Bedienungsanleitung Panasonic AG-DVC 20p (Seite 38 von 42) (Englisch)

597929

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

Others

Do not throw old battery into fire.

≥Heating a battery or throwing it into a fire may result in an

explosion.

≥If the operating time is very short even after the battery has

been recharged, the battery has worn out. Please purchase a

new battery.

About the AC adapter

≥If the battery is warm, charging requires more time than

normal.

≥If the temperature of the battery is extremely high or

extremely low, the [CHARGE] lamp may continue flashing,

and the battery may not be charged. After the battery

temperature has decreased or increased sufficiently,

recharging starts automatically. So, wait for a while. If the

lamp still continues flashing even after the recharging, the

battery or AC adapter may be faulty. If so, please contact a

dealer.

≥If you use the AC adapter near a radio, radio reception may

be disturbed. Keep the AC adapter 1 m (3 feet) or more away

from radio.

≥When using the AC adapter, it may generate whirring sounds.

However, this is normal.

≥After use, be sure to pull out the AC mains lead from the AC

mains socket. (If they are left connected, a minute amount of

current is consumed.)

≥Always keep the electrodes of the AC adapter and battery

clean.

About the cassette

Never place the cassette in a high temperature place.

≥The tape may be damaged, producing mosaic-like noise at

the time of playback.

When storing the cassette after use, be sure to rewind the

tape to the beginning and take it out.

≥If the cassette is left for more than 6 months (depending on

the storage condition) in the camera-recorder or stopped

midway, the tape may sag and be damaged.

≥Once every 6 months, wind the tape to the end and then

rewind it to the beginning. If the cassette is left for 1 year or

longer without winding or rewinding, the tape may be

deformed by expansion or shrinkage attributable to

temperature and humidity. The wound tape may stick to itself.

≥Dust, direct sunlight (ultraviolet rays), and humidity may

damage the tape. Such usage may cause damage to the

camera-recorder and the heads.

≥After use, be sure to rewind the tape to the beginning, put the

cassette in the case to protect it from dust, and store it

upright.

Keep the cassette away from strong magnetism.

≥Apparatuses using magnets such as magnetic necklaces and

toys have magnetic force that is stronger than expected, and

they may erase the contents of a recording or may increase

noise.

LCD monitor/viewfinder

LCD monitor

≥When the LCD monitor gets dirty, wipe it with a dry soft cloth.

≥In a place with drastic temperature changes, condensation

may form on the LCD monitor. Wipe it with soft dry cloth.

≥If your camera-recorder is extremely cold, the LCD monitor is

slightly darker than usual immediately after you turn the

power on. However, as the internal temperature increases, it

goes back to normal brightness.

Viewfinder

≥To remove dust from inside the viewfinder, dismount the

viewfinder first. When the dust is difficult to remove, get rid of

it with a cotton swab dampened with water. Then wipe the

viewfinder with a dry cotton swab.

≥To clean the inside of the Viewfinder, remove the Eyecup 1,

then keep pressing 2 and pull the cover 3 out.

Periodical check-ups

≥To maintain the highest image quality, we recommend

replacing worn parts such as heads after approx. 1000 hours

of use. (This, however, depends on operating conditions

including temperature, humidity and dust.)

Extremely high precision technology is employed to

produce the LCD monitor screen featuring a total of

approximately 113,000 pixels. The result is more than

99.99% effective pixels with a mere 0.01% of the pixels

inactive or always lit. However, this is not a malfunction

and does not affect the recorded picture.

Extremely high precision technology is employed to

produce the viewfinder screen featuring a total of

approximately 113,000 pixels. The result is more than

99.99% effective pixels with a mere 0.01% of the pixels

inactive or always lit. However, this is not a malfunction

and does not affect the recorded picture.

The range of view shown in the LCD or viewfinder is

slightly narrower than that outputted from the video

output socket.

DVC20_Eng.book 38 ページ２００６年４月６日　木曜日　午前１０時１０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic AG-DVC 20p Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info