Bedienungsanleitung Oregon Scientific WMR918 (Seite 7 von 9) (Englisch)

587135

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

3. Press and hold [SET].

4. Press [s] and [t] for the desired setting.

5. Press [SET].

For temperatures and humidity, the high and low alarms can be set

in sequence. After entering the value for one alarm, you will be

prompted to enter the value for the other.

A weather alarm is activated once set. When the set criteria is met,

an alarm will go off and the current reading will flash together with

the corresponding indicator.

If that happens in the outdoor/channel temperature or humidity

window, the “OUT” indicator will flash to show that the criteria set

for the outdoor thermo-hygrometer has been met. If it is one of the

separate sensors, the [CHANNEL] indicator will flash. Press the

window repeatedly to locate the channel in question.

When a weather alarm goes off, press any button to stop the alarm.

The alarm is still active until you deactivate the function or the

criteria is no longer met.

To do so,

1. Press the window containing the weather element you want to

set.

2. Press [ALARM].

3. Press [ALARM ON/OFF] to deactivate the function.

To turn on the function again, simply follow the same procedure

and press [ALARM ON/OFF].

DISCONNECTED SIGNALS

If without obvious reason the display for the main unit goes blank

or “

” are displayed, press and hold [CHANNEL] to enforce an

immediate search.

If that fails, check:

- All weather instruments are still in place.

- The batteries of the main unit and individual weather instruments

are still good. Replace them if necessary. Press and hold

[CHANNEL] to enforce an immediate search afterwards.

- The transmission is within range and path is cleared of obstacles

and interference. Shorten the distance if necessary.

Then press and hold [CHANNEL] again. The main unit will start

searching for all previously locked weather instruments.

If you want to add an new sensor, press the reset button on the new

sensor and then press channel to enforce the main unit to search.

Note: 1. Do not reset the sensors after the main unit has locked

those sensors, otherwise the main unit will no longer

receive the signal from those sensors.

2. If you have disconnected signals, you cannot clear the

memory.

THE RESET BUTTON

This button is only used when the system is operating in an

unfavorable way or malfunctioning. Use a blunt stylus to hold

down the button. The main unit will return to all default settings

and start searching for signals again.

Before resetting the main unit, you should do the same for all

weather instruments to ensure correct transmission and reception

of signals. Then press reset on the main unit.

SPECIFICATIONS

Temperature

Proposed Operating Range : Indoor ..... -5°C to 50°C

( 23°F to 122°F )

: Outoor ..... -20°C to 60°C

( -4°F to 140°F )

Resolution : 0.1°C (0.2°F)

(indoor and outdoor)

Relative Humidity

Measuring Range : 2 to 98% RH

(indoor and outdoor)

Resolution : 1% RH

(indoor and outdoor)

Dew Point Temperature

Measuring Range : Indoor ..... 0°C to 49°C

( 32°F to 120.2°F )

: Outoor ..... 0°C to 59°C

( 32°F to 138.2°F )

Resolution : 1°C (2°F)

(indoor and outdoor)

Barometric Pressure / Trend

Measuring Range : 795 to 1050 mb

(23.48 to 31.01 inHg)

Resolution : 1 mb (0.03 inHg)

Wind Speed

Measuring Range : 0 to 56 m/s (0 to 125.3 mph)

Resolution : 0.2 m/s (0.4 mph) (typical)

Wind Direction

Measuring Range : 0° to 359° (Degrees)

Digital Resolution : 1° (typical)

Graphical Resolution : 10°

Wind Chill Temperature

Measuring Range : -52°C to 60°C (-61.6°F to 140°F)

Resolution : 1°C (2°F)

Rainfall

Daily and Cumulative : 0 to 9999 mm (0 to 393.7 in)

Measuring Range

Rainfall Rate : 0 to 999 mm/hr (0 to 39.37 in/hr)

Measuring Range

Daily and Cumulative : 1 mm (0.04 inch)

Resolution

Rainfall Rate Resolution : 1mm/hr (0.04 m/h) typical

WMR918 :

Weight : 505 g

Dimension : 204 (L) x 139 (W) x 39 (H)

Power : 12V AC / DV adapter

Power backup : 4 x UM3 - “AA” size alkaline battery

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oregon Scientific WMR918 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info