589105
6
Zoom out
Zoom in
Vorherige Seite
1/8
Nächste Seite
6
GB
To stop the alarm, press [ ] or [SNOOZE]. If [SNOOZE]
button is pressed, the alarm sound will be turned off temporarily
and the snooze function will be activated. The alarm will go off
again after approx. 8 minutes until other key is pressed to turn off
the alarm.
RESETTING THE UNIT
In case of malfunction or abnormal display, press the [RESET]
button at the bottom of the unit wth a blunt stylus. All settings will
be cleared and reset to their default values.
HOW TO USE THE GUIDING LIGHT
RM813P/ RM813PU is equipped with a guiding light. To test the
functionality of the guiding light or to turn it on temporarily, press
the [TEST] button with a blunt stylus at the bottom of the unit. The
light will be on as long as the button is pressed and held.
For continuous use of the guiding light, AC Power adapter is
required to be connected. For instructions on how to install the
adapter, please see Section “How to Use the Projector with Power
Adapter”.
Once the power adapter is in place, slide the [LIGHT ON] switch at
the side of the unit to the back to turn on the guiding light for a
longer time. To turn the light off, simply slide the switch to the
opposite direction.
Note that this switch can only be used when the power adapter is
installed. For test or momentary light-on, use the [TEST] instead.
HOW TO CHANGE
THE GUIDING LIGHT BULB
RM813P/ RM813PU is pre-installed with a 3V lightbulb. In case
you want to change the lightbulb follow the instructions below:
1. Un-install the power adapter from the unit to prevent electric
shock. Remove the batteries from the battery compartment as
well.
2. Remove the tail of the unit as shown.
3. Then, remove the lightbulb by rotating it in a anti-clockwise
direction.
4. Replace with new lightbulb with correct specifications. Make
sure the lightbulb is securely fixated.
5. Replace the tail of the unit as shown.
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Oregon Scientific RM813P wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Oregon Scientific RM813P

Oregon Scientific RM813P Bedienungsanleitung - Holländisch - 8 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info