Zoom out
Zoom in
Vorherige Seite
1/19
Nächste Seite
1
EN
CONTENTS
Contents ................................................................ 1
Introduction ........................................................... 2
Product Overview ................................................. 2
Front View ......................................................... 2
Back View ......................................................... 3
LCD Display ...................................................... 4
Remote Sensor (THN122N).............................. 5
Getting Started ...................................................... 6
Batteries ............................................................ 6
AC Adaptor ........................................................ 7
Change Settings................................................ 7
Remote Sensor (THN122N) .................................. 8
Setup Sensor .................................................... 8
Data Transmission ............................................ 9
Search for Sensor ............................................. 10
Clock ...................................................................... 10
Turn Clock ON / OFF ........................................ 10
Set Clock / Calendar ......................................... 11
Switch Clock Display......................................... 11
Alarm...................................................................... 11
View Alarm Settings .......................................... 11
Set Alarm........................................................... 11
Activate Alarm ................................................... 11
Silence Alarm .................................................... 12
Weather Forecast.................................................. 12
Temperature .......................................................... 13
Select Temperature Unit.................................... 13
Minimum / Maximum Records........................... 13
Moon Phase........................................................... 13
Backlight................................................................ 13
Reset System ........................................................ 14
Projection Unit ...................................................... 14
Safety and Care..................................................... 14
Warnings................................................................ 14
Troubleshooting.................................................... 15
Specifications........................................................ 16
Main Unit Dimensions ....................................... 16
Remote Sensor Dimensions ............................. 16
Temperature...................................................... 16
Remote Sensor (THN122N).............................. 16
Clock / Projector................................................ 16
Power ................................................................ 17
About Oregon Scientific....................................... 17
EC-Declaration of Conformity.............................. 18
BAR623P_EN_R2.p65 7/27/04, 12:40 AM1
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    EN

    CONTENTS
    Contents ................................................................
    Introduction ...........................................................
    Product Overview .................................................
    Front View .........................................................
    Back View .........................................................
    LCD Display ......................................................
    Remote Sensor (THN122N) ..............................
    Getting Started ......................................................
    Batteries ............................................................
    AC Adaptor ........................................................
    Change Settings ................................................
    Remote Sensor (THN122N) ..................................
    Setup Sensor ....................................................
    Data Transmission ............................................
    Search for Sensor .............................................
    Clock ......................................................................
    Turn Clock ON / OFF ........................................
    Set Clock / Calendar .........................................
    Switch Clock Display .........................................
    Alarm ......................................................................
    View Alarm Settings ..........................................
    Set Alarm ...........................................................
    Activate Alarm ...................................................
    Silence Alarm ....................................................

    Weather Forecast ..................................................
    Temperature ..........................................................
    Select Temperature Unit ....................................
    Minimum / Maximum Records ...........................
    Moon Phase ...........................................................
    Backlight ................................................................
    Reset System ........................................................
    Projection Unit ......................................................
    Safety and Care .....................................................
    Warnings ................................................................
    Troubleshooting ....................................................
    Specifications ........................................................
    Main Unit Dimensions .......................................
    Remote Sensor Dimensions .............................
    Temperature ......................................................
    Remote Sensor (THN122N) ..............................
    Clock / Projector ................................................
    Power ................................................................
    About Oregon Scientific .......................................
    EC-Declaration of Conformity ..............................

    1
    2
    2
    2
    3
    4
    5
    6
    6
    7
    7
    8
    8
    9
    10
    10
    10
    11
    11
    11
    11
    11
    11
    12

    1
    BAR623P_EN_R2.p65

    1

    7/27/04, 12:40 AM

    12
    13
    13
    13
    13
    13
    14
    14
    14
    14
    15
    16
    16
    16
    16
    16
    16
    17
    17
    18



  • Page 2

    EN

    INTRODUCTION

    PRODUCT OVERVIEW

    Thank you for selecting the Oregon Scientific™ Wireless
    Weather Station (BAR623P / BAR623PU). This device
    bundles precise time keeping with a projection clock,
    weather forecast, and indoor and outdoor temperature
    monitoring features into a single tool you can use from
    the convenience of your home.

    FRONT VIEW

    In this box, you will find:






    Main unit with projection clock
    Main unit batteries, 3 x UM-3 (AA) 1.5V
    Main unit 4.5V AC / DC adaptor with jack
    Remote sensor (THN122N)
    Remote sensor batteries, 2 x UM-4 (AAA) 1.5V

    Keep this manual handy as you use your new product.
    It contains practical step-by-step instructions, as well as
    technical specifications and warnings you should know.
    1. SNOOZE / LIGHT button
    2.
    and
    : Increase or decrease setting / activate
    or deactivate RF Clock
    3. MODE: Change display / settings
    4.
    : View alarm status; set alarm
    5.
    : Press to activate or deactivate alarm
    6. Clock and outdoor temperature projector unit
    7. LCD display
    2
    BAR623P_EN_R2.p65

    2

    7/27/04, 12:40 AM



  • Page 3

    EN

    BACK VIEW
    1.
    2.
    3.
    4.
    5.
    6.
    7.

    Projector FOCUS knob
    Projector IMAGE ROTATION knob
    PROJECTION ON / OFF switch
    AC / DC adaptor plug cover
    Battery compartment (cover off)
    SEARCH button to locate the remote sensor
    MEM: View current, maximum, and minimum
    temperature readings
    8. °C / °F switch
    9. RESET hole
    10. Battery compartment (cover on)
    11. Fixed table stand

    3
    BAR623P_EN_R2.p65

    3

    7/27/04, 12:40 AM



  • Page 4

    EN
    LCD DISPLAY
    1. Weather display
    2. Radio Frequency (RF) reception icon
    3. Alarm activated
    4. Alarm setting
    5. Time
    6. Indoor temperature
    7. Low battery icon for main unit
    8. °C / °F (Outdoor temperature)
    9. Sensor signal
    10. Low battery icon for sensor
    11. Outdoor temperature
    12. Calendar
    13. Moon Phase

    4
    BAR623P_EN_R2.p65

    4

    7/27/04, 12:40 AM



  • Page 5

    EN

    REMOTE SENSOR (THN122N)

    1.
    2.
    3.
    4.
    1. LED status indicator

    Wall mount hole
    RESET hole
    CHANNEL number (1-3)
    Battery compartment
    (Battery compartment cover not shown)

    5
    BAR623P_EN_R2.p65

    5

    7/27/04, 12:40 AM



  • Page 6

    EN

    GETTING STARTED

    Installing the batteries:

    BATTERIES
    Batteries are supplied with this product:
    Main unit
    Remote unit

    3 x UM-3 (AA) 1.5V batteries
    2 x UM-4 (AAA) 1.5V batteries

    Insert batteries before first use, matching the polarity
    (+ and -) as shown in the battery compartment. For best
    results, install batteries in the remote sensor before the
    main unit. Press RESET after each battery change.
    UNIT

    NOTE Do not use rechargeable batteries.
    shows when batteries are low.

    LOCATION

    Main

    Indoor Temperature Area

    Remote

    Outdoor Temperature Area

    NOTE It is recommended that you use alkaline batteries
    with this product for longer performance.

    6
    BAR623P_EN_R2.p65

    6

    7/27/04, 12:40 AM



  • Page 7

    EN

    AC ADAPTOR

    CHANGE SETTINGS

    The main unit has a 4.5V AC / DC adaptor with jack,
    which provides continuous clock / temperature projection.

    To change, time, calendar and language settings:
    1. Press and hold MODE for 2 seconds to enter setting
    mode.
    2. Press
    or
    to change settings. (To reach the
    setting you want quickly, press and hold
    or
    .)
    3. Press MODE to confirm.

    Inserting the adaptor:

    7
    BAR623P_EN_R2.p65

    7

    7/27/04, 12:40 AM



  • Page 8

    EN

    Installing the batteries:

    REMOTE SENSOR (THN122N)
    This product is shipped with a THN122N Thermometer
    Sensor that collects Temperature data. The main unit
    can be connected to only 1 remote sensor.

    SETUP SENSOR
    1. Open the remote sensor battery compartment with
    a small Phillips screwdriver.
    2. Insert the batteries, matching the polarity (+ and -)
    as shown in the battery compartment.
    3. Set the channel switch to any channel. The switch is
    located in the battery compartment.
    4. Place the sensor near the main unit. Press RESET
    on the sensor. Then, press and hold SEARCH on
    the main unit to initiate signal sending between the
    sensor and the main unit. The reception icon on the
    main unit will blink for approximately 3 minutes while
    it is searching for the sensor. (Refer to the Sensor
    Data Transmission section for more information.)
    5. Close the remote sensor battery compartment.
    6. Secure the sensor in the desired location using the
    wall mount or table stand.

    Using the stand or wall mount:

    8
    BAR623P_EN_R2.p65

    8

    7/27/04, 12:40 AM



  • Page 9

    EN

    For best results:









    DATA TRANSMISSION
    Data is sent from the sensor every 40 seconds. The
    reception icon shown in the Temperature Area shows
    the status.

    Insert the batteries and select the channel before
    you mount the sensor.
    Place the sensor out of direct sunlight and
    moisture.
    Do not place the sensor more than 30 metres
    (98 feet) from the main (indoor) unit.
    Position the sensor so that it faces the main
    (indoor) unit, minimizing obstructions such as
    doors, walls, and furniture.
    Place the sensor in a location with a clear view
    to the sky, away from metallic or electronic
    objects.
    Position the sensor close to the main unit during
    cold winter months as below-freezing
    temperatures may affect battery performance and
    signal transmission.

    ICON

    DESCRIPTION
    Main unit is searching
    for the sensor
    A Channel has been
    found

    --- show in Outdoor
    Temp Area

    The sensor cannot be
    found. Search for the
    sensor or check batteries

    You may need to experiment with various locations to
    get the best results.

    9
    BAR623P_EN_R2.p65

    9

    7/27/04, 12:40 AM



  • Page 10

    EN
    SEARCH FOR SENSOR

    Once complete, the reception icon will stop blinking. The
    icon is shown in the Clock Area.

    To search for the sensor, press and hold SEARCH for 2
    seconds.

    STRONG SIGNAL WEAK SIGNAL

    NO SIGNAL

    NOTE If the sensor is still not found, check the batteries,
    obstructions, and remote unit location.
    NOTE Signals from household devices such as
    doorbells, electronic garage doors, and home security
    systems may cause temporary reception failure. This is
    normal and does not affect general product performance.
    The reception will resume once the interference ends.

    To force a manual search for clock signals, press and
    hold
    for 2 seconds. If no signal is found, check the
    batteries.

    TURN CLOCK ON / OFF
    Perform this step if you cannot receive clock signals.
    Press and hold for 2 seconds. Then, manually set the
    clock following the “Set Clock” instructions (below).

    CLOCK
    The clock automatically synchronizes the current time
    and date when it is brought within range of the radio
    signal DCF77 generated from Frankfurt, Germany for
    Central Europe (model BAR623P) or MSF60 generated
    from Rugby, England (model BAR623PU).

    The signal icon indicates that the clock feature is
    ON. No icon means that it is OFF.

    NOTE The signals are collected by the main unit when
    it is within 1500 km (932 miles) of a signal.
    Initial reception takes 2-10 minutes, and is initiated when
    you first setup the unit, and whenever you press RESET.
    10
    BAR623P_EN_R2.p65

    10

    7/27/04, 12:40 AM



  • Page 11

    EN

    SET CLOCK / CALENDAR

    ALARM

    You only need to do this if you have disabled the clock
    feature (for example, if you are too far from or cannot
    receive a signal).

    This product is equipped with a 2-minute crescendo
    alarm.

    1. Press and hold MODE for 2 seconds. The Clock Area
    will blink.
    2. Select the hour, minute, year, month, day, and day
    of the week language. Press
    or
    to change the
    setting.
    3. Press MODE to confirm.

    VIEW ALARM SETTINGS

    The language options are (E) English, (F) French, (D)
    German, (I) Italian, and (S) Spanish.

    1. Press
    to switch to alarm display.
    2. Press and hold
    again for 2 seconds. The alarm
    settings will blink.
    3. Select the hour and minute. Press or to change
    settings. Press
    to confirm.

    Press
    . The alarm time and status will show in the
    Clock Area.

    SET ALARM

    SWITCH CLOCK DISPLAY
    Press MODE to toggle between Clock with Seconds and
    Clock with Weekday display.

    ACTIVATE ALARM
    Press
    to activate or deactivate the alarm.
    shows
    in the Clock / Alarm Area when the alarm is activated.

    11
    BAR623P_EN_R2.p65

    11

    7/27/04, 12:40 AM



  • Page 12

    EN
    SILENCE ALARM

    WEATHER FORECAST

    When the alarm time is reached, the crescendo alarm
    will sound for 2 minutes. To silence the alarm:

    This product forecasts the next 12 to 24 hours of weather
    within a 30-50 km (19-31 mile) radius with 70 to 75
    percent accuracy. The weather forecast is always
    displayed.



    Press SNOOZE to silence it for 8 minutes.

    OR


    SUNNY
    Press any key except SNOOZE to mute the alarm
    and activate it again after 24 hours.

    PARTLY
    CLOUDY

    CLOUDY

    If no button is pressed, the alarm will automatically
    silence after 2 minutes. It will then sound again after 8
    minutes.

    12
    BAR623P_EN_R2.p65

    12

    7/27/04, 12:40 AM

    RAINY



  • Page 13

    EN

    TEMPERATURE

    MOON PHASE

    This product can display current, minimum, and
    maximum temperature information collected by the
    remote sensor and main (indoor) unit.

    The Calendar must be set for this feature to work, see
    “Set Clock” section.


    Outdoor data is collected and displayed every 40
    seconds. Indoor data is collected and displayed every
    10 seconds.



    Press or to view the moon phase for the next
    or previous day.
    Press and hold or to scan quickly through
    the years (2001 to 2099).
    New Moon

    SELECT TEMPERATURE UNIT

    Waxing Crescent

    Slide the °C / °F switch into the desired location. The
    switch is located in the main unit battery compartment.
    The setting for the main unit overrides the remote sensor
    setting.

    First Quarter
    Waxing Gibbous
    Full Moon
    Waning Gibbous

    MINIMUM / MAXIMUM RECORDS

    Last-quarter

    The MEM button is located in the main unit battery
    compartment. Press MEM to toggle between current,
    maximum (MAX) and minimum (MIN) records. To clear
    the records, press and hold MEM for 2 seconds. A beep
    will sound to confirm that the memory has been cleared.

    Waning Cresent

    BACKLIGHT
    Press SNOOZE / LIGHT to activate the backlight for 8
    seconds.

    13
    BAR623P_EN_R2.p65

    13

    7/27/04, 12:40 AM



  • Page 14

    EN

    RESET SYSTEM

    You can also:
    • Adjust the FOCUS knob to make the image
    clearer.
    • Adjust the IMAGE ROTATION knob to rotate the
    image clockwise or anti-clockwise.
    • Manually tilt the projection unit to position the
    image vertically upwards or downwards.

    The RESET button is located in the main unit battery
    compartment. Press RESET when you change the
    batteries and whenever performance is not behaving as
    expected (for example, unable to establish radio
    frequency link with remote sensor or clock).

    PROJECTION UNIT

    SAFETY AND CARE

    The projection unit can display both time and outdoor
    temperature. To use this feature:


    Clean the product with a slightly damp cloth and alcoholfree, mild detergent. Avoid dropping the product or
    placing it in a high-traffic location.

    Press the SNOOZE / LIGHT button to project
    the time and outdoor temperature for 8 seconds.

    OR


    WARNINGS
    This product is designed to give you years of service if
    handled properly. Oregon Scientific will not be
    responsible for any deviations in the usage of the device
    from those specified in the user instructions or any
    unapproved alterations or repairs of the product. Observe
    the following guidelines:

    Slide the PROJECTION switch to ON to activate
    continuous projection. However, this function will
    not work unless the AC / DC adaptor is used.

    14
    BAR623P_EN_R2.p65

    14

    7/27/04, 12:40 AM



  • Page 15

    EN









    TROUBLESHOOTING

    Never immerse the product in water. This can
    cause electrical shock and damage the product.
    Do not subject the main unit to extreme force,
    shock, or fluctuations in temperature or humidity.
    Do not tamper with the internal components.
    Do not mix new and old batteries or batteries of
    different types.
    Do not use rechargeable batteries with this
    product.
    Remove the batteries if storing this product for a
    long period of time.
    Do not scratch the LCD display.

    PROBLEM
    Calendar

    SYMPTOM
    Strange date /
    month

    REMEDY
    Change
    language ( 11)

    Clock

    Cannot adjust
    clock

    Disable clock
    ( 10)

    Cannot autosynchronize the
    date and time

    1. Adjust
    batteries ( 6)
    2. Press RESET
    ( 14)
    3. Manually
    activate clock
    feature ( 11)
    Temperature is
    out-of-range

    Temp

    Shows “LLL” or
    “HHH”

    Check batteries
    ( 8)

    Remote sensor

    Cannot locate
    remote sensor

    Check location
    ( 9)

    Data does not
    match main unit

    Initiate a manual
    sensor search
    ( 10)

    NOTE The technical specification of this product and
    contents of this user guide are subject to change without
    notice. Images not drawn to scale.

    15
    BAR623P_EN_R2.p65

    15

    7/27/04, 12:40 AM



  • Page 16

    EN

    SPECIFICATIONS

    Display

    Rainy, cloudy, partly
    cloudy, sunny

    MAIN UNIT DIMENSIONS
    LxWxH

    Weight

    92 x 167 x 53 mm
    (3.6 x 6.6 x 2.1 inches)

    REMOTE SENSOR (THN122N)

    228 grams (8.04 ounces)
    without battery

    RF frequency

    433 MHz

    Range

    30 metres (98 feet)
    with no obstructions

    Transmission

    Every 40 seconds

    Channel No.

    1

    REMOTE SENSOR DIMENSIONS
    LxWxH

    92 x 60 x 20 mm
    (3.6 x 2.4 x 0.79 inches)

    Weight

    63 grams (2.22 ounces)
    without battery

    CLOCK / PROJECTOR
    TEMPERATURE
    Unit

    °C / °F

    Indoor range

    -5°C to 50°C
    (23°F to 122°F)

    Outdoor range

    -20°C to 60°C
    (-4°F to 140°F)

    Resolution

    0.1°C (0.2°F)

    RF Clock

    Auto or manual (disabled)

    Clock display

    HH:MM:SS

    Hour format

    12hr AM / PM
    (Model BAR623PU)
    24hr (Model BAR623P)

    16
    BAR623P_EN_R2.p65

    16

    7/27/04, 12:40 AM



  • Page 17

    EN

    Calendar

    ABOUT OREGON SCIENTIFIC

    DD / MM; weekday in
    5 languages (E, D, F, I, S)

    Alarm

    Single alarm with
    2-minute crescendo and
    8-minute Snooze

    Projector

    Outdoor temperature
    and time

    POWER
    Main unit batteries

    3 x UM-3 (AA) 1.5V

    Sensor batteries

    2 x UM-4 (AAA) 1.5V

    AC / DC adaptor

    4.5V with jack

    Visit our website (www.oregonscientific.com) to learn
    more about Oregon Scientific products such as digital
    cameras; MP3 players; children's electronic learning
    products and games; projection clocks; health and fitness
    gear; weather stations; and digital and conference
    phones. The website also includes contact information
    for our customer care department in case you need to
    reach us, as well as frequently asked questions and
    customer downloads.
    We hope you will find all the information you need on
    our website, however if you'd like to contact the Oregon
    Scientific Customer Care department directly, please visit
    www2.oregonscientific.com/service/support or call 949608-2848 in the US. For international enquiries, please
    visit www2.oregonscientific.com/about/international/
    default.asp.

    NOTE It is recommended that you use alkaline batteries
    with this product for longer performance.

    17
    BAR623P_EN_R2.p65

    17

    7/27/04, 12:40 AM



  • Page 18

    EN

    EC-DECLARATION OF CONFORMITY

    Additional information:
    The product herewith complies with the requirements of
    the Low Voltage Directive 73 / 23 / EC, the EMC Directive
    89 / 336 / EC and carries the CE marking accordingly.

    This product contains the approved transmitter module
    that complies with the essential requirements of Article
    3 of the R&TTE 1999 / 5 / EC Directive, if used as
    intended and the following standards have been applied:
    Safety of information technology equipment
    (Article 3.1.a of the R&TTE Directive)
    Applied Standard

    EN 60950: 2000

    Carmelo Cubito
    Agrate Brianza (MI) / Italy January 2004
    Manufacturer’s EU R&TTE Representative

    Electromagnetic compatibility
    (Article 3.1.b of the R&TTE Directive)
    Applied Standards
    ETSI EN 301 489-1-3 (Ver.1.4.1): 2002-08

    COUNTRIES RTTE APPROVAL COMPLIED
    All EC countries, Switzerland
    and Norway N

    Efficient use of radio frequency spectrum
    (Article 3.2 of the R&TTE Directive)
    Applied Standards
    ETSI EN 300 220-3 (Ver1.1.1): 2000-09

    18
    BAR623P_EN_R2.p65

    18

    7/27/04, 12:40 AM



  • Page 19

    EN

    Wireless Weather Station
    Model: BAR623P / BAR623PU
    User Manual
    19
    BAR623P_EN_R2.p65

    19

    7/27/04, 12:40 AM






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Oregon Scientific BAR623P wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Oregon Scientific BAR623P in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 0,71 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Oregon Scientific BAR623P

Oregon Scientific BAR623P Bedienungsanleitung - Deutsch - 19 seiten

Oregon Scientific BAR623P Bedienungsanleitung - Holländisch - 19 seiten

Oregon Scientific BAR623P Bedienungsanleitung - Französisch - 19 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info