Bedienungsanleitung Oregon Scientific BAR289 (Seite 7 von 12) (Englisch)

492497

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

SENSOR DATA TRANSMISSION

Data is sent from the sensor(s) every 60 Seconds. The

reception icon shown in the Outdoor Temperature Area

indicates the status.

NOTE

SELECT SENSOR CHANNEL

Press CHANNEL on the main unit, to switch between

sensors 1-5.

The house icon shows the selected remote sensor.

To auto-scan between sensors, press and hold

CHANNEL for 2 seconds. Each sensor's data will be

displayed for 3 seconds.

To end auto-scan, press CHANNEL or MEMORY.

SEARCH FOR SENSOR

To search for a Thermo sensor, simultaneously press

and hold CHANNEL and MEMORY for 2 seconds.

If the sensor is still not found, check the

batteries.

CLOCK AND CALENDAR

This product tracks the time and date based on radio-

controlled signals from the RTHR328N remote sensor,

or manual settings that you enter.

RADIO-CONTROLLED CLOCK

The time and date are automatically updated by radio-

controlled clock signals from official time-keeping

organizations in Frankfurt (Germany) and Rugby

(England) unless you disable this feature. The signals

are collected by the remote sensor (RTHR328N)

whenever it is within 1500 km (932 miles) of a signal.

Initial reception takes 2-10 minutes, and is initiated when

you first set up the unit, and whenever you press RESET.

Once complete, the reception icon will stop blinking.

The reception icon

shown in the Clock Area

indicates 2 factors:

• Connection between the main unit and the sensor

that collects RF signals (

)

• RF signal reception (

)

How these signals work together:

To force a manual search for the RF clock

reception, press and hold SEARCH on the sensor

(RTHR328N).

TURN RADIO-CONTROLLED CLOCK ON / OFF

If you wish to manually set the clock, you must first

disable the radio-controlled feature. To do this, make

sure you are not in Setting Mode, then press and hold

DOWN on the main unit for 2 seconds. To enable it,

hold UP for 2 seconds.

• When the RF clock is enabled this icon

will

appear on the display.

• When the RF clock is disabled this icon

will

NOT appear on the display.

SET CLOCK

You only need to do this if you have disabled the radio-

controlled clock, or if you are too far from a RF signal.

1. Press and hold MODE / LIGHT for 2 seconds to enter

Setting Mode.

2. The setting will blink to indicate it can now be changed.

3. Press UP or DOWN to change the setting.

4. Press MODE / LIGHT to confirm the setting and

move to the next one. The order of the settings is:

time zone hour offset (+ / -23 hours), 12 / 24 hour

format, hour, minute, year, date / month format,

month, date, display language and hourly chime

(ON / OFF).

Main unit is searching for

sensors.

At least 1 channel has been

found.

Sensor 1 is sending data. (The

number shows which sensor is

selected.)

The selected sensor cannot be

found. Search for the sensor or

check batteries.

ICON DESCRIPTION

--- shows in Temp

Area

ICON MEANING

The unit has contact with the

remote sensor and has

synchronized the time.

The unit has contact with the

remote sensor but the time has

not been synchronized.

The unit has lost contact with

the remote sensor but the time

is synchronized.

The unit has lost contact with

the remote sensor and the time

is not synchronized.

The unit cannot reach the

remote sensor.

NOTE

BAR289 ENG R5 7/28/04, 12:35 PM6

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oregon Scientific BAR289 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oregon Scientific BAR289

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info