649976
4
Zoom out
Zoom in
Vorherige Seite
1/22
Nächste Seite
-carbon battery
1.5V
(GP 15G R4P)
Controller (transmitter)
operation time: 18
hours
Non rechargeable (do not
charge)
5. TRANSMITTER AND RECEIVER SYNCHRONIZATION
Step 1
Connect the battery to the drone
in order to power it on. Place the drone on a flat
surface to ensure the gyroscope is centered. Do not move the drone during the
synchronization process.
Step 2
Switch the controller's power button to "ON" position. The LED indicator starts to
blink.
Wait 5 seconds until the synchronization process starts.
Push the throttle stick from the lowest to the highest position, and then push it
back to the lowest position. When the LED indicator stops blinking and starts to
glow steadily, and the controller em
its a beep sound, it means that the
synchronization process is finished.
Step 3
After the flight, move the controller's switch to "OFF" position (the power LED is
off). Disconnect the battery to turn the drone off. The lights will go off indicating
that
all the systems are off.
6. FLIGHT CONTROL
Description
Rotate left / right
Ascent / descent
Altitude control (ascent / descent)
Rotate left / right
Fly forward / backward
Left / right
Flying forward / backward
Flying left / right
Speed modes
The device supports two flight/drive speed modes. Press the flight/drive speed button to switch between slow
and fast mode. The number of beeps inform about a currently chosen mode (one beep - slow mode; two
beeps - fast mode).
Flight / drive mode
The device supports both the flight and drive mode. The default mode (after the device is powered on) is the
flight one. To activate the drive mode, press the flight / drive mode button. The remote control beeps twice
indicating the mode change. Press this button again to return to the flight mode. The remote control beeps
once indicating the mode change.
NOTE: to be able to ride on walls and ceilings, activate the flight mode.
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Overmax X-bee drone 2.3 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info