Bedienungsanleitung Oregon Scientific BAR636 (Seite 5 von 10) (Englisch)

520318

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

For best results:

• Insert the batteries and select the channel before you

mount the sensor.

• Place the sensor out of direct sunlight and moisture.

• Do not place the sensor more than 30 metres (98

feet) from the main (indoor) unit.

• Position the sensor so that it faces the main (indoor)

unit, minimizing obstructions such as doors, walls,

and furniture.

• Place the sensor in a location with a clear view to the

sky, away from metallic or electronic objects.

• Position the sensor close to the main unit during cold

winter months as below-freezing temperatures may

affect battery performance and signal transmission.

You may need to experiment with various locations to

get the best results.

DATA TRANSMISSION

Data is sent from the sensor(s) every 40 seconds. The

reception icon shown in the Temperature Area shows

the status.

ICON DESCRIPTION

Main unit is searching for

sensors.

At least 1 Channel has been

found.

Channel 1 is selected

(number will change

depending on the sensor

you select).

--- shows in Outdoor The selected sensor cannot

Temp Area be found. Search for the

sensor or check batteries.

SEARCH FOR SENSOR

To search for a sensor, press and hold MEMORY and

CHANNEL (on the main unit) for 2 seconds.

NOTE If the sensor is still not found, check the batteries,

obstructions, and remote unit location.

NOTE Signals from household devices such as

doorbells, electronic garage doors, and home security

systems may cause temporary reception failure. This is

normal and does not affect general product performance.

The reception will resume once the interference ends.

CLOCK

The clock automatically synchronizes the current time

and date when it is brought within range of the radio

signal DCF77 generated from Frankfurt, Germany for

Central Europe (model BAR636) or MSF60 generated

from Rugby, England (model BAR636U).

NOTE The signals are collected by the main unit when

it is within 1500 km (932 miles) of a signal.

Initial reception takes 2-10 minutes, and is initiated when

you first setup the unit, and whenever you press RESET.

Once complete, the reception icon will stop blinking. The

icon is shown in the Clock Area.

TURN CLOCK ON / OFF

Perform this step if you cannot receive clock signals.

Press and hold for 2 seconds. Then, manually set

the clock following the "Set Clock" instructions (below).

To force a manual search for clock signals, press and

hold for 2 seconds. If no signal is found, check the

batteries.

The signal icon indicates that the clock feature is

ON. No icon means that it is OFF.

STRONG SIGNAL WEAK SIGNAL NO SIGNAL

SET CLOCK / CALENDAR

You only need to do this if you have disabled the RF

clock feature (for example, if you are too far from or

cannot receive a signal).

1. Press and hold MODE for 2 seconds. The Clock Area

will blink.

2. Select the hour, minute, year, month, day, and day

of the week language. Press or to change

the setting.

3. Press MODE to confirm.

The language options are (E) English, (F) French, (D)

German, (I) Italian, and (S) Spanish.

SWITCH CLOCK DISPLAY

Press MODE to toggle between Clock with Seconds and

Clock with Weekday display.

BAR636_EN.p65 2005.2.22, 3:08 PM5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oregon Scientific BAR636 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oregon Scientific BAR636

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info