change
    without notice. Images not drawn to scale.

    Remote Unit (RTHR328N)
    RF frequency
    433 MHz
    Range
    Up to 30 metres
    (100 feet) with
    no obstructions
    Transmission
    Approx. every 1 minute
    Channel No.
    1, 2, 3, 4 or 5
    Unit
    °C or °F

    TROUBLESHOOTING
    PROBLEM

    SYMPTOM

    REMEDY

    Calendar

    Strange date /
    month

    Change language
    (
    6)

    Clock

    Cannot adjust
    clock

    Disable radiocontrolled clock (

    Cannot autosynch

    1. Adjust batteries
    (
    5)

    Radio-Controlled Clock
    Synchronization
    Clock display
    Hour format

    6)

    2. Press RESET
    (
    8)

    Calendar

    3. Manually activate
    radio-controlled
    clock (
    6)

    Alarm

    Temp

    Shows "LLL" or
    "HHH"

    Temperature is out-ofrange

    Remote
    sensor

    Cannot locate
    remote sensor

    Check batteries (

    Snooze

    5)

    SPECIFICATIONS
    Main Unit Dimensions
    LxWxH

    225 x 24 x 141 mm
    (8.86 x 0.94 x 5.55 inches)

    Weight

    542 grams (1.19 lbs)
    without battery

    Sunny (day / night),
    partly cloudy (day /
    night), cloudy, rainy,
    snowy

    Auto or disabled
    HH:MM
    12hr AM / PM
    (MSF format)
    24hr (DCF format)
    DD / MM or MM / DD;
    Day of the week in 1 of 5
    languages (E, G, F, I, S)
    Daily with 2-minute
    crescendo
    8-minute snooze
    (operated by remote
    control only)

    Power
    Main unit
    Batteries

    4 x UM-3 (AA) 1.5V

    Remote Control
    Batteries

    2 x UM-4 (AAA) 1.5V

    Remote Sensor
    Batteries

    2 x UM-3 (AA) 1.5V

    9
    BAR289 ENG R5

    9

    7/28/04, 12:35 PM

    EN

    Remote Control Dimensions

    SAFETY AND CARE



  • Page 11

    EN

    NOTE It is recommended that you use alkaline
    batteries with this product for longer performance.

    EC-DECLARATION OF CONFORMITY

    ABOUT OREGON SCIENTIFIC

    This product contains the approved transmitter module
    that complies with the essential requirements of
    Article 3 of the R&TTE 1999 / 5 / EC Directive, if used
    as intended and the following standards have been
    applied:

    Visit our website (www.oregonscientific.com) to learn
    more about Oregon Scientific products such as digital
    cameras; MP3 players; children's electronic learning
    products and games; projection clocks; health and
    fitness gear; weather stations; and digital and conference
    phones. The website also includes contact information
    for our customer care department in case you need to
    reach us, as well as frequently asked questions and
    customer downloads.

    Safety of information technology equipment
    (Article 3.1.a of the R&TTE Directive)
    Applied Standard
    EN 60950: 2000
    Electromagnetic compatibility
    (Article 3.1.b of the R&TTE Directive)
    Applied Standards
    ETSI EN 301 489-1-3 (Ver.1.4.1): 2002-08

    We hope you will find all the information you need on
    our website, however if you'd like to contact the Oregon
    Scientific Customer Care department directly, please
    visit: www2.oregonscientific.com/service/support

    Efficient use of radio frequency spectrum
    (Article 3.2 of the R&TTE Directive)
    Applied Standards
    ETSI EN 300 220-3 (Ver1.1.1): 2000-09

    OR
    Call 949-608-2848 in the US.

    Additional information:
    The product herewith complies with the requirements of
    the Low Voltage Directive 73 / 23 / EC, the EMC Directive
    89 / 336 / EC and carries the CE marking accordingly.

    For international enquiries, please visit:
    www2.oregonscientific.com/about/international/
    default.asp

    Carmelo Cubito
    Agrate Brianza (MI) / Italy January 2004
    Manufacturer's EU R&TTE Representative

    COUNTRIES RTTE APPROVAL COMPLIED
    All EC countries, Switzerland CH
    and Norway

    10
    BAR289 ENG R5

    10

    7/28/04, 12:35 PM

    N



  • Page 12

    © 2004 Oregon Scientific. All Rights Reserved.
    P/N.:086-000000-000

    BAR289 ENG Back R5

    1

    7/28/04, 12:12 PM






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Oregon Scientific BAR289 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Oregon Scientific BAR289 in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 0,41 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Oregon Scientific BAR289

Oregon Scientific BAR289 Bedienungsanleitung - Deutsch - 13 seiten

Oregon Scientific BAR289 Bedienungsanleitung - Holländisch - 12 seiten

Oregon Scientific BAR289 Bedienungsanleitung - Französisch - 13 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info