Bedienungsanleitung Oregon Scientific BAR936HG (Seite 11 von 15) (Englisch)

589371

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

ZONE

WET

COM

TEMPERATURE HUMIDITY

Any

>70%

20-25°C

(68-77°F)

40-70%

DRY

Any

<40%

This information is shown in the Humidity Area

when the current measurement is displayed.

HEAT INDEX

The Heat Index advises 4 levels of warning if the

temperature is high.

NOTE

DANGER

CATEGORY

TEMPERATURE

°C

°F

>54.5 >130

40.5-54.4

105-130

Extreme danger

Danger

32.2-40.5 90-105Extreme Caution

26.6-32.2 80-90Caution

To display the Heat Index:

1. Press SELECT to navigate to the Temperature Area.

will show next to the Area.

2. Press MODE to reach the Heat Index display.

3. Press CHANNEL to select the desired channel.

If the temperature is below 26°C / 80°F, or the

desired channel is not working, the Heat Index will

display "NA".

TALKING CLOCK

Your clock can keep you informed of the time,

temperature, humidity and weather forecast by the press

of a button or at pre-set times.

To use any talking function, the AC adaptor must

be connected.

NOTE

ENABLE / DISABLE TALK FUNCTION

To enable or disable the talk function:

• Plug or unplug the adaptor.

• Press and hold UP and DOWN for 3 seconds.

will appear in the bottom, right-hand corner of the

LCD display when the talk function is enabled.

If you are using the adaptor and want to turn

the talk function OFF, then press and hold UP and

DOWN for 3 seconds.

USING THE TALK FUNCTION

To instantly hear the current time, indoor temperature,

humidity and weather forecast, press and hold

SNOOZE / LIGHT for 3 seconds.

To hear the time, temperature, humidity and weather

forecast every hour for a set period of time i.e. 6pm to

10pm, or once every 24 hours:

1. Press SELECT to navigate to the Clock / Alarm Area.

2. Press and hold MODE for 2 seconds.

3. Press MODE to scroll through until you reach the

talk setting, (it appears immediately after display

language).

4. Select 1hr or 24hr broadcast, talk start-time, talk stop-

time and talk volume.

5. Press UP or DOWN to change the setting.

6. Press MODE to confirm.

If you select the 24-hour talk function, you do

not need to enter a talk stop-time.

TALK VOLUME

The talk function icon appears in the bottom, right-hand

corner of the LCD display.

NOTE

ICON VOLUME LEVEL

Low

Medium

High

See "Using the Talk Function" section for how to adjust

the volume.

MESSAGE DISPLAY

Your clock can display messages and warnings in

5 languages. If a warning is being issued

will

flash.

To display messages:

Press MESSAGE, the display box text will flash for

5 seconds and then the message will scroll across the

display.

TEMPERATURE AND HUMIDITY TREND

The trend lines are shown next to the temperature and

humidity readings.

TREND

TEMPERATURE

HUMIDITY

RISING STEADY FALLING

COMFORT ZONE

The Comfort Zone indicates how comfortable the

climate is, based on current temperature and humidity

measurements.

BAR933HG Eng R4 7/26/04, 9:26 PM10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oregon Scientific BAR936HG Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oregon Scientific BAR936HG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info