Bedienungsanleitung Panasonic es7038 pro curve (Seite 4 von 55) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

369871

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

The battery capacity monitor indi-

cates the charge remaining in the

battery in 3 levels “high/mid/low”

(high/mid/low). The unit can be used

once or twice more after the “low”

(low) starts to blink. (Differs depend-

ing on the use situation.)

[for ES7036]

The charge status lamp will glow

when the shaver is being charged. It

will blink when the charging is com-

pleted (see fig. 2 (D)).

You can fully charge the shaver in 1

hour if the low battery indicator blinks

(see fig. 2 (C)).

The unit can be used once or twice

more after the low battery indicator

starts to blink.

A full charge will supply enough

power for approx. 14 shaves (3 min-

utes per shave for a normal beard).

Before travelling, charge it fully for 1

hour if you will not be taking the adap-

tor with you.

In case your shaver is without charge,

you may quick charge it for 1 shave

in about 5 minutes.

Using your shaver

Caution – The system outer foil is

very thin and can be damaged if

handled improperly. Before each

use, always check the foil for dam-

age. To avoid personal injury, do not

use if the foil or other parts of the

shaving head is damaged.

Depress the switch lock button and

slide the On/Off switch upward to turn

the shaver on.

Hold the shaver at a right angle (90°)

to your skin (see fig. 3). Start out

shaving by applying gentle pressure

to your face. Stretch your skin with

your free hand and move the shaver

back and forth in the direction of your

beard. You may gently increase the

amount of pressure as your skin be-

comes accustomed to this shaver.

Applying excessive pressure does

not provide a closer shave.

System outer foil

(see fig. 4)

System outer foil has a slit blade (a)

between 2 foils (b). They move up

and down independently to follow the

contours of your face.

The slit blade catches and cuts

longer and lying hairs easily.

For wet shaving

Put a thin layer of shaving foam

on your face which works as a lu-

bricator. Shaving foam is the most

suitable among many other shav-

ing aids (gel, soap, cream, etc.).

Do not put a thick layer of shaving

foam as it may affect shaver’s per-

formance. If the shaving head is

clogged with foam, simply rinse

it under running water.

Using the trimmer

(see fig. 5)

Slide the trimmer handle up to open

the trimmer.

Place the trimmer at a right angle to

your skin and move it downward to

trim sideburns.

Cleaning your shaver

(see fig. 6)

Warning – To prevent electric

shock or personal injury, discon-

nect the power cord from the

shaver before cleaning with water.

For cleanliness and convenience, we

recommend that you clean your

shaver with water and a liquid hand

soap. Regular cleaning will keep your

shaver in good condition while pre-

venting odors or bacteria from devel-

oping, and maintain the cutting per-

formance.

With the system outer foil in place,

apply some hand soap onto the outer

foil.

Turn the shaver on and pour some

water over the outer foil.

After about 10-20 seconds, turn the

shaver off.

Remove the foil frame and clean

it with running water.

Wipe off any moisture from the

shaver with a dry cloth and remove

the protective cap to allow the sys-

tem outer foil to dry completely.

Brush cleaning

Squeeze the foil frame release but-

tons and lift the foil frame upward to

remove it (see fig. 8). Remove the in-

ner blades one at a time by grasping

it firmly at both ends and pulling it

straight away from the shaver. Clean

the outer foils, the shaver body and

the trimmer with the long brush (see

fig. 9). Clean the inner blades with

the short brush by moving it in the

direction in fig. 10 (A). Do not move

the brush in the direction in fig. 10

(B), as it will damage the inner blade,

and its cutting performance. Do not

use the short brush to clean the outer

foils.

Replacing shaving head

components

It is recommended that you replace

the system outer foil at least once a

year and the inner blade at least once

every 2 years to maintain your shav-

er’s cutting performance.

Replacing the system outer foil

(see fig. 7)

Squeeze the system outer foil re-

lease buttons and lift the system

outer foil upward to remove it. To in-

sert the new system outer foil, press

down until it snaps into place.

Replacing the inner blades

(see fig. 8)

Squeeze the foil frame release

buttons and lift the foil frame

upward to remove it. Remove the

inner blade one at a time by

grasping it firmly at both ends

and pulling straight away from

the shaver.

Do not touch the metal parts of inner

blades.

To insert the new inner blade, hold

the blade one at a time at both ends

and press downward until it snaps

into the shaver.

P006-039_ES7038_36_EU 05.07.26 3:09 ページ6

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic es7038 pro curve Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info