Bedienungsanleitung Panasonic ey 7541 ln (Seite 5 von 140) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

381498

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

Read “the Safety Instructions” booklet

and the following before using.

ADDITIONAL SAFE-

TY RULES

) Wear ear protectors when using the

tool for extended periods.

2) Be aware that this tool is always in an

operating condition, since it does not have

to be plugged into an electrical outlet.

3) When screwing or driving into walls, floors,

etc., “live” electrical wires may be encoun-

tered. DO NOT TOUCH THE SOCKET

OR ANY FRONT METAL PARTS OF THE

TOOL! Hold the tool only by the plastic

handle to prevent electric shock in case

you screw or drive into a “live” wire.

4) Do NOT operate the Forward/Reverse

lever when the main switch is on. The bat-

tery will discharge rapidly and damage to

the unit may occur.

5) During charging, the charger may become

slightly warm. This is normal.

Do NOT charge the battery for a long peri

od.

6) When storing or carrying the tool, set the

Forward/Reverse lever to the center posi-

tion (switch lock).

7) Do not strain the tool by holding the speed

control trigger halfway (speed control

mode) so that the motor stops.

Symbol Meaning

Volts

Direct current

No load speed

… min

-1

Revolutions or reciprocations

per minutes

Electrical capacity of battery

pack

Read the operating instructions

before use.

For indoor use only.

WARNING:

• Do not use other than the Panasonic bat-

tery packs that are designed for use with

this rechargeable tool.

•

Do not dispose of the battery pack in a

fire, or expose it to excessive heat.

•

Do not drive the likes of nails into the battery

pack, subject it to shocks, dismantle it, or

attempt to modify it.

• Do not allow metal objects to touch the

battery pack terminals.

•

Do not carry or store the battery pack

in the same container as nails or similar

metal objects.

•

Do not charge the battery pack in a

high-temperature location, such as next

to a fire or in direct sunlight. Otherwise,

the battery may overheat, catch fire, or

explode.

•

Never use other than the dedicated char-

ger to charge the battery pack. Otherwise,

the battery may leak, overheat, or

explode.

•

After removing the battery pack from the

tool or the charger, always reattach the

pack cover. Otherwise, the battery contacts

could be shorted, leading to a risk of fire.

. ASSEMBLY

NOTE:

When attaching or removing a bit or

socket, disconnect battery pack from

tool or place the trigger switch in the

center position (switch lock).

Attaching or Removing

Socket

1. Attaching Socket

Attach the socket by sliding the female

detent on the bottom of the socket to the

square drive on the body.

Make sure the

socket is firmly

connected to

the body.

2. Removing Socket

Pull out the socket.

NOTE:

Attaching or Removing Original Options

and Sockets

Keep the body above freezing point

(0°C 32°F) when attach or detach

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic ey 7541 ln Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info