683913

Paladin 972 413 pro Seite 3

3
Zoom out
Zoom in
Vorherige Seite
1/4
Nächste Seite
____________________________________________________________________________________________________________________________________________________________________________________________BA 9724xxpro N;DE,GB -23119- 2014.06-V02
INSTRUCTION MANUAL DIGITAL TWILIGHT SWITCH – PAGE 1 / 2
SAFETY INSTRUCTIONS AND BASICS
Connection power supply / sensor
Safety instructions
CAUTION!
DANGER OF LIFE / RISK OF FIRE AND ELECTRIC SHOCK!
Installation and assembly of electrical equipment must be carried out only by a skilled person!
Connect the supply voltage/frequency as stated on the product!
Disconnect device / sensor from power supply for wiring and installation purposes! Check power supply is disconnected!
Only connect the sensor which is included in delivery!
No safe electrical isolation between the power supply and the light sensor! No low voltage protection!
Secure the connecting cable between installation device and digital sensor from impermissible/unintentional removal!
The safety precautions of DIN VDE 0100, electric shock, and fire danger have to be met.
Defective devices / sensors have to be put out of service immediately!
Warranty void if housing opened by unauthorised person!
The electronic circuit is protected a
gainst a wide range of external influences. Incorrect operating may occur if external influences exceed certain limits!
Installation and assembly of electrical equipment must be in accordance with local building and electrical codes!
Usage / disposal
The digital twilight switch is intended for installation on DIN-Rail and for lighting control.
The device and the included battery are to be disposed in an environment-friendly way and according to current law.
Connection diagram 1 channel version / 2 channels version
1 channel
*Optional / depending on version
2 channels
Menu overview
Symbol legend
*Optional / depending on version
Power plug symbol (flashing / alternating with text display): While the power supply is
disconnected, the display shows a power plug symbol (flashing). The time switch is then
operated in the reserve mode. Press -button for 1 sec. to “wake up” the time switch.
/
Channel is switched ON / Channel is switched OFF.
Current state is based on a manual over-ride.
Current state is based on a programmed ON or OFF switching time.
Current state is based on twilight switching according to the set LUX switching threshold in the
morning and the LUX switching threshold in the evening.
Sun symbol = LUX switching threshold in the morning exceeded
Moon symbol = LUX switching threshold in the evening exceeded
Current state is based on a permanent program.
Sensor: Displays the current LUX value / sensor value (8 levels)
Limit: Display of the LUX threshold value (flashes during delay time)
Days of the week Monday, Tuesday, ... Sunday;
The underscores indicate if the program is active for the days above.
Display of the menu size.
LX
Display of the lux value.
The time switch is locked; to unlock the device the PIN has to be entered.
Key function
Channel
ON
OFF
/ manual permanent switching P
Automatic-Mode
Enter-Mode
Channel ON OFF
By pushing -button ( -button) a manual switch of the channel takes place. The resulting
switching status is marked
with the hand-symbol and remains until the next programming step / twilight switching occurs. (temporary over-ride)
Permanent switching status
P
By pressing the channel button for more than 3 sec. the channel is permanently switched ON or OFF. The status
remains until the next manual switching occurs (> 3 sec.). (permanent over-ride)
To access the Enter-mode (program, adjustments, options)
from the automatic-mode.
To revert to the beginning of the current (sub-) menu.
To switch the channel ON or OFF until the next
programming step occurs.
To adjust the flashing digit. To scroll through a choice.
Without power supply
: Activate the twilight switch.
Power supply operation: Info about current Lux value.
To confirm the selection or the entered data.
INITIAL OPERATION / LIGHT ADJUSTEMENTS
Initial operation
Menu light
ADJUSTMENTS -> LIGHT -> …
LUX SWITCHING THRESHOLD:
You can select the threshold for the twilight switching according to a light
value in the morning (threshold morning) and the evening (threshold evening).
[Default threshold morning: 20 LUX / Default threshold evening : 20 LUX]
LUX DELAY TIME: It is possible to set a delay to avoid undesirable switching due to disturbing light
sources, e.g., car lights, or lightning. [Default: 1 minute]
LUX HYSTERESIS:
It is possible to set a hysteresis to avoid undesirable switching due to disadvantageous
positioning of the sensor, e.g., close to a yard light. [Default: 25%]
Typical brightness values:
Bright sunny day
100.000 lx
Overcast summer day
20.000 lx
In the shade in summer
10.000 lx
Overcast winter day
3.500 lx
Large football stadium
1.400 lx
TV studio lighting
1.000 lx
Room lighting / Office Lighting
800 lx
Corridor lighting
100 lx
Street lighting
10 lx
Candle 1 metre away
1 lx
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Paladin 972 413 pro wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info