597931
77
Zoom out
Zoom in
Vorherige Seite
1/82
Nächste Seite
TROUBLE-
SHOOTING
77
SPECIFI-
CATIONS,
OTHER
Condensation
How to find out whether there is condensation
inside and what to do about it if it has formed
If the condensation mark blinks after the camera-
recorder’s power has been turned on, it means that
condensation has formed inside the camera-recorder.
If this has happened, the power is automatically turned
off within a matter of seconds.
Take the following action.
Remove the cassette
No other functions will be operational. It may not
even be possible to remove the cassette tape
depending on the amount of condensation. If this is
the case, wait two to three hours before removing
the cassette.
Wait two to three hours with the cassette holder
open.
The time you need to wait will differ depending on
the amount of condensation and the ambient tem-
perature.
Turn on the power two to three hours later and
check whether or not the condensation display
has gone off.
To make doubly sure, wait another hour or so after
the condensation display has gone off before using
the camera-recorder again.
Also remember that even when the condensation
display has not appeared, condensation may be
forming.
Condensation builds up gradually so the condensa-
tion display may not appear for 10 to 15 minutes
after it has started to form inside.
In very cold areas, the condensation may freeze. If
this happens, it will take another two to three hours
for it to thaw out.
Tally lamp
System resetting
1
2
3
The tally lamp can be made to light up during shooting by selecting
“ON” as the REC LAMP item (P72) setting on the OTHER FUNC-
TIONS screen.
When the camera-recorder is in any of the following statuses, the
tally lamp blinks.
When the remaining charge of the battery is low
When there is not much tape left
When trouble has occurred in the tape transport system
When an operation initiated by the remote control unit has been
received
When the camera-recorder’s mode is being switched to shooting
Tally lamp
Reset the system microcomputer if you can no longer operate the
camera-recorder even though its power is on or a similar kind of a
problem has occurred.
Use a pointed object to press the RESET button on the camera-
recorder. This will reset the system microcomputer.
The menu settings entered and memory contents will not be cleared
even when the system is reset.
Do not press the RESET button when the camera-recorder is
operating normally.
CH1
CH2
AUDIO LEVEL
REC
MODE CHKSNS
OISZEBRA
RESETCOUNTER
ZOOM SPEED
OFF/M
H
L
AUDIO IN
FRONT
REAR
CH1 CH2
MIC
MIC
LINE
RESET
FOCUS USER 2
SEARCH
MANUAL
MENU
VOL/JOG
SEARCHD.ZOOM
USER 3
STILL
WHITE BAL
AUTO
PUSH
SHUTTER/IRIS
RESET button
77

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic AG-DVC 60p wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info